ETC UFMP4 4 Zone Mini Relay Panel

OUR PART #: UFMP4 MFR #: 7179A1027

Copied to clipboard

ETC's UFMP4 is a 4-zone DMX Foundry Mini Panel with four relays and four 0-10V dimming outputs. ...Read more

ETC UFMP4 4 Zone Mini Relay Panel Image 1
ETC UFMP4 4 Zone Mini Relay Panel
Our Price: $660.00
List Price: $825.00
You save 20%!

SPECIAL FINANCING AVAILABLE

Synchrony Music & Sound Card
$19/mo* with 36 month financing. ‡
Limited Time. Learn How

Questions? Contact our
Sales and Service Pros for expert
advice and package pricing.

800-356-5844

Email customer service

Accessories

Product Overview

ETC's UFMP4 is a 4-zone DMX Foundry Mini Panel with four relays and four 0-10V dimming outputs. Each Foundry Mini Panel from ETC can be wired with a discrete power input for each circuit, or a single input may be shared across multiple circuits. With support for both 120V and 277V circuits simultaneously, as well as normal and emergency circuits, allowing these Foundry Mini Panels to offer unmatched flexibility. Fully isolated 0-10V dimming is also standard for each output, meaning Foundry Mini Panels offer outstanding versatility in a compact, robust package.

DMX-controlled Unison Foundry™ products are the perfect partners for Unison Paradigm® and Mosaic® systems to create a complete, economical lighting control package. The Foundry Mini Panel takes 20A branch circuit input and provides four or eight switched power control outputs with fully-isolated 0-10V dimming per output.

Applications:

  • Arena and stadium suites
  • Office buildings
  • Conference and meeting rooms
  • Healthcare facilities
  • Houses of worship
  • Classrooms
  • Hospitality and restaurants
  • Retail

ETC UFMP Foundry Mini Panel Features:

  • Switched power control of four or eight circuits with 0-10V dimming
  • 120 or 277VAC power input per zone
  • 20 Amp fully rated relays for use with general purpose, tungsten, fluorescent, LED and plug loads
  • 0-10V dimming output per zone for direct connection to dimming ballasts and LED drivers
  • Demand Response load shedding contact input
  • UL924 control bypass via:
    • Contact closure input
    • Normal power loss sense feed terminals
  • DMX controlled and RDM configurable

ETC UFMP Foundry Mini Panel Series Specifications:

  • Functional:
    • Control for up to eight zones of switching for lighting and plug loads
    • Control for up to eight zones of 0-10V dimming for LED drivers and fluorescent ballasts
    • UL924 emergency-lighting control via contact closure and power loss sense feed terminal
    • Demand Response input provided by a power company can enforce a maximum level per circuit while active
    • Supports USITT DMX512-A (ANSI E1.11)
    • Supports RDM (ANSI E1.20)
  • Mechanical:
    • Constructed of 16-gauge cold-rolled steel, finished in fine-textured, black powder coat
    • Wall-mount installation; -- rated for installation in plenum air space
    • Class-1 voltage barrier prevents access to line-voltage wiring with front panel removed
    • Optional voltage divider allows for separation of normal and emergency circuits in a single controller where allowed by local codes
  • Electrical:
    • 100-277V, 50/60Hz power input per circuit with support for pass thou to multiple circuits
    • Supports 120V and 277V circuits within the same panel
    • 20-Amp, fully-rated bi-state latching relay per output
    • 0-10VDC control rated for up to 100mA sink per output
    • 0-10V outputs are fully isolated from ground to 2500V RMS
    • Rising clamp screw terminal wiring connections for:
      • Line-voltage relay power input, output and pass-through with support for 14-8 AWG wire
      • Low-voltage 0-10V dimming output per zone with support for 22-16 AWG wire
      • Separate normal power sense feed input for UL924 emergency lighting bypass
      • UL924 emergency lighting control contact closure input with support for 22-16 AWG wire
      • Demand Response contact input with support for 22-16 AWG wire
    • Demand Response input supports Normally Open (NO) operation
    • UL924 contact closure input supports normally open (NO) or normally closed (NC) operation
    • Onboard status indicators for controller power, DMX signal, Demand Response input, and UL924 emergency lighting control
    • Slide switch configuration for:
      • UL924 operation (NO/NC)
      • UL924 inclusion per circuit (on/off)
    • UL and cUL LISTED -- Conforms to UL508, UL2043, UL916 and UL924
  • DMX Input Port:
    • Optically-isolated input from the Mini Panel electronics
    • Withstands fault voltages of up to 250VAC
    • Integrated DMX/RDM termination
  • Configuration:
    • Remote configuration available via RDM devices such as:
      • ETC control console with RDM functionality
      • ETC DMX/RDM gateway networked to a device running ETC Net3 Concert software
    • Manual configuration of the starting DMX address, UL924 bypass, and Demand Response on the controller
  • Thermal:
    • Ambient room temperature: 32 to 122°F (0 to 50°C)
    • Ambient humidity: 5 to 95% non-condensing
  • Physical:
    • Dimensions (HxWxD): 9" x 12" x 3"
    • Weight: 6 lbs

Note:

Optional voltage divider available for use of mixed normal and emergency circuits in a single controller; where allowed by local code.

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Product Reviews

Reviewed by 1 customer
(1 is Verified Buyers.)

Write a Review

There are no reviews to display with the selected filters.

Manuel L on 01/29/2024 Verified - This reviewer has purchased this product

This relay system has greatly improved our lighting system. We no longer have to send someone to turn the light switches on/off. They are now switched remotely.

This cannot be empty.
This cannot be empty.
This cannot be empty.
Please Enter your First Name Please Enter your Last Initial
This cannot be empty.
500 characters remaining
Please Enter your Feedback

Thank you for submitting your comment. It is in a queue to be moderated.