Questions? Call Us:

Lectrosonics M2T (Dante)
Duet System Wireless Monitor Stereo Transmitter with Dante


A Digital Half-Rack Transmitter with analog and digital Dante™ network audio inputs...
Learn More
Our Price: $2,335.00
List Price: $3,193.00
You save 27%!
Write the first review.
Lectrosonics M2T (Dante)
Usually ships in 7-14 business days.
Need it sooner? Call us!

Related Products

A Digital Half-Rack Transmitter with analog and digital Dante™ network audio inputs, the M2T from Lectrosonics—part of their Duet digital in-ear monitor (IEM) wireless monitor and IFB system series—presents an excellent sounding IEM system with a unique level of performance in a wireless IEM. Its ultra-low latency 24-bit audio, digital RF modulation, and 2 stereo digital channels all make for a truly exclusive IEM product for demanding, professional use. It boasts a USB port for firmware updates and an IR port for quick setup. Plus, its large, high resolution, backlit LCD and large membrane switches offer an intuitive interface that's highly visible both in daylight or dimly-lit conditions. It provides 4 audio inputs which can be individually configured to be analog or Dante compatible, and are full-size locking XLR/TRS combo types for balanced line level analog signals. Its input preamp circuits use a special balanced amplifier with very high common-mode rejection, minimizing hum and noise. Analog signals are converted to an internal 24-bit digital format which is then encoded, organized into packets, and passed to an RF modulator. The modulated RF signal is filtered before and after amplification for suppression of out-of-band noise and spurious signals.

Conventional wireless IEMs rely on decades-old technology, that is, FM transmission with multiplexed, companded audio. The M2T Transmitter incorporates newer, unique technology to deliver ruler-flat frequency response from 20 Hz to 15 kHz along with maximum channel separation. Also, the digital audio eliminates a compandor and its associated artifacts. This results in crystal-clear sound, rock-solid stereo imaging, and extremely low distortion of <0.05%.

Designed and developed with the professional touring, installation, theater, and Broadcast customers in mind, the M2T transmitter chassis features all-metal construction, with an aluminum extrusion front panel, plus a durable powder-coat finish.

Summary of Dante Benefits with the M2T:

  • Plug-and-play technology – automatic discovery and simple signal routing
  • Reduced Cost & Complexity- No special skills required to set up audio networking
  • Sample accurate playback synchronization
  • Lowest latency available from any networking technology
  • Add/remove/rearrange components at will
  • Deterministic latency throughout the network
  • Support mixed bit depths and mixed sample rates over one network
  • Scalable, flexible network topology supporting a large number of senders and receivers
  • Supports 1Gbps networks
  • Supports a single integrated network for audio, video, control, monitoring
  • Uses inexpensive, off-the-shelf computer networking equipment
  • Wireless Designer™ Software for setup and system monitoring over network or USB

Lectrosonics M2T Features:

  • IEM (Wireless Monitor) with digital RF transmission
  • 24-bit digital audio
  • (2) independent stereo audio transmissions per Â˝-rack enclosure
  • USB port for firmware updates
  • Fully Dante compatible
  • IR (infrared) port for fast setup
  • Up to 50 mW per Rf carrier
  • All-metal housing

Lectrosonics M2T Specifications:

  • RF Power Output: 2 RF carriers, 25 mW, 50 mW; adjustable
  • Antenna Output: 2 x BNC sockets
  • Operating Frequencies: 470.1 – 607.975 MHz
  • Frequency Selection Steps: 25 kHz
  • Frequency Stability: ± 0.002%
  • Modulation: 8 PSK
  • Emission Designator: 200KG7E
  • Spurious Radiation: >90 dB below carrier
  • Equivalent input Noise: –128 dBV
  • Audio Frequency Response: 20 HZ - 15 KHZ, -3 dB
  • Audio Input: -10 dBv or +4 dBu settings with ±5 dB trim
  • Audio Input Jack: 4 x combo locking XLR/TRS connectors
  • Dante Connection: 2 x RJ45, Internally routable with Ultimo 4x4 module
  • Ethernet Connection: RJ45
  • USB Connection: Micro USB on front panel for firmware updates
  • IRDA: IR transceiver for sync of receivers
  • Input impedance: Line: 2 kOhm
  • Headphone jack: ÂĽ" stereo (TRS) 
  • Power Requirements: 9-18V DC
  • Power Consumption: 5 Watts
  • Dimensions (H x W x D): 1.750" x 8.375" x 7.750" (44.45 x 212.7 x 196.8mm)

Information & specifications subject to change without notice.

To be the first to review this item, click here.

Add to Cart

We're sorry, only of this item available

Call a Sales Pro at 800-356-5844 for more information

© 2018 Full Compass Systems, LTD  9770 Silicon Prairie Parkway, Madison, WI 53593  All rights reserved.

We are not responsible for typographical errors in pricing or product specification
inaccuracies in our catalog or web site. Prices are subject to change without notice.