DPA MMP-C Compact Mic Preamplifier

DPA Microphones' d:dictate™ MMP-C is an ultra-compact microphone preamp with active drive for impedance balancing, and a slightly softer character than the other preamps in the DPA d:dictate™ Recording Microphones series. The MMP-C can be combined with any capsule in DPA's d:dictate™ series.

DPA Microphones MMP-C Specifications:

• Output connector: XLR-3M
  • Pin 1: shield
  • Pin 2: signal + phase
  • Pin 3: - phase
• Low-cut frequency, -3 dB: 15 Hz
• Noise with shorted input, A-weighted: 0.6 µV
• Output voltage, RMS: > 4 V
• Output voltage, peak: > 5.6 V
• Type of electronic circuit: Active
• THD@1VRMS, 1kHz: < 0.2 %
• Dynamic range: 136 dB
• Output impedance: < 200 ohm
• Output balance principle: Impedance balancing with Active Drive
• Common Mode Rejection Ratio (CMRR): > 50 dB
• Power supply (for full specifications): 48 V Phantom power (± 4 V)
• Current consumption: 2.8 mA
• Color: Matte Black
• Weight: 40 g (1.4 oz)
• Diameter: 19 mm (0.75 in)
• Length: 41 mm (1.6 in)
• Cable drive capability: 100 m (328 ft)
• Temperature range: -40 °C to 45 °C (-40 °F to 113 °F)
• Relative Humidity (RH): Up to 90 %