Crestron DM-RMC-4K-100-C-1G Wall Plate 4K DigitalMedia 8G+® Receiver & Room Controller 100

OUR PART #: DM-RMC-4K-100-C-1G MFR #: 6505627

Copied to clipboard

A simple, cost-effective interface solution for a single display device... ...Read more

Crestron DM-RMC-4K-100-C-1G Wall Plate 4K DigitalMedia 8G+® Receiver & Room Controller 100 Image 1
Crestron DM-RMC-4K-100-C-1G Wall Plate 4K DigitalMedia 8G+® Receiver & Room Controller 100 Image 2
Crestron DM-RMC-4K-100-C-1G Wall Plate 4K DigitalMedia 8G+® Receiver & Room Controller 100 Image 3
Crestron DM-RMC-4K-100-C-1G Wall Plate 4K DigitalMedia 8G+® Receiver & Room Controller 100
Selected Model Price: $848.00
Synchrony Music & Sound Card
No Interest if paid in full within 6 Months
Learn How
(shipping times are approximate)

Questions? Contact our
Sales and Service Pros for expert
advice and package pricing.

800-356-5844

Email customer service

Accessories

Product Overview

A simple, cost-effective interface solution for a single display device, the Crestron DM-RMC-4K-100-C-1G is a wall plate digital media receiver + room controller that's designed to be part of a complete Crestron® DigitalMedia™ system (sold separately). Functioning as a DM 8G+® receiver and control interface, it provides a single HDMI® output plus RS-232 and IR control ports¹. Along with the DM 8G+, it supports HDBaseT®, for direct connection to an HDBaseT certified source. The 1-gang mountable design lets the DM-RMC-4K-100-C-1G be flush-mounted behind a flat panel display or above a ceiling-mounted projector. Additionally, using the included mounting bracket, it can be mounted beneath a table or attached to a suitable flat surface. It connects to the head end or source location using a single CAT type twisted pair cable². Standard gang-box mounting allows for installation adjacent to an Ethernet jack (Crestron MP-WP183 or equivalent) for a total connectivity solution³.

¹ The IR and RS-232 (COM) ports are only enabled when the DM-RMC-4K-100-C-1G is connected to an Ethernet-enabled DM transmitter or switcher that is addressable from a Crestron control system. When connected to a DM switcher, the switcher must be in private network mode.

² The maximum cable length for DigitalMedia 8G+ (DM 8G+) or HDBaseT is dependent upon the type of cable and resolution of the video signal. Refer to the “Maximum Cable Lengths” table for a detailed overview. Crestron legacy cable models DM-CBL DigitalMedia Cable and DM-CBL-D DigitalMedia D Cable support the same resolutions and cable lengths as CAT5e. Shielded cable and connectors are recommended to safeguard against unpredictable environmental electrical noise which may impact performance at resolutions above 1080p. Refer to the Crestron DigitalMedia Design Guide, Doc. #4546 for complete system design guidelines. DM 8G+ is compatible with HDBaseT Alliance specifications for connecting to HDBaseT compliant equipment. All wire and cables are sold separately.

³ The DM-RMC-4K-100-C-1G does not include an Ethernet port. Local Ethernet connectivity for external devices requires a MP-WP183 or equivalent Ethernet jack with a dedicated LAN connection.

Crestron DM-RMC-4K-100-C-1G Summary Of Features:

