Biamp D6-B 6.5" 2-Way High Output Ceiling Speaker, Black

The Community D6-B is a 6.5" ceiling speaker, black.

The D6 has a more focused dispersion, higher sensitivity, output and greater LF extension than the smaller models. The high performance D6 is a true coaxial loudspeaker with a real compression driver concentrically arranged so that the upper frequencies emerge through the center of the low-frequency driver’s magnetic structure and cone via a precisely tapered Tru-Phase™ high-frequency waveguide. This special construction provides consistent, wide dispersion up to 16 kHz, all but eliminating high-frequency narrowing. Further pattern improvement is achieved by precisely mounting the low frequency driver (and its concentric HF driver) centered in the baffle, as contrasted to the offset designs used by others.

The D SERIES offers powerful magnetic structures and efficient coils to ensure high output, which results in more headroom per power amplifier. Each D SERIES ceiling model is available as a complete assembly, including everything needed for standard installations, and can also be ordered as separate faces and back cans. The model has a built-in autoformer allowing it to be used in 8-ohm or 70V/100V applications. The D SERIES ceiling loudspeakers are ETL listed and all models have been tested by ETL to comply with UL1480, UL2043 and CSA60065.

Community D6-B Features:

• Drop-Stop™ and Twist-Assist™ tabs
• Superb intelligibility with reduced distortion, uniform voicing
• Easy installation
• Carbon Ring Cone Technology and Tru-Phase™ waveguide

Community D6-B Specifications:

• Ceiling Loudspeaker Type: Full Range Coax
• Max Input Power Rating: 100 Watts
• Maximum Voltage at Driver (RMS): 30.98 V (100W)
• Nominal -6 dB Beamwidth: 125° conical
• HF Compression driver (VC dia.): .803" / 20.4 mm
• LF loudspeaker (cone dia.): 6.5" / 165.1 mm
• LF loudspeaker (Voice Coil dia.): 1.5" / 38.1 mm
• Low Impedance: 8 ohms
• Grille: Powder Coated Steel Grille with Safety MetalClip\
• Included Accessories: (2) C-Ring Supporting Plates, (2) Grilles, (2) paintmasks, cut-out template, screwdriver