DB Technologies DVA M2M+M2S 2x6.5" 2-Way Active Line Array Module with Passive Secondary, 400W

The DB Technologies speakers DVA M2M and DVA M2S are part of the modular system called DVA MINI. The system can be used in ground stack configuration or suspended in line-array configuration. The modules use a fast, innovative mechanical fastening method. This series is ideal for installations in theatres, places of worship, convention centres, concerts and live music performances which require medium-high sound pressures and limited weight and footprint.

DVA M2M is equipped with two class D amplifiers series DIGIPRO ® G3, able to drive also the speaker DVA M2S thanks to a simple, easy wiring. The amplifier module is capable of delivering 400W RMS (total), 200W RMS for the bass section and 200W (RMS) for the treble section.

The digital pre-amplifier with Digital Signal Processor (DSP) manages the acoustic components, the frequency response, the limiter and the speaker alerts.

Both speakers are provided with the same acoustic components.

DB Technologies DVA M2M + DVA M2S Specifications:

• TechnicalData
  • Speaker Type M2M: 2-Way Active Primary Line Array Module
  • Speaker Type M2S: 2-Way Secondary Line Array Module
• Acoustical Data
  • Frequency Response [-6dB]: 78 - 19.000 Hz
  • Frequency Response [-10dB]: 68 - 20.000 Hz
  • Max SPL: 126 dB per unit
  • HF: 2 x 1"
  • Type HF: Neodymium
  • LF: 2 x 6.5"
  • Type LF: Neodymium
  • Voice Coil LF: 1.5"
  • Directivity: 90 x 15°
• Amplifier
  • Amp Technology: Digipro® G3
  • Amp Class: Class D
  • RMS Power HF Amp: 200 W (100 W + 100 W)
  • RMS Power LF Amp: 200 W (100 W + 100 W)
  • Cooling: Convection
• Processor
  • Controller: DSP 56 bit
  • AD/DA Converter: 24 bit / 48 kHz
  • System Presets: 9 presets (8x HF and Low-Mid corrections and 1x for service use)
  • Limiter: Multiband, RMS / Peak, Thermal
  • Crossover Frequency LF-HF: 1800 Hz
  • Slope LF-HF: 24 dB / Octave
• Input
  • Signal Input: 1x XLR fem, Bal.
  • Signal Output: 1x XLR male, Bal.
  • Power Supply: 400 W SMPS with PSU Auto-range (110V~ and 220V~)
  • Power Socket: 1x PowerCon In 1x PowerCon Out
  • Signal Input M2S: 1 Custom connector
• Mechanics
  • Housing: Polypropylen PP
  • Handles: 2x back side
  • Fittings: Integrated hardware with fast lock mechanics
  • Splay Angles: 0°- 1,5°- 3°- 4, 5° - 6°- 8°- 10°- 12,5°- 15°
  • Width: 460 mm (18.1 in)
  • Height: 190 mm (7.5 in)
  • Depth: 345 mm (13.6 in)
  • Weight M2M: 7.6 kg (16.8 lbs)
  • Weight M2S: 7.1 kg (15.7 lbs)