Product Overview
A linear outdoor-rated LED video fixture made for the rental market, the Martin Professional VDO Sceptron™ 10 [1000] features a 10mm pixel pitch and a wide range of optical accessories offering a wide variety of looks. Driven by the Martin P3 System Controller family for easy configuration, mapping and setup, it's also backwards compatible with DMX for smaller setups. Integrated power and data cabling allows for long daisy-chains with many fixtures per cable-run, with flexibility in power supply placement (backstage/up to 50m away) giving a clean setup, and avoiding several driver boxes and messy cabling. This is the 1000mm (12.6") version.
The VDO Sceptron 10 offers brightness, as well as easy setup, mapping and configuration, plus full calibration for optimal consistency.
Approvals
- EU safety: EN 60950-1, EN 60950-22, EN 62471
- EU EMC: EN 55032, EN 55024
- US safety (pending): UL 60950-1, UL 60950-22
- US EMC: FCC Part 15 Class A
- Canadian safety (pending): CSA C22.2 No. 60950-1, No. 60950-22
- Canadian EMC: ICES-003 Class A
- Australia/NZ: C-Tick N4241
Martin Professional VDO Sceptron 10 [1000] Features:
- 1000mm Length
- 10mm Pixel Pitch
- 250 cd per meter calibrated
- 750 lumen per meter calibrated
- High-quality 16-bit per color image processing technology
- Pixel-level brightness and color calibration for optimal image quality
- P3/DMX controllable (automatic protocol detection)
- Intuitive mapping and addressing via P3 System Controller
- Combined power/data input (single cable for power and data input)
- Supported by integrated power and data processor (P3 PowerPort 1500 or P3PowerPort 1000 IP) and simple cabling system
Martin Professional VDO Sceptron 10 [1000] Specifications:
- Manufacturer. Part #: 90357655
- Physical
- Length: 1000mm (39.4") version
- Width: 27mm (1.07")
- Height: 28mm (1.10")
- Weight: 1.2 kg / m (0.81 lbs. per foot)
- Control and Programming
- Control options: Martin P3™ System Controller via Martin P3™ PowerPort 1500 / Martin P3™ PowerPort 1000 IP, and/or DMX
- Protocol detection: Automatic
- Control modes: RGB, basic, segment, and pixel-level
- Setting and addressing: P3 System Controller or RDM-compliant controller
- Control resolution: 16-bit (P3) or 8-bit (DMX) control of each color
- Color and intensity calibration: Pixel-level
- DMX channels: 3/10/13/22/103/307
- DMX compliance: USITT DMX512-A
- RDM compliance: ANSI/ESTA E1.20
- Firmware update: Via Martin P3™ System Controller
- Control/User Interface
- Device status: Multi-color visual indication
- Device test and reset: Magnetic pushbutton to call up local test patterns and reset device
- Optics
- Options*:
- Open Front
- Flat Diffuser
- Flat Smoked Diffuser
- Round Diffuser
- Round Smoked Diffuser
- Square Diffuser
- Square Smoked Diffuser
- Tube Diffuser
- Tube Smoked Diffuser
- *All options can be interchanged at any time. Sold separately.
- Minimum LED lifetime: 50 000 hours (to >70% luminous output)**
- **Figure obtained under manufacturer’s test conditions.
- Photometric Data
- Color resolution: 16-bits per color (48-bits per pixel)
- Viewing angle: 120° x 120°
- Pixels per meter: 100
- Pitch (pixel center-to-center): 10.00mm
- Luminous intensity, calibrated mode: 250 cd per meter*
- Total output, calibrated mode: 8 333 nits (modules spaced 30mm center-to-center)*
- Total output, calibrated mode:750 lumens per meter*
- *Preliminary data, figures are approximate.
- Video Processing
- Brightness control
- Gamma correction and control
- Color temperature control
- Color space control
- Calibration processing
- Synchronization
- Signal Protocol
- Martin P3 (via Martin P3™ PowerPort) or DMX
- Construction
- Base: Extruded aluminum profile
- Color: Matt black
- Protection rating: IP65
- RoHS compliant
- Installation
- Orientation: Any
- Mounting: Slot for locking nuts on back of profile (M6) and optional sliding bracket for M12 bolt
- Mounting options: Flat surface at any angle, pedestal or other suitable support
- Connections
- Power and Data Input: 6-pin Custom (BBD) IP66-rated
- Power and Data Thru: 6-pin Custom (BBD) IP66-rated
- Electrical
- Nominal Input Voltage: 48 VDC +/- 4%
- Power Supply Options: Martin P3™ PowerPort 1500, P3™ PowerPort 1000 IP, Tripix™ Power or generic 48 VDC PSU
- Total Power Consumption (at max. intensity, full white): 33 W per meter
- Thermal
- Cooling: Convection
- Maximum Ambient Temperature (Ta max.): 55° C (113° F)
- Minimum Ambient Temperature (Ta min.): -20° C (-4° F)
- Total Heat Dissipation (calculated, +/- 10%): 115 BTU/hr permeter
NOTE:
This unit ships with a white square diffuser (shown). Other diffusers and accessories available separately. Contact your Sales Pro for more information.
