ETS ETS-PA204F InstaSnake PA204F Passive Network Audio Snake, (2) XLR-F + (2) XLR-M to RJ45 Jack

The ETS InstaSnake™ PA204F is a passive network audio snake that features two female XLR sends, two male XLR returns, and one RJ45 ethernet jack. This unit allows you to run audio signals over a single run of CAT5, 5e, 6 or 6a data cables. With a roll of cable, this compact unit is easily transported and/or stored solving dozens of live and recording sound problems.

The InstaSnake is a passive unit, so you do not need power, and it accepts mic or line level analog or digital audio and supports phantom power when using shielded CAT5 or 6 cables. This unit also features bi-directional capability which can be input directly into analog or digital consoles.

Designed to the highest professional standards, the InstaSnake PA204F has a wide, flat frequency response, low THD and residual noise. The InstaSnake has been factory tested to 1900 feet over CAT5 using balanced line low impedance dynamic microphones, and phantom power has been tested to 850 feet over shielded cable, which is required to pass phantom power.

ETS InstaSnake PA204F Features:

• Easily transported
• Expandable - add a second unit to increase the number of channels
• May be used for analog or digital audio - mic or linelevel
• Supports 48V phantom power when using shielded CAT5 cable
• Rugged, road-ready construction
• RoHS Compliant
• USA Made - 100% Tested

ETS InstaSnake PA204F Specifications:

• Crosstalk at 20 kHz:
  • -109dB between Ch. 1 and Ch. 2
  • -102dB between Ch. 1 and Ch. 3
  • -106dB between Ch. 1 and Ch. 4
  • -106dB between Ch. 2 and Ch. 3
  • -106dB between Ch. 2 and Ch. 4
  • -109dB between Ch. 3 and Ch. 4
• Distance:
  • UTP: 1900 ft
  • FTP or STP: 850 ft, phantom power only, female or male XLR to Ethercon RJ45
• Connectors:
  • (2) Female XLR Sends
  • (2) Male XLR Returns
  • (1) RJ45 Ethernet Jack