(0)

Questions? Call Us:
866-334-8859

Powersoft Advanced Tech M30D-HDSP+ETH
2-Channel Power Amplifier With DSP And Ethernet

OUR PART #  M30D-HDSP+ETH

Our Price: $2,851.00
(Low Price Guarantee)
Usually ships in 7-14 business days.
Need it sooner? Call us!

The PowersoftAudio M30D-HDSP+ETH is a 2-channel power amplifier with DSP and Ethernet for portable and permanently installed applications. Equally versatile in both portable and installed system configurations and with delivering up to 3,000 W out of one single rack unit weighing just over 7 kg / 16 lb, the M30D HDSP+ETH is a highly flexible, cost-effective solution for small to medium sound systems.

The M30D HDSP+ETH provides unparalleled levels of control and monitoring through the Armonía Pro Audio Suite™ software, with the same user interface and on the same network as all Powersoft amplifiers. Locally, the M30D HDSP+ETH lets the user access up to four presets per pushbutton on the rear panel. Furthermore, the high-performance DSP is tucked away inside and safe against accidental or intentional tampering.

Powersoft Audio M30D-HDSP+ETH Features:

  • Driving distributed line systems: Able to drive 70 V/ 100 V distributed lines directly without the need for transformers
  • Direct PC/network connection
  • Four presets on board with selection button
  • Optimized for 4 Ohm loads
  • Fully protected circuit design
  • Temperature controlled continuous variable speed fan,front to rear airflow
  • Recessed stepped level attenuators

Powersoft Audio M30D-HDSP+ETH Specifications:

  • General
    • Number of channels: 2
    • Output Power:
      • 2-Channel Mode
      • 4 Ohms / Ch: 1,500 W
      • 8 Ohms / Ch: 900 W
      • 70 V: 1,200 W
      • 100 V: 1,500 W
    • Max output voltage / current: 135 v peak / 65 A peak
  • AC Mains
    • Power Supply: Universal, regulated switch mode
    • Operating voltage / Inrush current: 115 V / 230 V (factory selection) + / - 15%, 50 Hz - 60 Hz / < 28 ARMS
  • Thermal
    • Environmental operating temperature: 32° - 113° F (0° - 45° C)
    • Thermal dissipation: Fan, continuously variable speed, temperature controlled, front to rear airflow
  • Audio
    • Gain: 32 dB, 30 dB, 28 dB, 26 dB, 24 dB, 22 dB, 20 dB, 18 dB, 14 dB, 4 dB, etc., user selectable
    • Frequency response: 10 Hz - 30 kHz (1 W @ 8 O, + / - 3 dB)
    • S/N ratio (amplifier section): 108 dBA (20 Hz - 20 kHz, A weighted)
    • Crosstalk separation: > 70 dB @ 1 kHz
    • Input sensitivity @ 8 Ohm: 2.13 V / 8.8 dBu
    • Max input level: 6 V / 17.7 dBu
    • Input impedance: 10 kOhms
    • THD+N / SMPTE IMD: </= 0.08 % @ 1/2 of full power
    • DIM100 IMD: typ. < 0.005 % (< 0.02 % @ > 0.1 W)
    • Damping factor @ 8 Ohm: > 5000 @ 100 Hz
  • DSP
    • A/D converter: CS5381, 2 channels, 24 bit / 48 kHz, 120 dB SNR
    • D/A converter: CS4398, 2 channels, 24 bit / 48 kHz, 120 dB SNR
    • Frequency response @ -3 dB: 7 Hz - 22 kHz
    • THD: < 0.01% (20 Hz - 20 kHz)
    • Presets: Bank of 4 presets, management and upload via Armonía Pro Audio Suite
    • Delay for time alignment: 10 ms per output
    • Crossover filters: Butterworth, Linkwitz-Riley, Bessel, 6 dB / oct to 48 dB / oct
    • Output equalizer: up to 12 biquad fully parametric per channel: peaking, hi/lo shelving, hi/lo pass, band pass, band stop, all pass.
    • Input equalizer: up to 5 biquad filters (PEQ, shelving, band pass, band stop, all pass)
      Limiters: Peak limiter, RMS limiter, frequency dependent RMS limiter
    • Damping control: < 120 Hz, range +/- 2 Ohm
    • System Delay: up to 170 ms for 2 IN / 2 OUT or 340 ms for 1 IN / 2 OUT
  • Front Panel
    • Indicators:
      • 4 LEDs per channel: 3 x green, 1 x red
      • 2 status LEDs: 1 x green, 1 x yellow
    • Controls: 1 stepped level attenuator pot per channel; mains switch
    • Maintenance: Dust filter foam behind front panel
  • Rear Panel
    • Audio signal input connectors: (2) balanced Neutrik® XLR female
    • Loudspeaker output connectors: (2) Neutrik® Speakon NL4MD, 2 x Neutrik® XLR male hard-wired to the corresponding input
    • Network data port Ethernet: (1) RJ45 with activity LED with 2 rotary address switches
    • DSP preset selection: (1) Pushbutton (stepping through bank of 4 presets); 1 x 4 LED preset indicators
    • Aux voltage 1 x 2-pin Phoenix type MC 1.5/2-ST-3.81
    • AC mains: IEC C13 16 A connector; AC mains cord with 3-pin plug 15 A for US, IEC Schuko 16 A for every other nation
    • Controls: (1) link switch, linking analog inputs 1 and 2
  • Construction
    • Dimensions (W x H x D): 19" x 1.75" x 14" (483 x 44.5 x 358 mm)
    • Chassis: 1 mm (0.04”) steel chassis and steel removable dust cover, 3 mm (0.12”) steel front panel, screw hole protection, steel side reinforcement & rear support
    • Weight: 16 lb (7.3 kg)

