OUR PART # PTDZ770ULS-RST-01
High brightness of 7,000 lumens along with a compact body are the result of Panasonic's PT-DZ770ULS DLP projector's particular lamp drive system. Its RGB Booster achieves high image quality with levels of color reproduction and brightness that make each color stand out, plus it combines Panasonic's proprietary Vivid Color Control technology with a newly engineered Lamp Modulation Drive System for a 1-chip DLP™ projector, also helping produce bright and vivid colors.
NOTE: Lens(es) sold separately.
Vivid Color Control - This unique control technology optimizes the use of the color segment areas of the color wheel. It increases the brightness of each RGB color by minimizing the unallocated portions between the colors, to achieve truly vivid coloring.
Lamp Modulation Drive System - With the advanced lamp modulation technology, the projector is able to control the lamp intensity for each of the red, green, blue, and white segments of the color wheel separately. Because the actual light output is controlled in relation to each color segment, light usage is optimized and color balance is obtained without lowering the brightness. This results in bright vivid images with increased color fidelity.
Detail Clarity Processor - An advanced image-processing circuit that analyzes the video signal frequency range for each scene by extracting data on the distribution of high, mid, and low-frequency components, and brings out fine details accordingly. The resulting images have a more natural, three-dimensional appearance with crisp, clear detail.
System Daylight View 2 - Image details are less clear when a projector is used in a room with the lights on. Panasonic's System Daylight View 2 improves brightness perception by adjusting sharpness, gamma curves, and color corrections. This produces crisper, more stunning images with vivid colors even under bright conditions.
DICOM Simulation Mode - Similar to DICOM part 14, which is a medical imaging standard. It reproduces X-ray images with remarkable clarity.
Rec. 709 Mode for HDTV Projection - Optimal color reproduction can be achieved by selecting this mode, compliant with ITU-R Recommendation BT.709, when images from an HDTV source are projected.
The original Eco Filter consists of two Micro Cut Filters (electrostatic filters), a pre-filter and a main filter, which use an ion effect to collect extremely small dust particles. The pre-filter has a honeycomb configuration and the main filter is pleated to achieve a large surface area that raises its dust collecting performance. Thanks to these features, the Eco Filter has a replacement cycle of up to 12,000 hours,* which reduces the hassle of maintenance. And, as an environmental consideration, the filter can be washed with water and reused.**
* The usage environment affects the duration of the filter.
** When washing with water, please follow the procedures listed in the operating instructions. Also, we recommend replacing the filter with a new one after it has been washed and reused twice. If the filter is not sufficiently clean after washing, replace it with a new one.
The Dual-Lamp System eliminates the need to interrupt a presentation if a lamp should burn out (in dual-lamp operation mode). T he Lamp Relay mode also operates the lamps alternately to enable 24/7 projector operation.
Panasonic's unique liquid cooling system directly cools the DLP™ chip to improve performance and enable operation up to 113°F (45°C).* This allows use in a wider variety of environments, while stabilizing performance and keeping the unit quiet even in harsh conditions. It also contributes to realizing the compact body. Plus, Panasonic’s liquid cooling system is hermetically sealed, so you don’t need to replenish the liquid.
*The operating temperature range is 32°F to 104°F (0°C to 40°C) when the fan control is set to High Altitude mode (for altitudes from 1,400 m to 2,700 m (4,593 ft to 8,858 ft) above sea level). Also, if the ambient temperature exceeds 104°F (40°C) 95°F ([35°C] in High Altitude mode) when the projector is being used with Lamp Select set to Dual and Lamp Power set to High, the light output may be reduced approximately 20% to protect the projector.
*1 When the STANDBY MODE is set to ECO, network functions such as power on over the LAN will not operate. Also, only certain commands can be received for external control using the serial terminal.
*2 Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards.
*3 Brightness becomes 3,500 lm with contrast mode set to high.
*4 Brightness becomes 4,000 lm with contrast mode set to high.
*5 Optical axis shift function cannot be operated when used with the ET-DLE055.
*6 +45% from center of screen with the ET-DLE080.
*7 For the PT-DZ770K /DZ770LK only.
*8 Compliant with VESA CVT-RB.
*9 With legs at shortest position.
*10 Average value. May differ depending on the actual unit.
*11 The operating temperature range is 0 °C to 40 °C (32 °F to 104 °F) when the HIGH ALTITUDE MODE is set to ON (for altitudes from 1,400 m to 2,700 m (4,593 ft to 8,858 ft) above sea level) . Also, if the ambient temperature exceeds 40 °C (104 °F) (35 °C (95 °F) in HIGH ALTITUDE mode) when the projector is being used with LAMP SELECT set to DUAL and LAMP POWER set to NORMAL, the light output may be reduced approximately 20 % to protect the projector.