E-MU Systems PM5-EMU

E-MU's new PM5 Precision Monitor has been designed from the ground up to deliver hyper-accurate audio in a compact design. From its custom audiophile amplifiers (Class-A input and MOSFET output stages) to its world-class drivers and premium cabinet, the PM5 offers superior imaging and hi-end transient detail with linear frequency response rivaling compact nearfield monitors over twice the price. Professional features like overload protection, balanced/unbalanced inputs, and treble, bass and input sensitivity controls ensure that the PM5 will seamlessly integrate into any studio environment.

Features

• Radiused edges reduce cabinet edge diffraction to provide superior imaging
• Premium neodymium soft dome high-frequency driver delivers unsurpassed high frequency performance
• Dual-mode LED shows power status and indicates when overload protection circuitry engages to prevent damage to drivers
• Premium glass fiber low-frequency driver delivers oustanding linear response
• Solid cabinet design features one inch thick front baffle to eliminate internal resonance
• Flow-optimized port provides low distortion and articulate bass
• Custom 40W/40W bi-amplified power section (with discrete Class-A input stage, MOSFET output stages and active crossover) has been carefully tuned to minimize aural fatigue and maximize audio precision
• Balanced Neutrik (XLR and 1/4") and unbalanced RCA inputs provide connections to all your studio equipment
• Treble, Bass and Input Sensitivity controls allow you to calibrate the PM5 to your specific acoustic environment and set input levels
• Magnetic shielding prevents interference with other electronics in your studio like computer monitors, etc.

General Specifications

• Type: Two-way, bi-amplified nearfield reference monitor
• Frequency Response: 67Hz to 20kHz (±2.5dB)
• Maximum Sound Pressure Level (short term): Single: =100dB SPL @ 1m; Pair: =103dB SPL @ 1m
• High-Frequency Driver: Type: Neodymium Soft Dome; Size: 25.4mm (1”)
• Low-Frequency Driver: Type: Glass Fiber Cone; Size: 127mm (5”)
• Dimensions (H x W x D): 11.5” x 6.9” x 9.7”
• Weight: 14.3 lbs

Crossover Network

• Type: Active 2nd- order Butterworth
• Input sensitivity control range: -21dB - 0dB
• Input impedance: Balanced: 47K ohms; Unbalanced: 47K ohms
• Crossover frequency: 2.5kHz

High-Frequency Amplifier

• Power: 40W RMS into 4 ohms
• Signal-to-Noise Ratio, referred to full output: > 98dB
• Distortion: THD < 0.2%

Low-Frequency Amplifier

• Power: 40W RMS into 4 ohms
• Signal-to-Noise Ratio, referred to full output: > 98dB
• Distortion: THD < 0.2%