DPA 4266-OC-F-F10-LH 4266 Omnidirectional Headset Microphone with TA4F Connector, Beige

Blending the legendary sound of their 4066 Omnidirectional Capsule with a lightweight, flexible Headset microphone, DPA Microphones' 4266-OC-F-F10-LH is quick and easy to adjust and delivers clean, transparent sound quality with a whole lot of headroom. This particular model comes supplied with a fixed TA-4F Mini-XLR adapter (compatible with Shure U1, UR1, UT1, SC1, SLX1, ULX1, TOA WM4300, PGX1, Line 6 XD-V70L - sold separately). It features a 110mm boom and comes in beige.

The 4266 Headset Microphone provides accurate, natural voice intelligibility along with very high SPL-handling capabilities. Users can both speak and sing into the mic with not a hint of distortion, and the capsule is optimized for low distortion and humidity resistance as well. This Dual-ear mount unit is your best choice for active performance situations where secure and consistent placement is of paramount importance.

One of the clearest, consistent, and most potent miniature mics available, the legacy 4066 is renowned for performing across a wide dynamic range as well as delivering low distortion across all SPLs. DPA's updated amplifier technology enables you to squeeze even more performance out of your mics with an additional 14 dB THD and Dynamic range.

From a whisper to a scream, you'll experience increased clarity and openness, so users will get more flexibility because a wider dynamic range enables a single mic to capture a wider range of sounds and in more varied applications. Additionally, 4266 microphones deliver water and moisture resistance through nano coating and hermetic sealing of sensitive internal electronics.

Includes

• 4266 Omnidirectional Headset Microphone with fixed TA-4F Mini-XLR connector
• (3) Foam Windscreens (DUA0560)

Features

• Pristine audio quality
• Lightweight and flexible
• Easy mounting to both the left and right
• Minimal visual impact
• Resistant to humidity

Specifications

• Directional pattern: Omnidirectional
• Principle of operation: Pressure
• Cartridge type: Pre-polarized condenser
• Frequency response: 20 Hz - 20 kHz
• Effective frequency range ±2 dB: Soft boost grid: 40 Hz - 20 kHz, 3 dB soft boost at 8 - 20 kHz. High boost grid: 40 Hz - 20 kHz, 10 dB boost at 12 kHz
• Sensitivity, nominal, ±3 dB at 1 kHz: 6 mV/Pa; -44 dB re. 1 V/Pa
• Equivalent noise level, A-weighted: Typ. 26 dB(A) re. 20 µPa (max. 28 dB(A))
• Equivalent noise level, ITU-R BS.468-4: Typ. 38 dB (max. 40 dB)
• Distortion, THD < 1%: 134 dB SPL RMS, 137 dB SPL peak
• Dynamic range: Typ. 111 dB
• Max. SPL, THD 10%: 144 dB SPL peak
• Rated output impedance: 30 - 40 Ω
• Cable drive capability: Up to 300 m (984 ft) with DAD6001-BC XLR Adapter
• Output balance principle: Signal balanced with DAD6001-BC XLR Adapter
• Common mode rejection ratio (CMRR): > 60 dB from 50 Hz to 15 kHz with DAD6001-BC XLR Adapter
• Power supply (for full performance):
  • For wireless systems: Min. 5 V - max. 10 V through DPA adapter
  • With DAD6001-BC: P48 (Phantom Power). Will work from 12 V
• Current consumption: Typ. 1.5 mA (microphone). 3.5 mA with DAD6001-BC XLR Adapter
• Connector: MicroDot, TA4F Mini-XLR, 3-pin LEMO, Mini-Jack
• Color: Beige
• Weight: Single Ear: 10 g (0.35 oz)
• Microphone diameter: 5.4 mm (0.21 in)
• Microphone length: 12.7 mm (0.5 in)
• Boom length: 110 mm (4.3 in)
• Cable length: 1.3 m (4.3 ft)
• Cable color: Beige
• Cable diameter: 1.6 mm (0.06 in)
• Polarity: Positively increasing sound pressure produces positive going voltage on MicroDot pin
• Temperature range: -40°C to 45°C (-40°F to 113°F)
• Relative humidity (RH): Up to 90%