Product Overview
This member of the AMX Solecis SDX family of small digital AV switchers is the SDX-514M-DX. This 5x1 4K Multi-Format Solecis is a 4K and Ultra High Definition (UHD) capable solution that provides five user connection points and includes simplified local control which routes the selected signal to both a DXLink and HDMI output. This provides a low cost solution that combines a DXLink Transmitter and digital switcher into a single small form factor device that is commonly used at a table.
Solecis Digital Switchers are ideal for use in huddle spaces or small classrooms to provide simple switching for multiple sources. In larger rooms with multiple work spaces, a Solecis at each table or desk allows users to share content with the work group or the entire room. In even larger integrated environments Solecis digital switchers can provide easy to use source point switching and distance transmission over DXLink to an Enova DVX or DGX for hub-style building or campus-wide distribution.
AMX Solecis SDX-514M-DX Features:
- 4K and Ultra High Definition (UHD) Support – Experience high-quality video resolution for 4K devices
- Multiple Video, Audio and Ethernet Connections – All the connections you need at the conference table including audio, video, control and network access
- Switch Inputs Without the Need for a Central Controller – Provides low cost solution for huddle spaces and classrooms
- Works with HydraPort Single Button or Keypad Modules – Provides an elegant installation in a table or lectern
- Built-in Support for AxLink Keypads – Forwards keypad commands to a central controller over Ethernet eliminating the need for a separate AxLink cable run
AMX Solecis SDX-514M-DX Specifications:
- Part #: FG1010-355
- Dimensions (H x W x D): 1 11/16" x 10" x 7" (42.16 mmx 253.8 mm x 177.8 mm)
- Weight: 3.5 lbs (1.6 kg)
- Signal Transport - DXLink:
- Connector: (1) RJ-45
- Supported Signal Styles: Digital video, audio, Ethernet, bi-directional control and power
- Transport Layer Throughput (Max): 10.2 Gbps
- Twisted Pair Cable Type:
- Shielded Cat6, Cat6A and Cat7
- DXLink twisted pair cable runs for DXLink equipment shall only be run within a common building where a common building is defined as: the walls of the structure(s) are physically connected and the structure(s) share a single ground reference
- Twisted Pair Cable Length:
- Up to 229.66 ft (70 m) with 4K video
- Up to 328 ft (100 m) with 1080p video
- HDCP Support: Yes
- Active Power Requirement:
- Voltage, AC (Typical): 110-240 VAC, 47-63 Hz
- Power Consumption (Max): 48 W
- Power Connector: IEC Power Cord Connector 100-240 VAC 47-63 Hz
- DXLink Power: Supplies power to a DXLink Twisted Pair RX, when used in point-to-point applications
- Power Supply:
- Environmental:
- Temperature (Operating): 32° F to 104° F (0° C to 40° C)
- Temperature (Storage): -22° F to 158° F (-30° C to 70°C)
- Humidity (Operating): 5% to 85% RH (non-condensing)
- Humidity (Storage): 0% to 90% RH (non-condensing)
- USB (HID)Keyboard & Mouse:
- USB (HID): (1) USB Type B Connector (“TO HOST”); connect a Solecis SDX-510M-DX Digital Switcher with DXLink to a PC and emulate keyboard and mouse commands from a DXLink Receiver
- Front Connectors:
- ID Pushbutton: (1) ID Pushbutton, can be used to assign the unit’s Device ID, switch between Static and Dynamic IP addressing modes, and reset the unit to factory defaults
- AxLink Keypad Control: (1) 4-pin, 3.5 mm Screw Terminal Connector
- Ethernet LAN OUT Port: (3) RJ-45
- HDMI Output: (1) HDMI Type A Female Connector
- DXLink Output: (1) RJ-45
- USB Host Port: (1) USB Type B Connector “TO HOST”
- USB Device Port: (1) USB Type A Connector, reserved for future use
- Back Connectors:
- Advanced Configuration Interface: (1) USB Mini-B Connector
- HDMI Input: (3) HDMI Type A Female Connectors
- VGA Inputs: (2) HD-15 Connectors
- Single External Button/LED Control Connector: (1) 3-pin 3.5mm Screw Terminal Connector
- Dual External Button/LED Control Connector: (2) 5-pin 3.5mm Screw Terminal Connector
- Analog Stereo Inputs: (2) 1/8" mini-Stereo Jack
- AC Power Connection: IEC Power Cord Connector
- Ethernet:
- Ethernet Connections: (3) RJ-45, 10/100 Port provides TCP/IP communication. This is an Auto MDI/MDI-X enabled port, which allows you to use either straight-through or crossover Ethernet cables.