  • Cost-effective DigitalMedia 8G+® receiver and display controller
  • Connects to a DM® switcher or transmitter over a single CAT type twisted pair cable */†
  • HDBaseT® Certified — Enables direct connection to other HDBaseT certified equipment
  • Provides one HDMI® or DVI display output¹
  • Handles video resolutions up to 4K and Ultra HD
  • Handles 3D video and Deep Color
  • Handles Dolby® TrueHD, DTS-HD®, and uncompressed 7.1 linear PCM audio
  • HDCP 2.2 compliant
  • Supports cable lengths up to 330 ft (100 m) for all resolutions up to UHD and 4K using DM Ultra cable†
  • Supports cable lengths up to 330 ft (100 m) for 1080p, WUXGA, and 2K using DM 8G® cable or CAT5e†
  • Supports cable lengths up to 230 ft (70 m) for UHD and 4K using DM 8G cable, or 165 ft (50 m) using CAT5e†
  • Enables device control via CEC, IR, and RS-232*/³
  • Powered via the DM connection or local power pack (included)²
  • 1-gang wall box mount design
  • Surface mount bracket included
  • Faceplate available separately
  • Available in white or black finish
  • Notes:
  • * The IR and RS-232 (COM) ports are only enabled when the DM-RMC-4K-100-C-1G is connected to an Ethernet-enabled DM transmitter or switcher that is addressable from a Crestron control system. When connected to a DM switcher, the switcher must be in private network mode.
  • † The maximum cable length for DigitalMedia 8G+ (DM 8G+) or HDBaseT is dependent upon the type of cable and resolution of the video signal. Refer to the “Maximum Cable Lengths” table for a detailed overview. Crestron legacy cable models DM-CBL DigitalMedia Cable and DM-CBL-D DigitalMedia D Cable support the same resolutions and cable lengths as CAT5e. Shielded cable and connectors are recommended to safeguard against unpredictable environmental electrical noise which may impact performance at resolutions above 1080p. Refer to the Crestron DigitalMedia Design Guide, Doc. #4546 for complete system design guidelines. DM 8G+ is compatible with HDBaseT Alliance specifications for connecting to HDBaseT compliant equipment. All wire and cables are sold separately.
  • ¹ The HDMI output requires an appropriate adapter or interface cable to accommodate a DVI signal. CBL-HD-DVI interface cables are available separately.
  • ² Receiving Power over DM (PoDM) or Power over HDBaseT (PoH) requires connection to a switcher or other equipment that has a PoDM or PoH PSE (Power Sourcing Equipment) port. Any wiring that is connected to a PoDM or PoH PSE port is for intra-building use only and should not be connected to a line that runs outside of the building in which the PSE is located.
  • ³ Supports simple pass-through of CEC when connected directly to a DM-TX-4K-100-C-1G transmitter. Supports full management of CEC between the locally connected HDMI device and a control system when connected to an Ethernet-enabled 4K DM transmitter or switcher that supports CEC over HDBaseT. Refer to the spec sheet for each DM transmitter, switcher, output card, or output blade to verify “CEC” is listed under “HDBaseT” in the “Communications” section of the product’s specifications.

Crestron DM-RMC-4K-100-C-1G Specifications:

