(0)

Questions? Call Us:
800-356-5844

Rose Brand PBST0011
9 ft to 16 ft Adjustable Horizontal Drape Support for Pipe & Base 1.0 Systems

OUR PART #  PBST0011

Our Price: $54.86
List Price: $57.00
(Low Price Guarantee)
Usually ships in 7-14 business days.
Need it sooner? Call us!

Recommended Accessories

The Rose Brand PBST0011 is shown in use with bases and adjustable uprights (sold separately), these telescoping, heavy-wall, high-strength, anodized aluminum drape supports can be used at any length from fully collapsed to maximum stop length. Units with a collapsed width of 5' or longer can extend approximately one foot past the maximum stop. Drapes and drape supports should always be mounted and removed while the uprights are vertical; never tip the structure up or down.

Rose Brand PBST0011 Specifications*:

  • Range: 9' - 16'
  • Collapsed: 9'2"
  • Stops at: 12'/14'/16'
  • Primary Use: Boothing & backwalls
  • Weight: 6 lbs

*Based on use of Banjo Cloth. You must build in a safety factor for heavier fabric.

Steel Light Heavy Base (17 lbs, 18"x18"x3/16")
Rose Brand PBSB0005 Steel Light Heavy Base (17 lbs, 18"x18"x3/16")
Bases are made of zinc-plated steel for rust protection and long life. All base assemblies include the the appropriate Slip-Fit Pin. Multiple pin holes allow for more than one upright to be used on a single base (back-to-back, ...
54.41 55.78
Usually ships in 7-14 business days.
Need it sooner? Call us!
Non-Telescoping Standard Upright Pipe: 2" O.D.x 8 ft.
Rose Brand PBSU0022 Non-Telescoping Standard Upright Pipe: 2" O.D.x 8 ft.
Standard uprights are made of heavy-duty 2" diameter anodized aluminum, and are equipped with a set of 4 slots positioned every 90° 3/4" from the top.Size: 8 ft. x 2"  
29.53 30.64
Usually ships in 7-14 business days.
Need it sooner? Call us!
Adjustable Upright 9 ft To 16 ft for Pipe & Base 1.0 Systems
Rose Brand PBSU0010 Adjustable Upright 9 ft To 16 ft for Pipe & Base 1.0 Systems
Rose Brand's PBSU0010 is a telescoping, heavy duty, 2" diameter anodized aluminum upright that's easy to use, requiring no tools. Just slide the upright over the base's Slip-Fit Pin, and quickly adjust to any height from 9 ft to 16 ft. Its ...
139.72 169.70 18
Usually ships in 7-14 business days.
Need it sooner? Call us!
Low Profile Baseplate for Pipe and Base 1.0 and 2.0 Systems
Rose Brand PBSB0004 Low Profile Baseplate for Pipe and Base 1.0 and 2.0 Systems
Rose Brands offers the PBSB0004, a low profile baseplate for Pipe and Base 1.0 and 2.0 Systems.Bases are made of zinc-plated steel for rust protection and long life (35 pound base also available in black). All base assemblies include the ...
90.92 93.00
Usually ships in 7-14 business days.
Need it sooner? Call us!
Standard 12 lb Base: 14" x 16" x 3/16"
Rose Brand PBSB0009 Standard 12 lb Base: 14" x 16" x 3/16"
Bases are made of zinc-plated steel for rust protection and long life.  All base assemblies include the the appropriate Slip-Fit Pin.  Multiple pin holes allow for more than one upright to be used on a single base (back-to-back, ...
26.19 28.40 8
Usually ships in 7-14 business days.
Need it sooner? Call us!
Non-Telescoping Standard Upright Pipe: 2" O.D.x 3 ft.
Rose Brand PBSU0020 Non-Telescoping Standard Upright Pipe: 2" O.D.x 3 ft.
Standard uprights are made of heavy-duty 2" diameter anodized aluminum, and are equipped with a set of 4 slots positioned every 90° 3/4" from the top.Rose Brand PBSU0020 Specifications: Size: 3 ft. x 2" Minimum Base Size: 6 lbs ...
15.07 15.45
Usually ships in 7-14 business days.
Need it sooner? Call us!