- The Ethernet Port LEDs show communication activity, connection status, speeds, and mode information
- Ethernet Link/Act Indicator: (1) Link/Activity LED (green) blinks when receiving Ethernet data packets, one on Ethernet RJ-45 connector and one on the front panel
- Ethernet Speed Indicator: (1) Speed LED (yellow) lights On when the connection speed is 100 Mbps Ethernet connection and turns OFF when the speed is 10 Mbps
- Control & Indicators:
- AxLink Keypad Port: (1), 4-pin 3.5 mm captive-wire connector, provides data and power to up to 2 external AxLink Keypads
- AxLink Indicator: (1) AxLink Keypad LED (green) indicates the state of the AxLink Keypad port
- LINK/ACT Indicator: (1) LED (green), lights when the Ethernet cable is connected and an active link is established. This LED also blinks when receiving
- Ethernet data packets:
- Status Indicator: (1) LED (green), indicates boot and connection status
- Power Indicator: (1) Power LED (green) indicates the unit is powered on
- ID Pushbutton: (1) ID Pushbutton, can be used to assign the unit’s Device ID, switch between Static and Dynamic IP addressing modes, and reset the unit to factory defaults
- Integrated Switcher:
- Video Switching: 5x1 (dual) audio/video switching, any of 5 inputs can be routed to the HDMI and DXLink output simultaneously
- Video Inputs:
- (2) HD15; supports RGBHV
- (3) HDMI; supports HDMI/HDCP
- Video Outputs:
- (1) HDMI; supports HDMI/HDCP
- (1) DXLink; supports digital video, audio, Ethernet, bi-directional control and power
- HDCP Support: Yes
- HDMI:
- Compatible Formats: HDMI, HDCP , DVI
- Input Signal Type Support:
- HDMI
- DVI-D (Single Link With Cable Adapter)
- DisplayPort ++ (Input Only, With HDMI Cable Adapter)
- Input Connectors: (3) HDMI Type A Female
- Output Signal Type Support: HDMI, HDCP, DVI
- Input Re-clocking (CDR): Yes
- Deep Color Support: Yes
- Color Space Support:
- RGB 4:4:4
- YCbCr 4:4:4 and 4:2:2 (Input signal support for YCbCr 4:4:4 and 4:2:2, output color-space is converted to RGB 4:4:4)
- 3D Format Support:
- HDMI Primary Formats
- Frame Packing 1080p up to 24Hz
- Frame Packing 720p up to 50/60Hz
- Frame Packing 1080i up to 50/60Hz
- Top-Bottom 1080p up to 24Hz
- Top-Bottom 720p up to 50/60Hz
- Side-by-Side Half 1080p up to 50/60Hz
- 3D supported when the HDMI DXLink RX Scaler is in Bypass mode and format is 1080p60 or less
- 4K Resolution Support:
- 3840 x 2160p @ 24/25/30 Hz
- 4096 x 2160p @ 24/25/30 Hz
- 3840 x 2160p @ 60 Hz, 4:2:0*
- 4096 x 2160p @ 60 Hz, 4:2:0*
- Audio Format Support:
- Dolby TrueHD, Dolby Digital, DTS-HD Master Audio, DTS, 2 CH through 8 CH L-PCM
- Dolby Digital and DTS support up to 48kHz, 5.1 channels
- Audio Resolution: 16 bit to 24 bit
- Audio Sample Rate: 32 kHz, 44.1 kHz, 48 kHz, 96 kHz,192kHz
- HDCP Support:
- Yes
- Supports AMX HDCP InstaGate Pro Technology
- When used with an AMX Digital Media Switcher the key support is up to 16 sinks per output, independent of source device
- When used as a single point-to-point solution the key support is defined by the source device
- Analog Video:
- Compatible Formats: RGBHV
- Input Connector: HD-15
- Resolution Support: up to 1920x1200 @60 Hz Reduce Blanking
- Auto-Adjust Input: Supported
- Digital Processing: 24-bit, 165 MHz
- Stereo Audio:
- Input Signal Types: Stereo Analog
- Input Connectors: 2 - 1/8" Mini-Stereo Jack
- Analog Input Level (Max): +2 dBu, unbalanced
- Analog to Digital Conversion: 48 kHz Sample Rate, 24-bit
- Analog to Digital Reference Level: +2.5 dBu = 0 dBfs
- General:
- Regulatory Compliance:
- RoHS
- FCC Class A
- CE
- UL-Listed
- CSA Approved
- IEC60950
- UL94-V0 Flammability Rating
- Mounting Options:
- Compatible with the following V Style mounting options:
- AVB-VSTYLE-SURFACE-MNT, V Style Module Surface Mount (FG1010-722)
- NMX-VRK, V Style Rack Mounting Shelf (FG3201-60)
- AVB-VSTYLE-POLE-MNT, V Style Module Pole Mount (FG1010-723)
- Compatible AMX Enova DVX / DGX and DXLink Products:
- Enova DGX 800/1600/3200/6400 Digital Media Switchers with DGX-I-DXL-4K DGX DXLink Twisted Pair 4K Input Board installed
- DX-RX-4K, DXLink 4K HDMI Receiver Module as a point-to-point solution
Note:
Actual product may vary in appearance and specification. For more information on this and other products, please contact your Sales Pro.
* Supported by DX-RX-4K when in Bypass Scaling mode
For passage of 4K signal content, 4K products must be used. Solecis 4K Digital Switchers are also compatible with DXLink Twisted Pair (non-4K) equipment and Enova DVX-3255HD, DVX-3155HD, DVX-3256HD, DVX-3156HD, DVX-2255HD and 2155HD All-In-One Presentation Switchers. Conditions may apply, please reference hardware reference manuals or contact technical support for details
