Line 6 DR-DISTORTO

If you like singing lead tones with massive sustain, Dr. Distorto™ is for you. This pedal has classic, full-bodied distortion tones with the ability to achieve incredible sustain at any distortion level using an innovative harmonic feedback circuit. No matter what your distortion setting, you’ll get feedback perfection every time with Dr. Distorto.

Feedback / Sustainer Controls:

• FDBK - The feedback switch is used to configure Dr. Distorto's uniqueharmonic sustainer circuit.
      * Off - This disables thefeedback portion of the pedal, leaving Rise, Fall and Blend non-functional.This setting is great for using Dr. Distorto as a distortion boxonly.
      * Sustain - Provides a sustained tone that will bein unison with any single note played.
      * Octave - Provides a sustained tonethat is one octave above any single note played.
• Rise - Adjusts the amount of time it takes thefeedbacker to begin sustaining a tone.
• Fall - Adjusts the amount time it takes thefeedbacker to stop sustaining a tone.
• Blend - Adjusts the volume of the feedbacker's sustained tone.

Distortion Controls:

• Level - The Level knob controls the output level ofthe pedal. It does not affect the pedal's tone or FX section in any other way.
• Drive - The Drive knob dials in the amount ofdistortion created by the pedal. Use this with the tone knob to dial in theperfect overdriven tone.
• Tone - The Tone knob allows you to smoothly morphfrom a fuzz distortion tone to a classic drive tone using only one dial.
• Gate - The Gate switch is used to reduce signal noise, hum, and hiss whenyou are not playing.
      * Off - Disables the gate functioncompletely.
      * Mild - A soft gate, when minimal noiseattenuation is needed. The gate’s threshold is linked to the Drive knob forbest results at any setting.
      * Clamp - A hard, clampinggate with a quick response to cut out all noise between notes. The gate'sthreshold is linked to the Drive knob for best results at any setting.

TMGR# DR-DISTORTO