Radial Engineering LX3 Line Splitter, Passive, 1 Input, 1 Direct Out and 2 Jensen Isolated Outputs

The Radial Engineering LX-3 is a passive line-level splitter that distribute a balanced audio signal to up to three destinations noiselessly. It features premium Jensen isolation transformers for exceptional audio quality, and XLR/TRS combo inputs for easy connectivity.

The LX-3 has three XLR outputs, two of which are transformer isolated. The splitter has ground lifts on each XLR output to further reduce buzz and hum from ground loops, ensuring that the signal reaches each destination noise-free. For especially hot input signals, a -12 dB pad switch can be activated to cool down the signal.

As with all Radial products, it is built with tough materials and the bookend shape protects your connections in case of drops. For a reliable and noiseless line splitter, why look anywhere else than the Radial LX-3?

Features

• Send one audio signal to three destinations simultaneously
• Jensen transformer-equipped for exceptional audio quality
• Eliminates hum and buzz caused by ground loops
• Combo jack input for 1/4" TRS or XLR sources

Specifications

• Audio Circuit Type: Passive, transformer based
• Transformer: Jensen JT-123-FLPCH
• # of Channels: 1 in, 3 Out
• Frequency Response: 20 Hz to 20 kHz, ±0.5 dB
• Dynamic Range: 140 dB
• Gain: -1.5 dB
• Phase Deviation: +0.6° @ 20 Hz
• Common Mode Rejection Ratio: 105 dB @ 60 Hz, 70 dB @ 3 kHz
• Noise: -120 dBu
• Input Connector: Comobo XLR/TRS
  • Input Impedance: 712 Ω
  • Maximum Input: +20 dBu
• Output Connectors: 3 x XLR (two isolated, one direct)
  • Output Impedance: 112 Ω
• Features: Input pad, ground lifts
• Construction: 14-gauge steel
• Power: Passive, no power required
• Conditions: For use in dry locations only, 5-40°C
• Dimensions: 2" x 3.3" x 5" (48 x 84 x 127 mm)
• Weight: 1.5 lbs (0.7 kg)