(0)

Questions? Call Us:
800-356-5844

Radio Design Labs HD-MA35U
35 Watt Mixer Amplifier - 4/8 Ohm Outputs

OUR PART #:  HD-MA35U

The Radio Design Labs HD-MA35U is a four input audio mixer amplifier for systems demanding the broadest range of features and the highest energy efficiency.
Learn More
Our Price: $320.09
List Price: $458.76
You save 30%!

Full Compass offers free ground shipping on thousands of stock and non-stock (special order) items for orders placed on this web site and shipping in the continental US (48 states).

Learn More

Free Shipping

Available

We guarantee to match pricing on the products we sell for new, identical and immediately available products if you see them offered at a lower price. Please contact us if you find a lower price before purchasing.

Learn More

Low Price

Guaranteed

Radio Design Labs HD-MA35U
Qty:
Usually ships in 7-14 business days.
Need it sooner? Call us!

Similar Products

The Radio Design Labs HD-MA35U is a four input audio mixer amplifier for systems demanding the broadest range of features and the highest energy efficiency. Two output power amplifier zones, 35 watts (Zone 1) and 4 watts (Zone 2), are driven from high-efficiency Class D amplifier stages. The mixer and amplifier sections all normally shut down (standby “sleep” mode) when audio is absent and automatically turn on when needed. The Zone 1 amplifier output level may be VCA controlled using various optional RDL remote controls, or by industry standard 0 to 10 Vdc or 0 to 10k ohm controls. This output drives 4 ohm or 8 ohm speakers. The output impedance is switch-selectable on the rear panel. The Zone 2 amplifier output drives an 8 ohm speaker and/or 600 ohm telephone equipment.

The HD-MA35U has four inputs that are common to both mixers. Inputs 1 and 2 accept balanced mic or line level sources. Inputs 3 and 4 accept unbalanced mono or stereo line-level sources.

  • Input 1 is switch-selectable MIC or LINE. Phantom voltage (IEC standard 24 Vdc) is switch-selectable for the microphone input. The line input is transformer isolated and accepts balanced or unbalanced, high or low impedance audio sources. A gain trimmer is provided to set the input preamplifier to the optimum gain for the installation.
  • A paging source is normally connected to Input 1. This input is equipped with push-to-talk terminals and with an adjustable threshold VOX circuit with LED threshold indicator, either (or both) of which may be set to duck (“fade down” or “mute”) inputs 2, 3 and/or 4 by 25 dB when a paging signal is active on Input 1. The attenuated inputs fade up to normal volume when the paging message is finished. A rear-panel trimmer allows the start of the fade-up to be delayed from 2 to 6 seconds.
  • Input 2 is switch-selectable MIC or LINE. Phantom voltage (IEC standard 24 Vdc) is switch-selectable for the microphone input. The line input is active balanced and accepts balanced or unbalanced, high or low impedance sources. A gain trimmer is provided to set the input preamplifier to the optimum gain for the installation.
  • An RDL Dual-LED VU meter is provided on the rear panel to indicate proper gain adjustment for Inputs 1 and 2. Correct input gain adjustment insures adequate mixer stage headroom.
  • Inputs 3 and 4 each provide unbalanced stereo RCA input jacks, summed to mono.

RDL HD-MA35U Features:

  • Four inputs with individual front-panel volume controls
  • Bass and Treble tone controls
  • Designed for background music with paging and music-on-hold
  • Master volume VCA controlled with remote adjustment capability
  • Manual or automatic (VOX) priority ducking
  • Balanced inputs and amplified outputs on detachable terminal blocks
  • Unbalanced inputs and outputs on RCA jacks
  • Includes power supply
  • Automatic sleep mode meets strictest energy saving standards

RDL HD-MA35U Specifications:

  • Amplifier Zones (2):
    • Zone 1 (Main): 35 W RMS, front-panel mixer (user controls)
    • Zone 2: 4 W RMS (8 Ohms), rear-panel mixer (trimmers)
  • Audio Inputs (5):
    • 2, balanced, mic or line switch selectable on terminal blocks
    • 2, unbalanced stereo summing inputs on RCA jacks
    • 1, unbalanced amp in on RCA jack
  • Gain Adjustments (2): Inputs 1 and 2: Rear-panel single-turn trimmer
  • Maximum Input Level:
    • Mic Inputs: -9 dBu
    • Balanced line inputs: + 20 dBu
    • Unbalanced Inputs: + 5 dBV (+11 dBV, one input)(for 1% THD+N at output)
  • Phantom Voltage: 24 Vdc (IEC 61938: 2013), switch-selectable for each mic input
  • Ducking/Muting Actuation: Automatic (Input 1 VOX: rear-panel adjustable signal threshold with LED indicator) or Manual (contact closure to ground)
  • Ducking/Muting Release Delay: Rear-panel single-turn trimmer, adjustable 2 to 6 seconds
  • Ducking/Muting: Switch-selectable for inputs 2, 3 and/or 4, 25 dB ducking attenuation, nominal
  • Effects Loop: Unbalanced RCA jacks (preamp output from main mixer, input to power amplifier)
  • External RDL Module Power Output: 24 Vdc, 100 mA maximum, ground-referenced
  • Input level (to cross compressor threshold equaling 23 W amplified output):
    • Mic Inputs: -50 dBu (2.5 mV), (front panel and rear trimmer at max.)
    • Balanced line inputs: -21 dBu (70 mV), (front panel and rear trimmer at max.)
    • Unbalanced Inputs: -15 dBV (180 mV), (front panel and rear trimmer at max., both inputs driven)
  • Noise (line or amplified outputs): 
    • Mic or Balanced line inputs: -70 dB (below compressor threshold at max gain)
    • Unbalanced Inputs: <-75 dB (max gain)
  • THD+N: < 0.5% (1 kHz at compressor threshold, main amp output); < 0.1% (line output, main)
  • CMRR:
    • Mic inputs: > 50 dB (50 Hz to 120 Hz)
    • Balanced line inputs: > 80 dB (50 Hz to 120 Hz, transformer-coupled input)
  • Compressor: Threshold 2 dB below rated output, automatically adjusting attack and release times
  • Frequency Response (mixer):
    • Mic to line output: ±1.5 dB (40 Hz to 25 kHz)
    • Balanced line input to line output: ±1 dB (20 Hz to 20 kHz)
    • Unbalanced line input to line output: ±0.5 dB (20 Hz to 20 kHz)
  • Frequency Response (amplifiers): ± 1 dB (50 Hz to 20 kHz)
  • Tone Controls: ±10 dB @ 10 kHz, ±9 dB @ 100 Hz (front-panel) with center detent
  • Audio Outputs (2): -10 dBV nominal (316 mV), dual mono unbalanced RCA (main mixer; FLAT or EQUALIZED, switch selectable on rear panel); 0 dBu nominal balanced, terminal block (zone 2 mixer)
  • MOH Output: 0 dBu nominal (775 mV), 600 Ohm transformer-isolated, 16 dB headroom
  • Power Amplifier Outputs (2):
    • Zone 1 (main, <1% THD+N): 35 W RMS (4 Ohms), 32 W (8 Ohms) on detachable terminal block (switch-selectable 4 or 8 Ohm impedance)
    • Zone 2: 4 W (8 Ohms, on detachable terminal block)
  • Indicators (9):
    • Front-panel: Signal present (4; 1 per input, green), Compressor activity (red), Power (bright=on, dim=standby, blue)
    • Rear-panel: dual-LED VU meter (for inputs 1 and 2, green/red), Ducking/muting threshold (yellow)
  • VCA: Zone 1 (main) master level (with switch-selectable input 1 bypass), 0 to 10 Vdc control, RJ45 (compatible with RDL VCA wall controls)
  • Front-panel controls (7): Zone 1 (main) mixer level controls (4, inputs 1 through 4), EQ (2, bass and treble), Power (momentary pushbutton, toggle on/standby)
  • Rear-panel controls (22): Gain trimmers (2, input 1 and 2), Mic/Line switch (2, input 1 and 2), Zone 1 line output pre/post-EQ switch, Effects loop bypass switch, Sleep (standby) mode delay (4 binary switches), Input 1 ducking/muting detector sensitivity trimmer, Phantom voltage switches (2, input 1 and 2), Ducking control switches (3, to duck inputs 2, 3, and/or 4), VCA paging bypass (includes or excludes input 1 from master VCA control), Zone 2 mixer level controls (4, inputs 1 through 4)