Rose Brand PBST0011
9 ft to 16 ft Adjustable Horizontal Drape Support for Pipe & Base 1.0 Systems

OUR PART #  PBST0011

Product Information:

The Rose Brand PBST0011 is shown in use with bases and adjustable uprights (sold separately), these telescoping, heavy-wall, high-strength, anodized aluminum drape supports can be used at any length from fully collapsed to maximum stop length. Units with a collapsed width of 5' or longer can extend approximately one foot past the maximum stop. Drapes and drape supports should always be mounted and removed while the uprights are vertical; never tip the structure up or down.

Rose Brand PBST0011 Specifications*:

  • Range: 9' - 16'
  • Collapsed: 9'2"
  • Stops at: 12'/14'/16'
  • Primary Use: Boothing & backwalls
  • Weight: 6 lbs

*Based on use of Banjo Cloth. You must build in a safety factor for heavier fabric.

Steel Light Heavy Base (17 lbs, 18"x18"x3/16")
Rose Brand PBSB0005 Steel Light Heavy Base (17 lbs, 18"x18"x3/16")
Bases are made of zinc-plated steel for rust protection and long life. All base assemblies include the the appropriate Slip-Fit Pin. Multiple pin holes allow for more than one upright to be used on a single base (back-to-back, ...
54.41 55.78
Usually ships in 7-14 business days.
Need it sooner? Call us!
Non-Telescoping Standard Upright Pipe: 2" O.D.x 8 ft.
Rose Brand PBSU0022 Non-Telescoping Standard Upright Pipe: 2" O.D.x 8 ft.
Standard uprights are made of heavy-duty 2" diameter anodized aluminum, and are equipped with a set of 4 slots positioned every 90° 3/4" from the top.Size: 8 ft. x 2"  
29.53 30.64
Usually ships in 7-14 business days.
Need it sooner? Call us!
Adjustable Upright 9 ft To 16 ft for Pipe & Base 1.0 Systems
Rose Brand PBSU0010 Adjustable Upright 9 ft To 16 ft for Pipe & Base 1.0 Systems
Rose Brand's PBSU0010 is a telescoping, heavy duty, 2" diameter anodized aluminum upright that's easy to use, requiring no tools. Just slide the upright over the base's Slip-Fit Pin, and quickly adjust to any height from 9 ft to 16 ft. Its ...
139.72 169.70 18
Usually ships in 7-14 business days.
Need it sooner? Call us!
Low Profile Baseplate for Pipe and Base 1.0 and 2.0 Systems
Rose Brand PBSB0004 Low Profile Baseplate for Pipe and Base 1.0 and 2.0 Systems
Rose Brands offers the PBSB0004, a low profile baseplate for Pipe and Base 1.0 and 2.0 Systems.Bases are made of zinc-plated steel for rust protection and long life (35 pound base also available in black). All base assemblies include the ...
90.92 93.00
Usually ships in 7-14 business days.
Need it sooner? Call us!
Standard 12 lb Base: 14" x 16" x 3/16"
Rose Brand PBSB0009 Standard 12 lb Base: 14" x 16" x 3/16"
Bases are made of zinc-plated steel for rust protection and long life.  All base assemblies include the the appropriate Slip-Fit Pin.  Multiple pin holes allow for more than one upright to be used on a single base (back-to-back, ...
26.19 28.40 8
Usually ships in 7-14 business days.
Need it sooner? Call us!
Non-Telescoping Standard Upright Pipe: 2" O.D.x 3 ft.
Rose Brand PBSU0020 Non-Telescoping Standard Upright Pipe: 2" O.D.x 3 ft.
Standard uprights are made of heavy-duty 2" diameter anodized aluminum, and are equipped with a set of 4 slots positioned every 90° 3/4" from the top.Rose Brand PBSU0020 Specifications: Size: 3 ft. x 2" Minimum Base Size: 6 lbs ...
15.07 15.45
Usually ships in 7-14 business days.
Need it sooner? Call us!
Add to Cart

We're sorry, only of this item available



Call a Sales Pro at 800-356-5844 for more information

© 2017 Full Compass Systems, LTD  9770 Silicon Prairie Parkway, Madison, WI 53593  All rights reserved.

We are not responsible for typographical errors in pricing or product specification
inaccuracies in our catalog or web site. Prices are subject to change without notice.