Joe Meek oneQ

The Joemeek oneQ is the most full-featured, technologically advanced studio channel we've ever made!

A single channel combining Mic Pre (with Burr-Brown IC), four band EQ (the most flexible of any Joemeek ever), our "signature" optical compressor, De-Esser, and Enhancer, it's a master channel like no other. Housed in a 2u chassis, the elegantly sculpted faceplate is intelligently laid out, with clear, easy to read legends and a large analog VU meter. We even included 24bit, 96K A/D converters with word clock input and output.

The new oneQ raises the bar for all studio master channels!

Specifications:

• Input Impedances: Mic: 1.2kohm; Line: 20kohm
• Pre-amp Overall Gain: 10dB to 60dB (variable)
• Common Mode Rejection: 70dB
• Equivalent Input Noise: -128.5dBu (unweighted)
• Distortion: 0.001% (below Compressor threshold)
• Frequency Response: 15Hz to 70kHz (-3dB)
• Maximum Input before Clipping: Mic: +21dBu; Line:+45dBu
• Headroom before Clipping: +21dBu
• Compressor Threshold: -6dBu to +22dBu(variable)
• Compressor Ratio: 1:1 to 10:1 (variable)
• Compressor Attack Time: 1 msec to 100 msec (adaptive)
• Compressor Release Time: 0.1 sec to 3 sec (adaptive)
• Nominal Output Levels: +4dBu/-10dBv
• Output Impedance: 100ohm
• Output Level Switch: 12dB attenuation
• Noise Floor: -85dBu (typical, with ~40dB mic gain)
• VU Meter: Analogue movement
• Power Supply: 115V / 230V ac mains, 50/60Hz
• Power Consumption: 30W
• Dimensions (W x H x D): 482 x 88 x 220 mm
• Weight: 3 kg
• High Pass Filter: 12dB per octave cut below 80Hz
• EQ Boost & Cut: +/-15dB (zero phase-shift bellresponse)
• LF Frequency : 80Hz/120Hz switchable
• LMF Frequency : 200Hz to 2kHz variable
• HMF Frequency : 1kHz to 6kHz variable
• HF Frequency : 7kHz/14kHz (selectable)
• EQ "Q" 0.9 (1.6 octaves)