Product Overview
KORG's next move is an even more faithful recreation of the original ARP Odyssey: it's the full-sized ARP ODYSSEY FS Duophonic Synthesizer. With a standard keyboard and a body that emanates a sense of solidity, it delivers great playability and a persuasive stage presence. Just like its original version, the instrument is assembled in the United States, faithfully carrying on the quality, sound, and spirit of the original. Choose from three designs: Rev1, Rev2, or Rev3. Only a small number of each is being produced. Don't miss your chance to obtain a full-sized ARP ODYSSEY – an instrument with decades of soul.
KORG ODYSSEYFSQ3 Includes:
- AC adapter (DC 12V)
- Power cable
- Phone cable
- Mini-phone cable
KORG ODYSSEYFSQ3 Features:
- Synthesis
- Control
- Connectors
KORG ODYSSEYFSQ3 Specifications:
- Keyboard: 37-note (Standard key or Full size key, No velocity sensitivity, No aftertouch)
- Maximum Polyphony: 2 voices for duophonic; normally monophonic
- Controllers:
- Transpose Positions: 2 octaves down, normal, 2 octave up
- Proportional Pitch Control:
- b (Pitch down) Pad: about -2 / 3 octave
- - (Modulation) Pad
- # (Pitch-up) Pad: about +2 / 3 octave
- Noise Generator: Noise Spectrum Types (white and pink)
- Portamento:
- Maximum Speed: about 0.01 msec./oct
- Minimum Speed: about 1.5 sec./oct
- VCO (Voltage Controlled Oscillator):
- Frequency Range: VCO-1 in low freq. mode, 0.2 Hz – 20 Hz: VCO-1 and VCO-2 (audio range) about 20 Hz – 20 kHz
- Warm Up Drift: 1/30 semitone from turn on max
- Pulse Width Modulation:
- Pulse Width: 50 % – 5 %
- Voltage Controlled Response: 1 V/oct
- Maximum Frequency Shifts:
- LFO sin wave, +1/2 oct.
- LFO square wave, +1.5 oct.
- ADSR, +9 oct.
- S/H, +2 oct.
- Waveforms: Sawtooth, Square, Pluse (Dynamic Pluse)
- VCF (Voltage Controlled Filter):
- Types: Low pass (I: 12 dB/oct., II III: 24 dB/oct.)
- Frequency Range: 16 Hz - 16 kHz
- Resonance: 1/2 - self oscillate
- Voltage Controlled Response:
- C3 key (left edge): 0 V
- C6 key (right edge) 3 V
- Maximum Usable Q: 30
- VCA (Voltage Controlled Amplifier): 80 dB Dynamic Range
- Ring Modulator:
- Type: Digital
- Input Signal: VCO-1, VCO-2 (square wave)
- Sample & Hold:
- Command Sources: Keyboard or LFO trigger
- Sampled Signals: VCO-1 sawtooth wave and square wave, VCO-2 square wave and pink noise
- ADSR Envelope Generator:
- Attack Time: 5 msec. - 5 sec.
- Decay Time: 10 msec. - 8 sec.
- Sustain Level: 0 - 100 % or Peak
- Release Time: 15 msec. - 10 sec.
- AR Envelope Generator:
- Attack Time: 5 msec. - 5 sec.
- Release Time: 10 msec. - 8 sec.
- Control Input Jacks:
- Pedal: 6.3 mm monaural phone jack
- Portamento Foot Switch: 6.3 mm monaural phone jack
- Audio Output Jacks:
- LOW:
- Connector: 6.3 mm monaural phone jack
- Maximum Output Level: -20 dBu@ 10 k ohm load
- Output Impedance: 10 k ohm
- HIGH:
- Connector: XLR connector
- Maximum Output Level: +4 dBu@ 1 k ohm load
- Output Impedance: 330 ohm
- Headphones Jack:
- Connector: 6.3 mm stereo phone jack
- Maximum Output Level: 50 mW + 50 mW@ 33 ohm load
- Output Impedance: 10 ohm
- External Audio Input (Ext Audio Input) Jack:
- Connector: 6.3 mm monaural phone jack
- Maximum Input Level: -10 dBu
- Input Impedance: 22 k ohm
- MIDI Connector: IN
- USB Connector: Type B
- CV IN/OUT Jacks:
- Keyboard CV (IN/OUT): 1 V/oct.
- Connector: 3.5 mm monaural phone jack
- GATE IN/OUT Jacks:
- GATE IN: +3 V (minimum)
- GATE OUT: +10 V, key down; 0 V all keys up
- Connector: 3.5 mm monaural phone jack
- TRIG IN/OUT Jacks:
- TRIG IN: +3 V pulse min., 10 µsec. Duration minimum
- TRIG OUT: +10 V pulse on key depression, 10 µsec. Duration
- Connector: 3.5 mm monaural phone jack
- Power Supply: AC adapter (DC 12V) + power cable
- Power Consumption: 7.1W
- Dimensions (WxDxH): 23.03” x 18.35” x 6.42” (585 x 466 x 163 mm)
- Weight: 16.09 lbs. (7.3 kg)
- Accessories:
- Expression/Volume Pedal: XVP-20
- Volume Pedal: VP-10
- Pedal Switch: PS-3
- Pedal Switch: PS-1
- Patch Cables: SQ-CABLE-6
