Sanken CUB-01PTBE
Cardiod Boundry Microphone, Pigtail, Beige (Shown Grey)

CUB-01PTBE

The Sanken CUB-01 offers a totally new design that overcomes the limitations of previous boundary microphones. Generally speaking, most boundary microphones have almost the same sound characteristics, heard as "thin," "solid," and "metallic." Using Sanken's advanced technology, the CUB-01 has resolved this problem with its unique square-shaped cardioid capsule. This proprietary design significantly enlarges the effective area of the diaphragm, resulting in a boundary microphone whose sound is rich and natural, with a flat response to 70Hz. Now it is possible to capture a "full bodied" and "clear" sound - human narration and dialogue are clearly caught while excluding unnecessary background noise.

Sanken's revolutionary design has also eliminated the artificial need to overdesign the acoustic construction to create cardioid directivity.

Engineered for use in many situations, from TV and film field shooting to broadcast studio production and conference table recording, the CUB-01 departs from the common design of the boundary mic, which typically requires a large, heavy plate. By comparison, the CUB-01 is unbelievably small ( 32.5mm diameter, 14mm height, 45g weight ) and light. Because of its size, it is easy to conceal from the camera, and can be positioned in a variety of environments, for example, attached to the roof of a car with double-sided sticky tape.

Specifications

• Transducer Type : Back electret condenser
• Directivity : Cardioid/front side of hemisphere
• Sensitivity : At 3V 15mV(-36.5dB±2dB)/Pa (0dB=1V/Pa); At 12V16.8mV(-35.5dB±2dB)/Pa (0dB=1V/Pa)
• Equivalent Noise Level : At 3V less than 17dB(A-weighted) IEC 179; At 12V lessthan 16dB(A-weighted) IEC 179
• Max SPL : At 3V 121 dB SPL (THD 1%, 1kHz); At 12V127 dB SPL (THD 1%, 1kHz)
• Output impedance : 120 Ohms (1kHz) Recommended loadimpedance more than 5k Ohms. ?FPRIVATE "TYPE=PICT;ALT="
• Powering : 3V to 14V(MAX) DC
• Current consumption : At 3V less than 0.6mA; At 12 V less than1.3mA
• Output connector : Pig-tail: cable direct out; hot ( signal )white, +DC voltage in: black, shield: ground
• Weight : 45g (microphone), 55g(Phantom I/F Part)
• Dimensions : Microphone; Ø32.5mm, H14mm
• Cable length : 3000 mm
• Material : Metal mesh, Woven wire cloth; Base, Copper
• Finish : Fired Painted

Our Part #  CUB-01PTBE