DPA 4018V-B-SE2 4018V Softboost Supercardioid Mic with SE2-ew Adapter in Black

Especially designed and built for vocal onstage performances from DPA Microphones, a supercardioid capsule that is engineered to reproduce every nuance of the human voice in a transparent, consistent, and thrilling fashion. The handheld microphones' supercardioid mic head can be used with various pro mic wireless systems, employing original DPA adapters (additional adapters sold separately). This particular model [4018V-B-SE2] features a pre-programmed high-end 3 dB soft boost at 12 kHz for added high-end emphasis, and comes with the SE2-ew adapter which ensures perfect mechanical fit and electronic optimization for Sennheiser -2000/9000/evolution/DI- wireless handheld bodies (components sold separately). With unsurpassed capsule quality, 3-stage pop protection grid, matched shock mounting, and electronics handling high voltage from the capsule; the sound's extremely dynamic and distinct. Additionally, you'll want to note that it doesn't necessarily have to be used as a wireless mic, since the adapter can be replaced with the DPA Handle (sold separately).

The flexibility of its adapter system gives the user simple and very affordable possibilities of choosing either a wired DPA handle or the professional wireless system of their choosing, with no loss in the sound quality.

DPA 4018V-B-SE2 Includes:

• (1) DPA 4018V Mic Capsule
• (1) SL1 Wireless mic adapter for Sennheiser -2000/9000/evolution/DI-
• (1) Foam windshield
• (1) Grid
• (1) Mic clip

DPA 4018V-B-SE2 Features:

• Extraordinarily natural sound
• High separation
• Extreme SPL handling: 160 dB
• Superb definition
• Low handling noise
• Sleek design
• Flexible adapter system fits most professional wireless systems
  • Provides seamless integration with Sennheiser -2000/9000/evolution/DI-

DPA 4018V-B-SE2 Specifications:

• Manufacturer code: 4018V-B-SE2
• Directional pattern: Supercardioid
• Principle of operation: Pressure gradient
• Cartridge type: Pre-polarized condenser
• Frequency range: 20 Hz - 20 kHz, permanent third order high pass filter at 80 Hz
• Frequency range, ±2 dB, at 4.7" (12cm): 100 Hz - 16 kHz with 3 dB soft boost at 12 kHz
• Sensitivity, nominal, ±2 dB at 1 kHz: 5 mV/Pa; -46 dB re. 1 V/Pa
• Equivalent noise level, A-weighted: Typ. 19 dB(A) re. 20 µPa (max. 21 dB(A))
• S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL): Typ. 75 dB(A)
• Total harmonic distortion (THD): < 1% up to 139 dB SPL peak
• Dynamic range: Typ. 120 dB
• Max. SPL, peak before clipping: 160 dB
• Output impedance: 100 Ω
• Minimum load impedance: 1 kΩ
• Cable drive capability: 328ft (100m)
• Output balance principle: Impedance balancing with Active Drive
• Common mode rejection ratio (CMRR): > 50 dB at 1 kHz
• Power supply (for full performance): 48 V Phantom power (± 4 V)
• Current consumption: Max. 2 mA
• Connector: XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase
• Color: Matte black
• Weight: 10.9 oz. (309 g)
• Microphone diameter: 2.05" (52mm)
• Capsule diameter: 0.75" (19mm)
• Microphone length: 8.1" (205mm)
• Maximum output voltage, RMS: 8 V
• Polarity: +V at pin 2 for positive sound pressure
• Temperature range: -40° F to 113° F (-40° C to 45° C)
• Relative humidity (RH): Up to 90%