Questions? Call Us:

Radio Design Labs STM-DA3 [RESTOCK ITEM]
Microphone Level Distribution Amplifier


RDLs' STM-DA3 is designed for use in quality commercial sound, broadcast and recording applications.
Learn More
Sale Price: $126.12
List Price: $187.84
You save 33%!
Write the first review.
Radio Design Labs STM-DA3 [RESTOCK ITEM]
In Stock

Related Products

RDLs' STM-DA3 is designed for use in quality commercial sound, broadcast and recording applications. The 1.2 kOhm balanced input accepts a wide variety of microphone input levels without loading professional low impedance microphones. A multi-turn trimmer is user adjustable for either gain or loss in order to match the facility standard microphone levels. Three balanced outputs provide nearly total isolation between the output lines. Unlike mic-splitting transformer systems, the STM-DA3 also provides audio isolation. In fact, the audio isolation is so good that a +4 dBu signal fed into one output is still below the noise floor on the adjacent output. Loading of one output, including a direct short, has no effect on the other outputs.

NOTE: Radio Design Labs' PS-24AS power supply is NOT included but is required in order to power this product. Please see the "Accessories" tab or click here for more information on the PS-24AS power supply.

The STM-DA3 is built on the electrical architecture of RDL's low- noise studio quality mic preamplifiers. Dynamic or condenser microphones may be used with the STM-DA3. Standard 24 V phantom is supplied to the input when the supply voltage is connected to the PHM terminal. Optimum operating level is set using RDL's unique Dual-LED VU meter, located adjacent to the terminal block. A green LED illuminates at 15 dB below optimum level. The intensity of the green LED progresses from minimum to full intensity over a 15 dB range. The adjacent red LED illuminates when the operating level exceeds the optimum level. This makes the STM-DA3 easy to set up without any external test equipment, and operating levels may be monitored at the module.

NOTE: This is a RESTOCK item that has had its box opened or has been repackaged. It may have minor cosmetic flaws and may have been sold to a customer and returned. Please contact your Sales Pro for more information on this and other products.

RDL STM-DA3 Features:

  • Feed 1 Microphone to 3 Microphone Inputs
  • Electrical and Audio Isolation
  • Studio Quality Low-Noise, Low-Distortion Performance
  • Excellent Phase Response
  • Versatility of STICK-ON┬« Compactness

RDL STM-DA3 Specifications:

  • Input: 1200 Ohm balanced
  • Outputs (3): -45 dBu, 150 Ohm balanced
  • Gain Range: 17 dB, 10-turn trimmer adjustable:
        *Control fully CCW: Gain = -5 dB
        * Control fully CW: Gain= 12 dB
  • Frequency Response: 30 Hz to 20 kHz (+/- 0.2 dB)
  • THD: < 0.1%
  • IMD: < 0.1%
  • Noise: <80 dB (below -50 dBu output, -45 dBu input)
  • Headroom: > 20 dB (-50 dBu output, -50 dBu input)
  • CMRR: > 60 dB (100 Hz to 5 kHz)
  • Output Isolation: > 135 dB (balanced audio),> 150 dB (common mode)
  • Power Requirement: 24 - 33 Vdc @ 40 mA, Ground-referenced

Click to download

To be the first to review this item, click here.

Add to Cart

We're sorry, only of this item available

Call a Sales Pro at 800-356-5844 for more information

© 2018 Full Compass Systems, LTD  9770 Silicon Prairie Parkway, Madison, WI 53593  All rights reserved.

We are not responsible for typographical errors in pricing or product specification
inaccuracies in our catalog or web site. Prices are subject to change without notice.