Product Overview
An exciting variation of the hugely popular RUSH PAR 2 RGBW Zoom (sold separately), Martin Professional's RUSH MH 6 Wash uses the same LED engine and zoom system, but adds moving head capability. The RUSH MH 6 Wash includes a fully pre-mixed color system from 12x 10 W RGBW LEDs and a spectacular 10° – 60° zoom. Additionally, it offers full electronic dimming, strobe effects, and temperature-controlled fan cooling for quiet operation.
Martin's M-Touch is a powerful yet simple control surface for the Martin M-Series controllers, the most affordable professional lighting solutions on the market. Fully compatible with all M-Series consoles and M-PC software, Martin M-Touch is a plug-and-play solution with an innovative control surface like no other lighting console. 14 FSR faders allow control of playbacks and fixture parameters while 20 velocity-controlled pads allow for new types of effects. Additional programming buttons such as Record, Edit, Update, Load, and Clear are accessible directly from the M-Touch control panel. Martin M-Touch comes with one DMX 512 Universe for direct control of any compatible DMX device.
DMX 5pM-5pF 25ft - Cable Up's Industrial line features a combination of high-performance, rugged quality cable. The connectors are fitted with an internal strain relief and have oxygen free copper Sunrise conductors. The shielding is braided oxygen free copper for maximum EMI/RFI rejection.
All Cable Up® Industrial cables are covered by a 1-year unconditional warranty against defects in material or workmanship.
Martin Professional Moving Light Package Includes:
- Martin Professional RUSH MH 6 Wash Light
- RUSH MH 6 Wash Light Fixture
- Included Items Power cable 1.5 m
- Omega bracket for rigging clamp attachment
Martin Professional Moving Light Package Features:
- Martin Professional RUSH MH 6 Wash Light
- 12x 10W Osram Ostar RGBW LEDs
- Single-lens wash with fully premixed color
- 2,000 lumen output
- 10° – 60° zoom
- 32 pre-built color macros
- Temperature-controlled cooling system
- Digital display menu
- PowerCON® in and through
- 3- and 5-pin DMX options
- Martin Professional M-TOUCH DMX Control Surface
- Truly affordable console surface for both smaller applications and professional use
- Rugged aluminum design for durability
- The most powerful controller of its class with a full 512 DMX channels, expandable to 65,000 channels
Martin Professional Moving Light Package Specifications:
- Martin Professional RUSH MH 6 Wash Light
- Physical:
- Dimensions (LxWxH): 11.4" x 7.4" x 14.2" (290 x 189 x 360 mm)
- Weight: 15.7 lbs (7.1 kg)
- Dynamic Effects:
- Color mixing: RGBW
- Color presets: 36 color presets plus full white, 'color wheel' effects
- Electronic dimming: 0 - 100%, 4 dimming curve options
- Strobe and pulse effects: Variable speed and action, random strobe
- Electronic 'shutter' effect: Instant open and blackout
- Zoom: Motorized Pan: 540°, Tilt: 270°
- Control and Programming:
- Control options: DMX
- DMX channels: 14
- White balance control: RGB adjustment
- 16-bit fine control: Dimming, pan, and tilt
- DMX address setting: Control panel with LCD display
- DMX compliance: USITT DMX512/1990
- Optics:
- Light source: 12 x 10 W RGBW Osram Ostar LEDs
- Minimum LED lifetime: 50,000 hours (to >70% luminous output)*
- *Note: Figure obtained under manufacturer's test conditions
- Zoom range: 10° - 60°
- Construction:
- Color: Black
- Housing: High-impact flame-retardant thermoplastic
- Ingress protection rating: IP20
- Installation:
- Mounting points: One quarter-turn bracket for rigging clamp
- Location: Indoor use only, must be fastened to surface or structure
- Orientation: Any
- Minimum distance to illuminated surfaces: 8" (200mm)
- Minimum distance to combustible materials: 4" (100mm)
- Minimum clearance around fans and vents: 4" (100mm)
- Connections:
- AC power in/thru: Neutrik PowerCON
- DMX data in/thru: 3-pin and 5-pin locking XLR
- Electrical:
- AC power: 100-240 V nominal, 50/60 Hz
- Power supply unit: Auto-ranging electronic switch mode
- Fuse: T 3.15 A
- Recommended Miniature Circuit Breaker*: Type D
- Note: *Per IEC 60898/UL489/CSA C22.2 No. 5
- Power consumption figures are typical, not maximum. Allow for +/-10% variation
- Typical Power and Current:
- 120 V, 60 Hz: 1.6 A, 155 W, PF 0.99
- 230 V, 50 Hz: 0.7 A, 155 W, PF 0.95
- Typical half-cycle RMS inrush current at 240 VAC: 11.3 A
- Measurements made at nominal voltage with all LEDs at full intensity. Allow for a deviation of +/- 10%
- Thermal:
- Cooling: Forced air (temperature-regulated, low noise)
- Maximum ambient temperature (Ta max.): 40°C (104°F)
- Minimum ambient temperature (Ta min.): 0°C (32°F)
- Approvals:
- EU safety: EN 60598-2-17 (EN605989-1), EN 62471, EN 62493
- EU EMC: EN 55015, EN 55032, EN 55103-2, EN 61000-3-2, EN 61000-3-3, EN 61547
- US safety: UL 1573
- US EMC: FCC Part 15
- Canadian safety: CSA C22.2 No. 166
- Australia/NZ: C-TICK N4241
- Other: CE / ETL C US Intertek / C-Tick
- Martin Professional M-TOUCH DMX Control Surface
- Physical:
- Dimensions (LxWxH): 15.5" x 8.6" x 1.8" (394 x 218.5 x 46.5 mm)
- Weight: 3.3 lbs (1.5 kg)
- Control / User Interface:
- Bank Navigation Up/Down with numerical display
- Main Go section: Snap, Release, Pause, and Go buttons
- Command Buttons: Record, Edit, Update, Load, Clear
- Multifunction Mode Select button:
- Fixture Selection buttons: Last, Next, Highlight
- 4 x Parameter Select buttons
- 4 x Parameter Adjust touch faders
- 10 x Function velocity pads
- Playback: 10 x Playback touch faders with 3 buttons (2x touch pad, 1 x velocity pad)
- System integration: Unlocks 1 x DMX universe when connected to M-PC™
- Connections:
- DMX data link: 1 x 5-pin locking XLR
- Windows PC: 1 x USB 2.0
- Electrical:
- Power source: 5 VDC over USB
- Maximum current: 500 mA
- Thermal: Operating temperature: 32° – 122°F (0° –50°C)
- Construction:
- Housing: Aluminum, steel, plastic
- Mounting: VESA 75x75, 100x100
- Security: K-Lock locking slot
- IP Rating: IP20
- Included Items: 4.9 ft (1.5m) USB cable
Note: