Product Overview
20 AWG stranded (26x34) high-conductivity tinned copper conductors, EPDM rubber insulation, rayon braid, tinned copper braid shield (85% coverage), cotton wrap, EPDM jacket.
Specifications
- Conductors: 2
- AWG: 20
- Stranding: 26 x 34
- Conductor Diameter: 0.37"
- Conductor Material: High Conductivity TC - TinnedCopper
- Insulation Material: EPDM - Ethylene Propylene DieneMonomer Rubber
- Nom. Insulation Wall Thickness: 0.23"
- Insulation Diameter: 0.83"
- Overall Cabling Separator Material: Rayon Braid
- Outer Shield Type: Braid
- Outer Shield % Coverage: 85%
- Outer Shield Separator Material: Cotton Wrap
- Outer Jacket Material: EPDM - Ethylene PropyleneDiene Monomer Rubber
- Outer Jacket Nominal Wall Thickness: 0.35"
- Overall Nominal Diameter: 0.262"
- Operating Temperature Range: -50º to 90º C
- Non-UL Temperature: 90º C
- Bulk Cable Weight: 42.8 lbs. (1000 ft.)
- Max. Recommended Pulling Tension: 100 lbs.
- Min. Bend Radius (Install): 2.75"
- Nom. Characteristic Impedance: 52 ohm
- Nom. Inductance: 0.18 microH/ft
- Nom. Capacitance Conductor to Conductor @ 1 kHz: 30pF/ft
- Nom. Cap. Cond. to Other Cond. & Shield @ 1 kHz:55 pF/ft
- Nom. Conductor DC Resistance @ 20º C: 10.2 ohm / 1000ft.
- Nom. Outer Shield DC Resistance @ 20º C: 3.06 ohm /1000 ft.
- Max. Operating Voltage - Non-UL: 600 V RMS
- Max. Recommended Current: 4 Amps per conductor @ 25º C
Note
- For further specifications on this product, please refer to the attached Datasheet under the "Documentation" Tab.