ETC S4WRD-A LED Retrofit Module for Source Four Fixtures with Edison Connector

OUR PART #: S4WRD-A MFR #: 7067A1100-A

Copied to clipboard
ETC S4WRD-A LED Retrofit Module For Source Four Fixtures With Edison Connector Image 1
tQ2tgDjXZKY
2 Videos
ETC S4WRD-A LED Retrofit Module For Source Four Fixtures With Edison Connector
No longer available at Full Compass
We've left this page up for reference only.

Questions? Contact our
Sales and Service Pros for expert
advice and package pricing.

800-356-5844

Email customer service

Product Overview

The ETC Source 4WRD (Watt Reduction Device) LED is a replacement for a standard Source Four® burner assembly that will convert the HPL source to a white-light LED and provides a significant reduction in power consumption. The simple and quick upgrade is nondestructive and takes less than a minute (in most cases it can even be done without breaking the fixture's focus). Source 4WRD LED is theatrically dimmable via DMX or line dimmable, with a traditional LED curve, to allow flexibility for your installation. And, because it is an LED source, your fixtures will run cool and efficiently without lamp replacements. This model is terminated with an Edison connector.

Features

  • Easy LED Retrofit with Edison connector
  • Designed to turn any Source Four incandescent fixture into an LED fixture
  • Available in both 3000K and 5600K color temperatures
  • Output is as bright or brighter than a 575-watt extended life HPL lamp
  • LED means lower energy bills, low heat emission, and no more lamp replacement

ETC Source 4WRD Specifications:

  • Physical:
    • Rugged, die cast aluminum construction
    • Can be fitted to any Source Four fixture body (not for Source Four Par/nel, Fresnel, or jr.)
    • Seven segment display for simple DMX setup
    • Two button user interface
    • Easy mounting with single screw attachment
    • Replaces Source Four burner assembly
    • IP20 rating for indoor use only
    • UL and cUL Listed: UL1598C
  • Electrical:
    • 114-125V, 60 Hz
    • 155 Watt draw at full (182 Watt theoretical max draw)
    • 30,000 hour L70 rating (ETC estimate)
    • DMX in and thru via RJ45 connector (DMX is not self-terminating)
    • AC and DMX dimmable
    • Two fixtures per circuit (D20 module) when using AC dimming
    • 14 fixtures per non-dim circuit (R20 module) when using DMX dimming
    • Inrush: 30A (first half-cycle) at 120V
  • Typical Power Consumption at 120V:
    • Idle Power / Current: DMX Mode: 1.2W/0.046A, AC Mode: 0W
    • Full Intensity Power / Current: 155.7W/1.35A
  • Optical:
    • Tool free field adjustment
    • LED lamp consisting of four CREE LED modules (LED lamp is fragile and should not be touched)
    • 3000K, 80CRI output
    • Uses the Source Four ellipsoidal's existing reflector and optical system
  • Thermal:
    • 41°F to 104°F operating range (5°C to 40°C) (Fixture must be above freezing temperatures for one hour before being energized)
    • Quiet fan cooling
    • Fixture is designed for continuous operation up to 104°F (40°C) ambient temperature and requires free flow of air around fixture housing

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Product Videos