RDL RU-FNP Network Interface, 1 Format A, 1 Balance Line Aux Input, Dante Output, PoE

The RU-FN modules are Dante audio network interface products compatible with RDL Format-A twisted pair products. These modules are designed to be mounted in equipment racks, closets, conference tables and on shelves or backboards in commercial/industrial installations.

The RU-FN is an RDL Format-A receiver that connects to a Dante-enabled network. It converts the three Format-A audio pairs to Dante networked digital audio channels. Each network channel corresponds to Pair A, B or C of the Format-A input. The unit converts a fourth input, balanced or unbalanced line-level AUX, to Dante.

The RU-FNP is equipped for PoE which powers the RU-FN and the connected Format-A senders.

Radio Design Labs RU-FNP Features:

• Converts RDL Format-A and Aux Source to Four DanteNetwork Channels
• Easy Installation with Format-A Connections on RJ45through CATx Cable
• Format-A Audio Sources from Pairs A, B and CConverted to Dante
• Fourth Dante Audio Channel Fed from Unbalanced orBalanced Aux Line Input
• Front-Panel Gain Adjustment with Dual-LED VU Meterfor Aux Input
• Signal LEDs Indicate Audio for Each of the ThreeFormat-A Pairs
• High Resolution 24 Bit Analog to Digital Conversion
• Legendary RDL Analog Filtering Enhances Superb AudioPerformance
• Powers Remote Format-A Senders through Format-A InputJack
• LED Indicators Show Network Sync Status
• Normal or Hot-Standby Operation from PoE (ModelRU-FNP)
• Compatible with Wide Array of RDL Format-A Active andPassive Senders
• Equipped for Rack Mounting or Surface Mounting

Radio Design Labs RU-FNP Specifications:

• Network Connector: RJ45 with Link and Speed indicators
• Digital Audio Ethernet Protocol: Dante
• Transmission Rate: 100 Mbps
• Frequency Response: 20 Hz to 20 kHz (+/- 0.5 dB)
• THD+N: < 0.1%
• Dimensions (W x H x D): 5.8 x 1.7 x 5.2" (15 x 4.3 x 13.2 cm)
• Package Dimensions: 6 x 6 x 2.625 in.
• Shipping Weight: 1.61 lbs