  • Maximum Cable Lengths
    • Resolution:
      • 1080p60 Full HD:
        • DM-CBL-ULTRA DigitalMedia™ Ultra Cable: 330 ft (100 m)
        • DM-CBL-8G DigitalMedia 8G™ Cable: 330 ft (100 m)
        • CAT5e (or better) UTP or STP*: 330 ft (100 m)
      • 1920x1200 WUXGA:
        • DM-CBL-ULTRA DigitalMedia™ Ultra Cable: 330 ft (100 m)
        • DM-CBL-8G DigitalMedia 8G™ Cable: 330 ft (100 m)
        • CAT5e (or better) UTP or STP*: 330 ft (100 m)
      • 1600x1200 UXGA:
        • DM-CBL-ULTRA DigitalMedia™ Ultra Cable: 330 ft (100 m)
        • DM-CBL-8G DigitalMedia 8G™ Cable: 330 ft (100 m)
        • CAT5e (or better) UTP or STP*: 330 ft (100 m)
      • 2048x1080 2K DCI:
        • DM-CBL-ULTRA DigitalMedia™ Ultra Cable: 330 ft (100 m)
        • DM-CBL-8G DigitalMedia 8G™ Cable: 330 ft (100 m)
        • CAT5e (or better) UTP or STP*: 330 ft (100 m)
      • 2560x1440 WQHD:
        • DM-CBL-ULTRA DigitalMedia™ Ultra Cable: 330 ft (100 m)
        • DM-CBL-8G DigitalMedia 8G™ Cable: 230 ft (70 m)
        • CAT5e (or better) UTP or STP*: 165 ft (50 m)
      • 2560x1600 WQXGA:
        • DM-CBL-ULTRA DigitalMedia™ Ultra Cable: 330 ft (100 m)
        • DM-CBL-8G DigitalMedia 8G™ Cable: 230 ft (70 m)
        • CAT5e (or better) UTP or STP*: 165 ft (50 m)
      • 3840x2160 Ultra HD:
        • DM-CBL-ULTRA DigitalMedia™ Ultra Cable: 330 ft (100 m)
        • DM-CBL-8G DigitalMedia 8G™ Cable: 230 ft (70 m)
        • CAT5e (or better) UTP or STP*: 165 ft (50 m)
      • 4096x2160 4K DCI:
      • DM-CBL-ULTRA DigitalMedia™ Ultra Cable: 330 ft (100 m)
      • DM-CBL-8G DigitalMedia 8G™ Cable: 230 ft (70 m)
      • CAT5e (or better) UTP or STP*: 165 ft (50 m)
    • Notes:
  • * The maximum cable length for DigitalMedia 8G+ (DM 8G+) or HDBaseT is dependent upon the type of cable and resolution of the video signal. Refer to the “Maximum Cable Lengths” table for a detailed overview. Crestron legacy cable models DM-CBL DigitalMedia Cable and DM-CBL-D DigitalMedia D Cable support the same resolutions and cable lengths as CAT5e. Shielded cable and connectors are recommended to safeguard against unpredictable environmental electrical noise which may impact performance at resolutions above 1080p. Refer to the Crestron DigitalMedia Design Guide, Doc. #4546 for complete system design guidelines. DM 8G+ is compatible with HDBaseT Alliance specifications for connecting to HDBaseT compliant equipment. All wire and cables are sold separately.
  • Video
    • Input Signal Types: DM 8G+® & HDBaseT® w/Deep Color, 3D, & 4K
    • Output Signal Types: HDMI® w/Deep Color, 3D, & 4K (DVI compatible*)
    • Maximum Resolutions: Scan Type Resolution Frame Rate Color Sampling Color Depth
    • Progressive: 4096x2160 4K DCI
  • * The HDMI output requires an appropriate adapter or interface cable to accommodate a DVI signal. CBL-HD-DVI interface cables are available separately.
  • Audio
    • Input Signal Types: DM 8G+, HDBaseT
    • Output Signal Type: HDMI
    • Formats: Dolby Digital®, Dolby Digital EX, Dolby Digital Plus, Dolby® TrueHD, DTS®, DTS-ES, DTS 96/24, DTS-HD High Res, DTS-HD Master Audio™, LPCM up to 8 channels
  • Communications
    • RS-232: 2-way device control and monitoring up to 115.2k baud with software handshaking*
    • IR/Serial: 1-way device control via infrared up to 1.1 MHz or serial TTL/RS-232 (0-5 Volts) up to 19.2k baud*
    • DigitalMedia: DM 8G+, HDCP 2.2, EDID, CEC**, PoDM
    • HDBaseT: HDCP 2.2, EDID, CEC**, PoH
    • HDMI: HDCP 2.2, EDID, CEC**
  • Notes:
  • * The IR and RS-232 (COM) ports are only enabled when the DM-RMC-4K-100-C-1G is connected to an Ethernet-enabled DM transmitter or switcher that is addressable from a Crestron control system. When connected to a DM switcher, the switcher must be in private network mode.
  • ** Supports simple pass-through of CEC when connected directly to a DM-TX-4K-100-C-1G transmitter. Supports full management of CEC between the locally connected HDMI device and a control system when connected to an Ethernet-enabled 4K DM transmitter or switcher that supports CEC over HDBaseT. Refer to the spec sheet for each DM transmitter, switcher, output card, or output blade to verify “CEC” is listed under “HDBaseT” in the “Communications” section of the product’s specifications.
  • Connectors – Front
    • HDMI OUT:
      • (1) 19-pin Type A HDMI female
      • HDMI digital video/audio output
