Product Overview
Delivering no-compromise performance —on any stage— the Sennheiser EM6000 DANTE™ 2-Channel digital receiver is a member of Sennheiser's Digital 6000 Series. With its large 244MHz switching bandwidth, it's able to seek out and find reliable transmission paths in absolutely any situation. Its renowned Long-Range (LR) mode (as with the masterpiece 9000, sold separately) ensures superior audio signal quality, even in the most demanding of high-frequency environments. Error correction and audio error masking recognize and fix problems long before they're even audible, guaranteeing a reliable connection where other systems may fail.
It features maximum overview, quick setup, and shortcuts to important functions. The concept for the user interface on contrast-rich, white OLED displays comes from practical experience: at a glance, all vital parameters are summarized, and important functions are reached directly through home screens, with no lengthy navigation paths. The unit's auto-setup enables scanning and frequency distribution to all connected devices directly via the receiver. Of course, it can be monitored and configured using Wireless System Manager (WSM) software.
The unit integrates seamlessly with existing digital or analog infrastructures; it includes a digital AES output with word clock I/O, high-quality analog, transformer-balanced XLR and 6.3mm TRS outputs, as well as a 6.3mm headphone output, plus an Audinate Brooklyn II card offers 2 additional amphenol RJ-45 connectors for integrating the receiver into a DANTE network.
Includes
- EM 6000 Dante Digital Receiver
- Mains cable
- (2) Antennas
- (2) BNC Antenna Cables (50 Ω) for Daisy-Chaining
- (2) Rubber Feet
Features
- 19" 2-Channel receiver, 19 inch 1RU
- Large 244 MHz switching bandwidth
- Legendary Long Range mode (LR) with proprietary audio codec (SeDAC) from the masterpiece Digital 9000
- Link Density Mode (LD mode) with efficiency-optimized Audio Codec (SePAC) ensures up to 5 channels per MHz bandwidth
- Equidistant frequency grid for maximum channel density and simplest setup
- 32 superior quality RF pre-selection filters for optimal suppression of interference signals at antenna input
- Error correction and audio error masking
- AES-256 encryption
- Automatic frequency setup
- Digital and transformer balanced analog outputs XLR, 6.3 mm jack, AES-3, EM 6000 Dante with Brooklyn II Card and Amphenol RJ-45
- Integrated antenna splitter for cascading of up to 8 systems
- One high-quality OLED display per channel
- Link Quality Indicator (LQI)
- Wireless Systems Manager (WSM) compatible
- Compatible with standard Sennheiser UHF antennas
- Compatible with Digital 9000 transmitters in Long Range mode
Specifications
- Audio output
- Dante™, RJ-45: 48 kHz, 96 kHz, 24 bit
- Digital Audio outputs: AES3-2003, XLR-3: 48 kHz, 96 kHz, 24 bit
- Dante™, RJ-45: 48 kHz, 96 kHz, 24 bit
- Can be externally synchronized using WCLK loop-through with BNC sockets
- Analog Audio Outputs: XLR-3 and 6.3 mm jack per channel (transformer balanced)
- -10 dBu to +18 dBu in steps of 1 dB (2 kΩ)
- Dimensions: 44 x 483 x 373 mm
- Frequency response: 30 Hz - 20 kHz (1.5 dB)
- THD, total harmonic distortion: < 0.03 % (@ 1 kHz)
- Weight: Approx. 5.2 kg
- Power consumption: Max. 35 W
- Storage temperature: -25°C to +70°C
- Operating temperature: -10°C to +50°C
- Switching bandwidth: 244 MHz
- Power supply: 100 - 240 V AC, 50/60 Hz
- Antenna connector: Input 2x BNC (50 Ω), 12 V DC, max. 200 mA each via antenna sockets, short circuit proof, Output 2 x BNC (50 Ω)
- Codecs: SePAC (Sennheiser Performance Audio Codec)
- Dynamic range: 111 dB (A) type
- Frequency range: 470 - 714 MHz
- Headphone output level: 6.3 mm jack, 2x 100 mW at 32 Ω
- Image rejection: > 100 dB typ.
- Sensitivity: -100 dBm typ.
- Word clock
- Input: BNC, 75 Ω
- Output: BNC, 75 Ω
- Sampling Rates: 48 kHz, 96 kHz
- Operating relative humidity
- Operation: Max. 85% at 40°C (non-condensing)
- Storage: Max. 90% at 40°C (non-condensing)
- Transmission method: Digital modulation, “LR” mode Min. frequency spacing for equidistant grid: 325 kHz
- Latency
- Analog Audio Out: 3 ms
- Digital Audio Out: 3 ms (AES/EBU)
- Audio codec: SeDAC (Sennheiser Digital Audio Codec)
- Network protocol: IEEE 802.3-2002 (10/100 Mbit/s), shielded RJ-45 connection
- Receiver Principle: Double superheterodyne
- Diversity principle: True bit diversity
- Encryption: AES 256
- Daisy chain outputs: 2x BNC (50 Ω) 0 dB +/- 0.5 dB amplification relative to antenna inputs
- Receiving channels: 2
- Daisy-chained receivers (RF): Max. 8 EM 6000 units
- Power plug: 3-pin, protection class I as per IEC/EN 60320-1
- Water Protection Code: The product must not be exposed to dripping and splashing (IP2X)
- Dante™: IEEE 802.3 (1000 Mbit/s), shielded RJ-45 connection
