Product Overview
RedNet A16R is a 1U, 16x16 analogue line-level I/O interface for any Dante™ audio-over-IP network. Featuring network and power supply redundancy, RedNet A16R is the ideal choice for providing analogue I/O in many critical-path applications, whether in Post Production, Broadcast, Live Sound or the Recording Studio.
High-quality conversion with up to 119dB of dynamic range is provided through four rear-panel DB25 connectors while an additional pair of AES3 I/O is provided through male and female XLR for added flexibility. Word Clock I/O on BNC connectors allows external devices to clock to RedNet A16R, or alternatively allows A16R to act as a network Primary clock to external input. Power is supplied through a pair of locking IEC power inlets, and network connections are provided with a pair of locking Neutrik etherCON connectors; providing redundant operation or daisy-chained operation.
Features
- 16 channels of high-quality line-level analogue I/O for Dante audio-over-IP networks
- 24-bit precision conversion up to 192kHz
- 119dB dynamic range, flat from 20Hz – 20kHz, +/-0.15dB
- Software-selectable +24dBu or +18dBu level alignment
- AES67 compliant
- Dual power supplies and network connections with full power and network redundancy including locking connectors for maximum reliability
- Word Clock I/O and DARS input for increased flexibility plus an additional two channels of AES3 I/O
- Analogue I/O to AES59 standard on DB25 connectors
- Comprehensive front-panel metering and indicators
- Remote monitoring software with powerful graphic user interface
- Brainworx bx_console Focusrite – exclusive plug-in that faithfully captures the sound, feel and styling of the original Focusrite ISA 110 Equaliser and ISA 130 Dynamics Modules.
Specifications
- LINE INPUTS
- 0 DBFS Reference Levels: +18 or 24dBu (switchable)
- Frequency Response: 20Hz – 20kHz ± 0.1dB
- THD N:
- EIN: -96dBu A-Weighted (typical)
- Signal-To-Noise Ratio: 120dB A-Weighted (typical)
- Converter Dynamic Range: 120dB A-Weighted (typical), 10Hz – 20kHz
- LINE OUTPUTS
- 0 DBFS Reference Levels Outputs: 18 or 24dBu (switchable)
- Frequency Response Outputs: 20Hz – 20kHz ± 0.1dB
- THD N Outputs:
- Noise In Presence Of Signal: -94dBu A-Weighted (typical)
- Dynamic Range: 118 dB A-Weighted (typical)
- Converter Dynamic Range Output: 120dB A-Weighted (typical), 10Hz – 20kHz
- CROSSTALK
- Input To Output Or Input
- Output To Input Or Output
- DIGITAL INPUT SAMPLE RATE CONVERTERS
- Sample Rate Range: 32kHz to 216kHz
- Gain Error: -0.3dB
- Dynamic Range Inputs: >138dB
- THD N Inputs
- Latency: 11 to 45 samples (network and sample rate dependent)
- DIGITAL PERFORMANCE
- Supported Sample Rates: 44.1 / 48 / 88.2 / 96 / 176.4 / 192 kHz (-4 / -0.1 / 0.1 / 4.167) at 24 bit
- Clock Sources: Internal or from Dante Network Master
- External Word Clock Range: Nominal sample rate ±7.5
- REAR PANEL CONNECTIVITY
- Line Inputs: 2 x DB-25 connectors
- Line Outputs: 2 x DB-25 connectors
- Channel Count: 2 x 2 AES/EBU channels
- Input (Optional DARS): 1 x Female XLR (Switchable with analogue input channels 15 and 16 at quad rates)
- Output: 1 x Male XLR (Duplicate of analogue output channels 15 and 16 at quad rates)
- Word Clock Input: 1 x BNC 75O port (switchable termination)
- Word Clock Output: 1 x BNC 75O port
- PSU: 2 x IEC Inputs with retaining clips.
- Network: 2 x etherCON NE8FBH, also compatible with standard RJ45 connectors
- FRONT PANEL INDICATORS
- Primary PSU (A): Green LED. Illuminates when an AC input is applied and all DC outputs are present
- Secondary PSU (B): Green LED. Illuminates when an AC input is applied and all DC outputs are present
- Primary Network: Green LED. Indicates that a network connection is present on primary port when in redundant mode
- Secondary Network: Green LED. Indicates that a network connection is present on secondary port when in redundant mode
- Network Locked: Green LED. When unit is network secondary, shows valid network lock
- Sample Rate: Orange LED for each: 44.1 kHz, 48 kHz, x2, x4
- Pull Up/Down: Orange LED. Indicates that the unit is set to operate on a Dante pull up/down domain
- AES/EBU Signal Indicators: 2 I/O signal indicator LEDs
- Clock Source: Orange LED for each
- NETWORK MODES
- Redundant: Allows unit to connect to two independent networks
- Switched: Connects both ports to integrated network switch allowing daisy-chaining