Digital System Controller

OUR PART #  SC-28-RST-01

Sale Price: $885.37
List Price: $1,480.00
You save 40%! (Low Price Guarantee)
In Stock

The SC28 is a 2-input, 8-output digital system controller containing pre-programmed tunings for QSC loudspeaker systems. In addition to the preset tunings, the SC28 also offers user-adjustable equalization and delay.

Audio inputs and outputs are via balanced, line-level, analog XLR connectors. Four outputs for each of the two inputs are provided for use with 2 or 3-way systems plus subwoofers.  Simple to operate, yet uncompromised in audio quality, the SC28 uses 48 kHz, 24-bit A/D and D/A conversion with 32-bit, floating point DSP for wide dynamic range and low distortion. Advanced DSP is capable of implementing tunings that incorporate IIR (Infinite Impulse Response) as well as FIR (Finite Impulse Response) filters.

NOTE: This is a RESTOCK item that has had its box opened or has been repackaged. It may have minor cosmetic flaws and may have been sold to a customer and returned. Please contact your Sales Pro for more information on this and other products.

QSC system engineers have employed the power of the SC28's FIR (finite impulse response) filters to implement "Intrinsic Correction™" of the loudspeaker. The goal of Intrinsic Correction™ is to provide a drive signal to the amplifiers and loudspeakers that will result in the most accurate acoustical magnitude, frequency and phase domain performance possible. When properly implemented, Intrinsic Correction™ can compensate for many causal phenomena such as the effects of waveguide acoustical impedance and loudspeaker cone resonance. The result is a loudspeaker system with excellent power response and extremely natural, uncolored sound across its frequency band and coverage area. An array of loudspeakers with Intrinsic Correction™ tunings will also be very responsive to the use of equalization to compensate for array configuration, acoustical conditions or user preferences.

Selection of tunings is accomplished by simply scrolling through a list of QSC loudspeakers and selecting the configuration on the LCD panel. A similar process is used to select the QSC amplifiers being used and to configure amplifier input sensitivity for proper dynamic protection gain structure. Settings for new QSC products may be loaded into the SC28 via a rear-mounted USB port.

Once the processor settings have been matched to the system, the user or installer can take advantage of an integral, 6-band parametric equalizer, high and low shelving filters and signal delay to optimize for acoustic, environmental or aesthetic considerations. Password protection is included to prevent unauthorized tampering. The SC28 is easy to use and delivers superb audio performance at a very affordable price.

QSC SC28 Processor Specifications:

  • Dynamic Range (AES-17, -60 dB Method, all sensitivities):
    Unweighted:> 104dB
    A weighted; > 107dB
  • Input Impedance:
    Unbalanced (nominal): 69k ohms
    Balanced (nominal): 11k ohms
  • Common Mode Rejection:
    20 Hz - 20 kHz (min): > 75 dB
    20 Hz - 20 kHz (typ): > 80 dB
  • Input Sensitivities:
    Vrms: 1.5V, 3V, 9V, 18V
    dBU: 5.7, 11.8, 21.3,27.3
    dBV: 3.5, 9.5, 19.1, 25.1
  • Distortion (AES-17, 20 Hz - 20 kHz, all sensitivities):
    +4 dBu: <0.006 THD+N
    2 dB below clip (max): < 0.006 THD+N
  • Crosstalk (20 Hz – 20 kHz):
    Inter-channel (max): > 75 dB
  • Frequency Response: +/- 0.1dB from target response
  • Audio Converters: 24 bit, 48k Hz
  • Mute: Infinite Attenuation
  • Throughput Delay: 1.4125 milliseconds (A/D – DSP - D/A)
  • Program Inputs: 2
      Connector Type: XLR female, locking
     Type: Electronically balanced
      Grounding: All shield terminalsconnected to chassis
      Pinout: 1: (GND) 2: (+), 3: (-)
  • Program Outputs: 8
      Connector Type: XLR Male
      Type:Electronically Balanced
      Grounding: All shield terminals connected tochassis
      Pinout: 1: (GND) 2: (+), 3: (-)
  • Controls: Rotary encoder knob with push-to-selectfunction
  • Indicators:
      Power: Blue, front panel
      LCD Data Display:2 lines 16 character, backlit, front panel
      Input/OutputMeters: Green, Yellow, Red, front panel
  • USB Port: USB type “B”
  • AC Power Requirements: 100-240 VAC, 50-60 Hz, no useradjustment required
  • AC Power Connection: IEC-type inlet
  • AC Power Cord: 2 meters long, #18AWG
  • Dimensions: 1.73" (1 RU) H x 18.94"W x 6.67"D (44 mm x481 mm x 169 mm)
  • Weight: 4.5 lbs. (2 kg)
Add to Cart

We're sorry, only of this item available

Call a Sales Pro at 800-356-5844 for more information

© 2016 Full Compass Systems, LTD  9770 Silicon Prairie Parkway, Madison, WI 53593  All rights reserved.

We are not responsible for typographical errors in pricing or product specification
inaccuracies in our catalog or web site. Prices are subject to change without notice.