Powersoft Advanced Tech M30D-HDSP+ETH
2-Channel Power Amplifier With DSP And Ethernet

OUR PART #  M30D-HDSP+ETH

Product Information:

The PowersoftAudio M30D-HDSP+ETH is a 2-channel power amplifier with DSP and Ethernet for portable and permanently installed applications. Equally versatile in both portable and installed system configurations and with delivering up to 3,000 W out of one single rack unit weighing just over 7 kg / 16 lb, the M30D HDSP+ETH is a highly flexible, cost-effective solution for small to medium sound systems.

The M30D HDSP+ETH provides unparalleled levels of control and monitoring through the Armonía Pro Audio Suite™ software, with the same user interface and on the same network as all Powersoft amplifiers. Locally, the M30D HDSP+ETH lets the user access up to four presets per pushbutton on the rear panel. Furthermore, the high-performance DSP is tucked away inside and safe against accidental or intentional tampering.

Powersoft Audio M30D-HDSP+ETH Features:

  • Driving distributed line systems: Able to drive 70 V/ 100 V distributed lines directly without the need for transformers
  • Direct PC/network connection
  • Four presets on board with selection button
  • Optimized for 4 Ohm loads
  • Fully protected circuit design
  • Temperature controlled continuous variable speed fan,front to rear airflow
  • Recessed stepped level attenuators

Powersoft Audio M30D-HDSP+ETH Specifications:

  • General
    • Number of channels: 2
    • Output Power:
      • 2-Channel Mode
      • 4 Ohms / Ch: 1,500 W
      • 8 Ohms / Ch: 900 W
      • 70 V: 1,200 W
      • 100 V: 1,500 W
    • Max output voltage / current: 135 v peak / 65 A peak
  • AC Mains
    • Power Supply: Universal, regulated switch mode
    • Operating voltage / Inrush current: 115 V / 230 V (factory selection) + / - 15%, 50 Hz - 60 Hz / < 28 ARMS
  • Thermal
    • Environmental operating temperature: 32° - 113° F (0° - 45° C)
    • Thermal dissipation: Fan, continuously variable speed, temperature controlled, front to rear airflow
  • Audio
    • Gain: 32 dB, 30 dB, 28 dB, 26 dB, 24 dB, 22 dB, 20 dB, 18 dB, 14 dB, 4 dB, etc., user selectable
    • Frequency response: 10 Hz - 30 kHz (1 W @ 8 O, + / - 3 dB)
    • S/N ratio (amplifier section): 108 dBA (20 Hz - 20 kHz, A weighted)
    • Crosstalk separation: > 70 dB @ 1 kHz
    • Input sensitivity @ 8 Ohm: 2.13 V / 8.8 dBu
    • Max input level: 6 V / 17.7 dBu
    • Input impedance: 10 kOhms
    • THD+N / SMPTE IMD: </= 0.08 % @ 1/2 of full power
    • DIM100 IMD: typ. < 0.005 % (< 0.02 % @ > 0.1 W)
    • Damping factor @ 8 Ohm: > 5000 @ 100 Hz
  • DSP
    • A/D converter: CS5381, 2 channels, 24 bit / 48 kHz, 120 dB SNR
    • D/A converter: CS4398, 2 channels, 24 bit / 48 kHz, 120 dB SNR
    • Frequency response @ -3 dB: 7 Hz - 22 kHz
    • THD: < 0.01% (20 Hz - 20 kHz)
    • Presets: Bank of 4 presets, management and upload via Armonía Pro Audio Suite
    • Delay for time alignment: 10 ms per output
    • Crossover filters: Butterworth, Linkwitz-Riley, Bessel, 6 dB / oct to 48 dB / oct
    • Output equalizer: up to 12 biquad fully parametric per channel: peaking, hi/lo shelving, hi/lo pass, band pass, band stop, all pass.
    • Input equalizer: up to 5 biquad filters (PEQ, shelving, band pass, band stop, all pass)
      Limiters: Peak limiter, RMS limiter, frequency dependent RMS limiter
    • Damping control: < 120 Hz, range +/- 2 Ohm
    • System Delay: up to 170 ms for 2 IN / 2 OUT or 340 ms for 1 IN / 2 OUT
  • Front Panel
    • Indicators:
      • 4 LEDs per channel: 3 x green, 1 x red
      • 2 status LEDs: 1 x green, 1 x yellow
    • Controls: 1 stepped level attenuator pot per channel; mains switch
    • Maintenance: Dust filter foam behind front panel
  • Rear Panel
    • Audio signal input connectors: (2) balanced Neutrik® XLR female
    • Loudspeaker output connectors: (2) Neutrik® Speakon NL4MD, 2 x Neutrik® XLR male hard-wired to the corresponding input
    • Network data port Ethernet: (1) RJ45 with activity LED with 2 rotary address switches
    • DSP preset selection: (1) Pushbutton (stepping through bank of 4 presets); 1 x 4 LED preset indicators
    • Aux voltage 1 x 2-pin Phoenix type MC 1.5/2-ST-3.81
    • AC mains: IEC C13 16 A connector; AC mains cord with 3-pin plug 15 A for US, IEC Schuko 16 A for every other nation
    • Controls: (1) link switch, linking analog inputs 1 and 2
  • Construction
    • Dimensions (W x H x D): 19" x 1.75" x 14" (483 x 44.5 x 358 mm)
    • Chassis: 1 mm (0.04”) steel chassis and steel removable dust cover, 3 mm (0.12”) steel front panel, screw hole protection, steel side reinforcement & rear support
    • Weight: 16 lb (7.3 kg)
Add to Cart

We're sorry, only of this item available



Call a Sales Pro at 800-356-5844 for more information

© 2016 Full Compass Systems, LTD  9770 Silicon Prairie Parkway, Madison, WI 53593  All rights reserved.

We are not responsible for typographical errors in pricing or product specification
inaccuracies in our catalog or web site. Prices are subject to change without notice.