  • Efficiency Standard: “Energy Star® Program Requirements for Audio/Video” Version 2.0
  • Sleep Mode Power Consumption: < 1 W (amplifier and included power supply)
  • Sleep Mode Delay: 10 minutes to 2 hours (switch-selectable in 10 minute increments)
  • Sleep Mode Disable: Selectable
  • Active Mode Delay: 2 seconds (nominal) after input audio detected
  • Audio Detector Threshold: -80 dBu mic (at max input gain), -55 dBu balanced line (at max input gain), -42 dBV unbalanced
  • Ambient Operating Environment: 0° C to 50° C Maximum; 20° C Recommended
  • Power Supply (included): 100 to 240 Vac, 50-60 Hz, 50 W; 24 Vdc output to amplifier chassis
  • Dimensions (HxWxD): 3.5" x 8.5" x 10" (8.89 x 21.6 25.4 cm)
  • Weight: 5.6 lb.(2.5 kg)
  • Package Type: Cardboard Box
  • Package Dimensions: 17.75" x 9.125" x 3.9375"
  • Shipping Weight: 8.105 lbs.
  • WEEE weight: 6.395 lbs.
  • Tariff code: 8518.50.0000
HD Series Wall Bracket for "U" models
Radio Design Labs HD-WM1 HD Series Wall Bracket for "U" models
Radio Design Labs' HD-WM1 mounts a compatible HD series product and its power supply to a wall or other flat surface.  The interior of the bracket holds the power supply with space to conceal excess wire length for a professional ...
60.16 80.48 25
Usually ships in 7-14 business days.
Need it sooner? Call us!
Rack Adapter for 2x HD Series Products
Radio Design Labs HD-RA2 Rack Adapter for 2x HD Series Products
Radio Design Labs' HD-RA2 allows you to rack mount 2 HD series products.  Mixer amplifiers may be mounted forward for use control, or may be recessed securely behind a filler panel.Shipping Weight: 4.4 lbsPackage Dimensions: 20" x ...
56.99 76.21 25
Usually ships in 7-14 business days.
Need it sooner? Call us!
10.4" Rack Mount for HD Series Products
Radio Design Labs HD-HRA1 10.4" Rack Mount for HD Series Products
RDL's HD-HRA1 mounts one RDL HD series product. Mixer amplifiers may be mounted forward for user control, or may be recessed securely behind a filler panel (sold separately). This adapter fits 10.4" racks.
53.09 71.02 25
Usually ships in 7-14 business days.
Need it sooner? Call us!
HD Series Filler Panel with Lens
Radio Design Labs HD-FP2L HD Series Filler Panel with Lens
RDL's HD-FP2L mounts in front of an HD series product to allow viewing while preventing user adjustment or tampering. Lens is removable during setup.
48.43 64.77 25
Usually ships in 7-14 business days.
Need it sooner? Call us!
HD Series Amplifier Rear Cover
Radio Design Labs HD-BP1 Back-Pack HD Series Amplifier Rear Cover
RDL's HD-BP1 back-pack mounts to an RDL HD series mixer/amplifier to prevent user access to the rear panel. The back-pack holds the power supply and provides a completely closed back for the installed amplifier.
45.64 61.06 25
Usually ships in 7-14 business days.
Need it sooner? Call us!
HD Series Filler Panel
Radio Design Labs HD-FP1 HD Series Filler Panel
RDL's HD-FP1 fills an unused half of a rack adapter or mounts in front of an RDL HD series product to prevent user adjustment or tampering.
28.87 38.62 25
Usually ships in 7-14 business days.
Need it sooner? Call us!
HD Series Amplifier Security Cover
Radio Design Labs HD-ASC1 HD Series Amplifier Security Cover
RDL's HD-ASC1 mounts to an RDL HD series mixer/amplifier to prevent user adjustment or tampering. The power button and associated indicators remain accessible with the HD-ASC1 installed.
25.65 34.29 25
Usually ships in 7-14 business days.
Need it sooner? Call us!
Add to Cart

We're sorry, only of this item available



Call a Sales Pro at 800-356-5844 for more information

© 2017 Full Compass Systems, LTD  9770 Silicon Prairie Parkway, Madison, WI 53593  All rights reserved.

We are not responsible for typographical errors in pricing or product specification
inaccuracies in our catalog or web site. Prices are subject to change without notice.