Tannoy ELLIPSE-10

A fully time-aligned, 3-way active system utilising Dual Concentric™ plus SuperTweeter™ drive units, the Ellipse 10 has a frequency response extending to above 50kHz for monitoring of wideband programme material.

Ninety degree horizontal dispersion gives you a wide sweet spot for practical working across the console, while analogue signal processing achieves an exceptionally flat frequency response in use.

Discrete MOSFET power amplifiers, with generous power supply, provide more than ample power with extremely low noise and distortion.

The unique cabinet shape not only has a striking appearance but is inherently stiff. Constructed of laminated birch with a massive MDF baffle and rear panel, the enclosure is non-resonant acoustically and mechanically.

Specifications

• Frequency response: 30Hz - 50kHz
• Maximum SPL: (pair @ 1m) 114dB (anechoic)
• Typical max SPL (pair @ mix position): 118dB
• Distortion: <0.5%
• Driver type: 10" Tannoy Dual Concentric
• SuperTweeter: 1" Wideband SuperTweeter
• Dispersion: 90 degrees horizontal (@6dB)
• Amplifier Input: 22k ohms balanced via XLR
• Input Sensitivity: +4dBu to -10dBu continuous
• Crossover Frequencies: 1.7kHz - 14kHz
• Amplifier Power: LF: 200W/HF: 200W/ST: 30W
• Signal/Noise Ratio: >100dB
• Multi-function LED Indicator - Green: System On; Red: Stabilisation prior to system on. Fault (such as DC), thermal trip, clipping of LF amplifier; Yellow: VLF warning (presence of subsonic signals below 20Hz, increasing in sensitivity down to 1Hz)
• Trim Controls - Hi: Shelving filter +/-3dB @ 25kHz (+/-1dB @ 4.5kHz); Mid: Bell filter +/-2dB @ 1.4kHz, 0.45Q; Low: Variable alignment LF hi-pass filter +/-3dB @ 45Hz (+/-1dB @ 90Hz)
• Enclosure Type: Laminated birch, reflex ported
• Volume: 32.6 Litres
• Dimensions: 16 5/8" x 21 1/4" x 15"
• Weight: 46.2 lbs
• Finish: Grey suede paint (black on SuperTweeter)
• Front Baffle: Panel MDF