      • Also supports DVI*
    • IR OUT:
      • (1) 2-pin 3.5mm detachable terminal block, IR/Serial port**
      • IR output up to 1.1 MHz
      • 1-way serial TTL/RS-232 (0-5 Volts) up to 19200 baud
    • COM:
    • (1) 3-pin 3.5mm detachable terminal block, bidirectional RS-232 port**
    • Up to 115.2k baud, software handshaking support
  • Notes:
  • * The HDMI output requires an appropriate adapter or interface cable to accommodate a DVI signal. CBL-HD-DVI interface cables are available separately.
  • ** The IR and RS-232 (COM) ports are only enabled when the DM-RMC-4K-100-C-1G is connected to an Ethernet-enabled DM transmitter or switcher that is addressable from a Crestron control system. When connected to a DM switcher, the switcher must be in private network mode.
  • Connectors – Rear
    • G: (1) 6-32 screw, chassis ground lug
    • DM IN:
      • (1) 8-pin RJ45 female, shielded
      • DM 8G+ input, HDBaseT compliant
      • PoDM and PoH PD (Powered Device) port*
      • Connects to the DM 8G+ output of a DM switcher, transmitter, or other DM device, or to an HDBaseT device, via CAT5e, Crestron DM-CBL-8G, or Crestron DM-CBL-ULTRA cable**
    • 24VDC 0.75A:
    • (1) 2-pin 3.5mm detachable terminal block
    • 24 Volt DC power input
    • PW-2407WUL power pack included
  • Notes:
  • * Receiving Power over DM (PoDM) or Power over HDBaseT (PoH) requires connection to a switcher or other equipment that has a PoDM or PoH PSE (Power Sourcing Equipment) port. Any wiring that is connected to a PoDM or PoH PSE port is for intra-building use only and should not be connected to a line that runs outside of the building in which the PSE is located.
  • ** The maximum cable length for DigitalMedia 8G+ (DM 8G+) or HDBaseT is dependent upon the type of cable and resolution of the video signal. Refer to the “Maximum Cable Lengths” table for a detailed overview. Crestron legacy cable models DM-CBL DigitalMedia Cable and DM-CBL-D DigitalMedia D Cable support the same resolutions and cable lengths as CAT5e. Shielded cable and connectors are recommended to safeguard against unpredictable environmental electrical noise which may impact performance at resolutions above 1080p. Refer to the Crestron DigitalMedia Design Guide, Doc. #4546 for complete system design guidelines. DM 8G+ is compatible with HDBaseT Alliance specifications for connecting to HDBaseT compliant equipment. All wire and cables are sold separately.
  • Indicators
    • PWR: (1) green LED, indicates operating power supplied via PoDM, PoH, or local power pack
    • VIDEO: (1) green LED, indicates video signal presence at the HDMI output
    • DM IN (rear): (2) LEDs, green LED indicates DM link status, amber LED indicates video and HDCP signal presence
  • Power Requirements
    • Power Pack:
      • 0.75 Amps @ 24 Volts DC;
      • 100-240 Volts AC, 50/60 Hz power pack, model PW-2407WUL included
    • Power over DM (PoDM):
      • PoDM PD (Powered Device), capable of being powered by a PoDM PSE (Power Sourcing Equipment), conforms to IEEE 802.3af (802.3at Type 1) Class 3 (12.95W)*
    • Power over HDBaseT (PoH): PoH PD (Powered Device), capable of being powered by a PoH PSE (Power Sourcing Equipment), conforms to IEEE 802.3af (802.3at Type 1) Class 3 (12.95W)*
    • Power Consumption:
    • 5.8 Watts typical
    • 2.5 Watts idle
  • Notes:
  • * References to the IEEE 802.3af and 802.3at standards are used to demonstrate that PoDM and PoH technology is similar in function to PoE and follows the same essential specifications. The DM-RMC-4K-100-C-1G cannot be powered over Ethernet, and its DM IN port should not be connected directly to an Ethernet network or device.
  • Environmental
    • Temperature:32° to 104°F (0° to 40°C)
    • Humidity: 10% to 90% RH (non-condensing)
    • Heat Dissipation: 19.8 BTU/hr
  • Enclosure
    • Construction: Metal, black finish with white or black polycarbonate label overlay
    • Flush Wall Mount: 1-gang mountable in an extra-deep electrical box (3-1/2 inch deep minimum), requires a decorator style faceplate (not included)
    • Surface Mount: Surface mount bracket included
    • Rack Mount: Attachable to a single 19-inch EIA rack rail
  • Physical
    • Dimensions: 4.12" H x 1.72" W x 2.35" D (105 x 44 x 60mm)
    • Weight: 6.3 oz (179 g)

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Product Documents

Click to download