(0)

Questions? Call Us:
800-356-5844

Powersoft Advanced Tech X4 DSP+DANTE
4-Channel Amplifier Platform featuring DSP and DANTE

OUR PART #:  X4-DANTE

The innovative X4 DSP+DANTE, part of the X Series from Powersoft, evolves the whole concept of the amplification platform...
Learn More
4-Channel Amplifier Platform featuring DSP and DANTE

Call for price! Not available online.
List Price: $9,080.00

Similar Products

The innovative X4 DSP+DANTE, part of the X Series from Powersoft, evolves the whole concept of the amplification platform, implementing the integration of a worldwide-compatible power-box, and a full-feature DSP built right into the power amplifier.

Heralding a new and innovative level of signal processing, the complete digital audio signal management system based on ARM Cortex A-8 processor and TI C6000 DSP platform provides non-boolean routing and mixing, multi-stage equalization with raised-cosine, IIR and FIR filters, delay of up to 4 s in input processing and 200 ms for time alignment, gain and polarity adjustment, crossover, peak limiters, TruePower™ limiters and Active DampingControl™.

Its power supply provides worldwide AC compatibility and direct connection to any regional power line configuration: it is now suitable to Single Phase, Bi-Phase or 3-Phase operation from 85 VAC up to 440 VAC with no need for manual selection. True 3-Phase load balancing is directly achievable by the unit without any complex load assignment in the power distribution system design.

Powersoft X Series
Powersoft X Series raises power amplification to a new standard of quality and usability. Powersoft X Series innovates the concept of amplifier platform: it implements a new system of channel routing, new worldwide compatible 3-phase power supply, and a revolutionary full-featured DSP.

Powersoft X Series natively supports AES3, two redundant Dante™ by Audinate® digital streams and analog inputs, providing up to 4 different selectable input sources per channel.

Powersoft X4 DSP+DANTE Features:

  • Innovative power supply design
    • Suitable for Single-Phase, Bi-Phase or 3-Phase operation from 85 VAC up to 460 VAC, the X4 power supply provides maximum flexibility and versatility in any power distribution design.
    • Power Load Balancing with Power Factor Correction enhances efficiency in power distribution.
    • Smart Rails Management increases efficiency by means of the dynamic rails modulation.
    • The legendary Powersoft Green Audio Power® technologies improves efficiency and minimizes the 'carbon footprint' and the operational costs.
  • New standard of quality and usability
    • Flexible routing/mixing provided by the internal 4x4 input/output matrix, allows the user to mix and route analog and digital I/O.
    • Easy plug-and-play Dante™* networking allows easy routing of the signal from any node within the network to Powersoft X4.
    • 4 input channels with physical analog and digital AES3 connectors and 2 redundant Dante™ connection provide maximum flexibility.
    • Improved reliability thanks to the customizable input backup policy that allows to automatically switch input source in case of signal failure.
    • Complete user interface integrated into Armonía Pro Audio Suite™.
    • WiFi® remote monitoring through mobile device.
  • Highly integrated
    • Top-grade DSP with high dynamic range and extensive feature set.
    • Multi-stage signal processing: innovative solutions for modeling speakers behaviour and power handling.
    • Input and output IIR, FIR, IIR+FIR equalizers and raised-cosine filters.
    • Complete sets of limiters: peak, RMS voltage, RMS current, and TruePower™.
    • Compensation of the speaker cable losses with Active DampingControl™.
  • Even more reliabile
    • Full protection circuitry: over/under AC voltage; troublesome signals (clipping, VHF, long-term RMS); DC; thermal; short circuit; mute at power on/off.

Powersoft X4 DSP+DANTE Specifications:

General

  • Number of channels: 4

Output power

  • Single channel mode:
    • 2 Ohms: 5200 W
    • 4 Ohms: 3000 W
    • 8 Ohms: 1600 W 
  • Bridge mode:
    • 4 Ohms: 10400W
    • 8 Ohms: 6000W
  • Max output voltage / current:
    • Single channel mode (@ 2/4/8 Ohms): 175 Vpeak/130 Apeak

AC Mains Power

  • Power supply: Universal, Single Phase, Bi-Phase or 3-Phase acceptance, switching mode with PFC
  • Operating voltage: 85 V - 440 V   
    Environmental
      
    Operating temperature range: 0° - 45° C - 32° - 113° F

Audio

  • Noise floor: -70 dBV (20 Hz - 20 kHz, A weighted)
  • THD+N: < 0.5% (typically < 0.01%)
  • IMD: < 0.5% (typically < 0.01%)
  • Input impedance: 20 kOhms balanced
  • Slew rate: > 50 V/µs
  • Damping factor: > 5000 @ 8 ohm, 20Hz - 500Hz

DSP  

  • DSP architecture: ARM Cortex A-8 processor and TI C6000 DSP platform
  • A/D Converter: Dual 24-bit/96 kHz Tandem® architecture with 127 dBA of dynamic range
  • D/A Converter: Dual 24-bit/96 kHz Tandem® architecture with 122 dBA of dynamic range
  • Internal precision: 40-bit floating point
  • Firmware  Network upgradable firmware
  • Input equalizer: Raised-cosine, custom FIR, parametric IIR: peaking, hi/lo-shelving, all-pass, band-pass, band-stop, hi/lo-pass
  • Output equalizer: Raised-cosine, custom FIR, parametric IIR: peaking, hi/lo-shelving, all-pass, band-pass, band-stop, hi/lo-pass
  • Crossover: Linear phase (FIR), hybrid (FIR-IIR), Butterworth, Linkwitz-Riley, Bessel: 6 dB/oct to 48 dB/oct (IIR)
  • Delay: up to 4 s on input section; up to 200 ms per output for time alignment
  • Limiters: TruePower™, RMS voltage, RMS current, Peak limiter
  • Damping control: Active DampingControl™

Physical

  • Dimensions (LxHxW): 19.0" x 1.7" x 19.5" (483 x 44 x 495mm)


*All information, specifications, and data is subject to change without notice.

Add to Cart

We're sorry, only of this item available



Call a Sales Pro at 800-356-5844 for more information

© 2017 Full Compass Systems, LTD  9770 Silicon Prairie Parkway, Madison, WI 53593  All rights reserved.

We are not responsible for typographical errors in pricing or product specification
inaccuracies in our catalog or web site. Prices are subject to change without notice.