Atlas IED ZC1PRO+ Single Output PoE+ IP Addressable IP-to-Analog Gateway Kit

OUR PART #: ZC1PRO+ MFR #: ZC1PRO+

Copied to clipboard

AtlasIED IP-to-analog gateways are perfect for connecting your unified communication platform to off network analog third party systems, including, but not limited to... ...Read more

Atlas IED ZC1PRO+ Single Output PoE+ IP Addressable IP-to-Analog Gateway Kit Image 1
Atlas IED ZC1PRO+ Single Output PoE+ IP Addressable IP-to-Analog Gateway Kit Image 2
Atlas IED ZC1PRO+ Single Output PoE+ IP Addressable IP-to-Analog Gateway Kit Image 3
Atlas IED ZC1PRO+ Single Output PoE+ IP Addressable IP-to-Analog Gateway Kit
No longer available at Full Compass
We've left this page up for reference only.

Questions? Contact our
Sales and Service Pros for expert
advice and package pricing.

800-356-5844

Email customer service

Product Overview

AtlasIED IP-to-analog gateways are perfect for connecting your unified communication platform to off network analog third party systems, including, but not limited to, sending notifications to analog overhead paging, trigger or be triggered by access-control systems, assist to fire alarm, and two-way audio support for video-surveillance, simply plug and play.

AtlasIED ZCM-V2+ registers as a communication endpoint directly within InformaCast, and SA-Announce Advanced Notification applications, supporting audio broadcast to enhance physical security while improving day-to-day communications through advanced alerting, bell schedules, pre-recorded, & scheduled announcements, while leveraging the WAN/LAN Network Architecture.

When used within a Cisco Environment, these same IP loudspeakers from AtlasIED can join Cisco’s Unified Survivable Remote Site Telephony (SRST) as a supported device within SRST endpoint Architecture. Cisco’s SRST provides remote location call-processing redundancy when access to the centralized Cisco Unified Communications Manager is interrupted because of a WAN outage. The ability of LAN communication between any combination of phones and loudspeakers is particularly critical during an emergency (which may be the actual cause of the WAN outage).

Where 3rd party notification applications are not required, the ZCM-V2+ IP–to–Analog Gateways can register as SIP devices directly to a SIP server or VoIP Communications Manager for critical alerts /public address applications.

The ZC1PRO+ includes the PA702-RMK rack mount kit for use in full width equipment racks.

The ZCMT transformer is included with the AtlasIED ZC1PRO+.

AtlasIED ZC1PRO+ Features:

  • Network Features:
    • Dynamic or Static IP Address
    • IEEE802.3 10/100Base-T Ethernet
    • IEEE 802.1q Tagging
    • IEEE 802.11AT Compliant
    • VoIP Standard Audio: G.711 u-law/a-law (64 kbit/s) or G.729 Wideband Audio (64 kbit/s)
    • Auto Provisioning: DHCP Option 66, 150, or TFTP Server or DHCP Option 72 for HTTP Server
    • Auto Registration: SLP for InformaCast or DHCP Option 72 for SA-Announce or GCK
    • Static Configuration: HTTP GUI for Static Configuration or Cisco SRST
  • Audio Features:
    • Integrated Amplifier 15-Watt Total Power: Primary Speaker Output 8 ohm
    • Aux Audio Line-In Unbalanced (2.8Vpp 10K)
    • Aux Audio Line-Out Unbalanced (2.8Vpp 10K)
  • Additional Features:
    • 2 General Purpose Inputs
    • 1 General Purpose Output (2A @ 30 VDC)
    • Phone/Night Loud Ringer
    • External Power Supply Option

AtlasIED ZC1PRO+ Specifications:

  • Power Rating: 9 Watts RMS into an 8 ohm Load with 12VDC Input
  • Inputs: RJ-45 Female on PCB
  • Outputs: 600 Ohms, 8 Ohms, 25V, or 70.7V
  • Power Source: IEEE 802.3af Compliant POE Network Switches / Local 12VDC - 18VDC PSU
  • Network Control: Multicast Enabled Networks
  • Relay Output: 50V @ 500mA Max
  • Input Minimum: 1mA to Run on 50V Max
  • Rack Units: 1RU
  • Dimensions (HxWxD): 1.75 x 8 x 10" (45 x 203 x 254 mm)

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Product Documents

Click to download