(0)

Questions? Call Us:
866-334-8859

QSC AD-C4T
Ceiling Speaker, 70/100V, White, Sold In Pairs

OUR PART #  AD-C4T-WH

Our Price: $150.00
(Low Price Guarantee)

This product must be purchased in multiples of 2

Qty: Free Shipping Available

In Stock

The QSC AD-C4T is a ceiling speaker with consistent tonal characteristics across the entire AcousticDesign™ family in both surface or ceiling applications. The AD-C4T features DMT (Directivity Matched Transition™) waveguide ensures smooth, uniform frequency response over the coverage area.

Note: This item is priced as each but sold in pairs. For more information please contact your Full Compass Sales Pro.

QSC AD-C4T Features:

  • Consistent tonal characteristics across the entire Acousticm Design™family in both surface or ceiling applications
  • DMT (Directivity Matched Transition™) wave guide ensures smooth, uniformfrequency response over the coverage area
  • Snap-fit magnetic grille
  • 3x double stepped, long travel dog-ear blind mount system
  • Advanced Intrinsic Correction™ voicings available via Q-SYS™ networkedaudio processing platforms, including CXD amplifiers
  • Low-saturation and low-loss 70/100V transformers with 16 Ohm bypass
  • Blemish-free removable logo
  • Removable conduit cover plate, also available as accessory for pre-installwiring

QSC AD-C4T Specifications:

  • Effective frequency range: 60 Hz – 20 kHz
  • Rated noise power / voltage: 30 watts / 22 volts(rms)
  • Sensitivity [dB]: 87.5
  • Rated coverage (-6 dB): 150° conical DMT
  • Maximum peak SPL [dB]: 108
  • Nominal impedance [ohms]: 16
  • Recommended amplifier: 60 watts
  • LF transducer: 114 mm [4.5 in] weather resistan tpaper cone woofer
  • HF transducer: 25 mm [1 in] aluminum dome tweeter
  • Input connector type: Euroblock connector with parallel output
  • Enclosure material: ABS baffle on powder coated steel back can
  • Grille material: Powder coated steel
  • Ingress protection: IP-54
  • Operating environment: Designed for indoor use
  • Operating temperature range: -20 to 50° C (-4 to 122°F)
  • Cutout dimension: Ø 195 mm (Ø 7.68 in)
  • Net weight: 2.9 kg (6.4 lb)
  • Product dimensions (Diameter x Height): Ø 230 x 176mm (Ø 9.06 x 6.93 in.)
  • Shipping weight: 9.3 kg [20.5 lb] (pair packed)
  • Shipping dimensions (H x W x D): 279 x 711 x 318 mm[11 x 28 x 12.5 in](pair packed)
  • Included accessories: C-ring and tile rails, rail screws,euroblockconnector, cut-out template, grille

QSC AD-C4T
Ceiling Speaker, 70/100V, White, Sold In Pairs

OUR PART #  AD-C4T-WH

Product Information:

The QSC AD-C4T is a ceiling speaker with consistent tonal characteristics across the entire AcousticDesign™ family in both surface or ceiling applications. The AD-C4T features DMT (Directivity Matched Transition™) waveguide ensures smooth, uniform frequency response over the coverage area.

Note: This item is priced as each but sold in pairs. For more information please contact your Full Compass Sales Pro.

QSC AD-C4T Features:

  • Consistent tonal characteristics across the entire Acousticm Design™family in both surface or ceiling applications
  • DMT (Directivity Matched Transition™) wave guide ensures smooth, uniformfrequency response over the coverage area
  • Snap-fit magnetic grille
  • 3x double stepped, long travel dog-ear blind mount system
  • Advanced Intrinsic Correction™ voicings available via Q-SYS™ networkedaudio processing platforms, including CXD amplifiers
  • Low-saturation and low-loss 70/100V transformers with 16 Ohm bypass
  • Blemish-free removable logo
  • Removable conduit cover plate, also available as accessory for pre-installwiring

QSC AD-C4T Specifications:

  • Effective frequency range: 60 Hz – 20 kHz
  • Rated noise power / voltage: 30 watts / 22 volts(rms)
  • Sensitivity [dB]: 87.5
  • Rated coverage (-6 dB): 150° conical DMT
  • Maximum peak SPL [dB]: 108
  • Nominal impedance [ohms]: 16
  • Recommended amplifier: 60 watts
  • LF transducer: 114 mm [4.5 in] weather resistan tpaper cone woofer
  • HF transducer: 25 mm [1 in] aluminum dome tweeter
  • Input connector type: Euroblock connector with parallel output
  • Enclosure material: ABS baffle on powder coated steel back can
  • Grille material: Powder coated steel
  • Ingress protection: IP-54
  • Operating environment: Designed for indoor use
  • Operating temperature range: -20 to 50° C (-4 to 122°F)
  • Cutout dimension: Ø 195 mm (Ø 7.68 in)
  • Net weight: 2.9 kg (6.4 lb)
  • Product dimensions (Diameter x Height): Ø 230 x 176mm (Ø 9.06 x 6.93 in.)
  • Shipping weight: 9.3 kg [20.5 lb] (pair packed)
  • Shipping dimensions (H x W x D): 279 x 711 x 318 mm[11 x 28 x 12.5 in](pair packed)
  • Included accessories: C-ring and tile rails, rail screws,euroblockconnector, cut-out template, grille
Add to Cart

We're sorry, only of this item available



Call a Sales Pro at 800-356-5844 for more information

© 2016 Full Compass Systems, LTD  9770 Silicon Prairie Parkway, Madison, WI 53593  All rights reserved.

We are not responsible for typographical errors in pricing or product specification
inaccuracies in our catalog or web site. Prices are subject to change without notice.