Questions? Call Us:

15" Passive Speaker, 60x40, Horn

OUR PART #:  PD564

The JBL Electronics PD564 is a Precision Directivity™ loudspeaker designed for applications requiring high output capability with excellent pattern control.
Learn More
Our Price: $3,600.00
Write the first review.

We guarantee to match pricing on the products we sell for new, identical and immediately available products if you see them offered at a lower price. Please contact us if you find a lower price before purchasing.

Learn More

Low Price


Usually ships in 7-14 business days.
Need it sooner? Call us!

Similar Products

The JBL Electronics PD564 is a Precision Directivity™ loudspeaker designed for applications requiring high output capability with excellent pattern control. The PD564 can be utilized in music or speech systems where frequency extension to 80 Hz is adequate, or combined with subwoofers to create extended bandwidth fullrange systems. The 2031H 380 mm (15”) low frequency transducer features high sensitivity and low power compression for high, continuous SPL capability. It is horn-loaded for additional sensitivity and improved pattern control. The 2432H 38 mm (1.5”) exit, 75 mm (3”) voice coil high frequency compression driver utilizes a neodymium magnet and aluminum diaphragm to deliver clear high-frequency projection, extended frequency response, and low distortion at even the highest drive levels.

The system is equipped with a large format rotatable PT waveguide allowing the PD564 to be used in either the vertical or horizontal orientation. The loudspeaker can be operated in either biamplified or full passive mode. In either case, digital signal processing is required in order to achieve specified performance. Input connectivity is achieved via CE-compliant covered barrier strips, and the cabinet is fitted with twenty-two M10 threaded suspension points supporting a wide variety of installation approaches.

JBL Electronics PD564 Features:

  • 380 mm (15”) horn-loaded low-frequency driver
  • Large PT™ Progressive Transition™ waveguides
    • Provide broad band 40° x 40° pattern control, low distortion at high SPL levels and smooth frequency response
  • Rotatable waveguide allows for either horizontal orvertical cabinet orientation
  • Sophisticated, steep-slope passive crossover network with switchablebi-amp/passive crossover modes

JBL Electronics PD564 Specifications:

  • Frequency Range (-10 dB): 50Hz to 20kHz
  • Frequency Response (±3 dB): 90Hz to 17kHz
  • Coverage Pattern: 60° x 40°
  • Directivity Factor (Q): 20
  • Directivity Index (DI): 13 dB
  • Crossover Modes: Bi-amp/Passive switchable
  • Passive Crossover: 1.2 kHz
  • Transducer Power Ratings (AES):
    • LF: 450W 2hrs, 300W 100hrs
    • HF: 75W, 2hrs, 50W 100hrs
  • System Power Rating (IEC):
    • Passive mode:
      • 500W 2hrs
      • 300W 100hrs (IEC)
  • Maximum SPL:
    • Bi-amp: LF: 133 cont (139 peak)
    • HF: 134 cont (139 peak)
    • Passive: 132 cont (138 peak)
  • System Sensitivity (1W @ 1m):
    • Passive Mode: 105 dB SPL
  • Nominal Impedance: 8 ohms
  • Transducers
    • Low Frequency Driver: 2031H 380 mm (15 in) driver with 75 mm (3 in) voice coil
    • Nominal Impedance: 8 ohms
    • Sensitivity (1W, 1m within operational band): 106 dB (avg 300Hz-1.3kHz)
    • High Frequency Driver: JBL 2432H, 38 mm (1.5 in) exit compression driver, 75 mm (3 in) voice coil
    • Nominal Impedance: 8 ohms
    • Sensitivity (1W @ 1m): 114 dB (avg 1.5k-5kHz)
    • Waveguide:
      • HF: PT-H40HF-1 300 x 300 mm (12 x 12 in)
  • Physical
    • Enclosure:
      • Trapezoidal with 10 degree side angles
      • 18 mm exterior grade 11-ply
      • Finnish birch plywood
    • Suspension Attachment: 20 points (5 top, 5 bottom, 4 each side, 2 rear), M10 threaded hardware (eyebolts NOT included)
    • Finish:  Black DuraFlex™ finish. White (-WH) available upon request.
    • Optional Weather Resistant Versions:
      • WRC for outdoor placement where the loudspeaker will be sheltered from direct exposure to the elements.
      • WRX for direct exposure or extreme environments, such as tropical or beach, or in areas with salt air, extreme high humidity or rapid changes in temperature. See WRC/WRX configuration sheet for details.
    • Grille: Powder coated 14 gauge perforated steel, acoustically transparent and weather resistant cloth backing.
    • Input Connectors:
      • Neutrik Speakon® NL4, plus CE-compliant covered barrier strip terminals
      • Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9 mm (.375 in) spade lugs
      • Speakon in parallel with barrier strip for loop-through.
    • Environmental Specifications: Mil-Std 810; IP-x3 per IEC529.
      • For higher environmental ratings, use WRC or WRX.
    • Dimensions (H x W x D in vertical orientation): 783.59 x 789.94 x 669.80 mm (30.85 x 31.10 x 26.37 in)
    • Net Weight: 69.0 kg (152 lb)
    • Optional Accessories: 229-00009-01 kit of three M10 x 35 mm forged shoulder steel eyebolts.
3 Pack of M10 x 35mm Eyebolts for JBL Speakers
JBL 229-00009-01 3 Pack of M10 x 35mm Eyebolts for JBL Speakers
This 3-pack of M10 x 35 mm forged shoulder steel eyebolts is designed for use with the JBL speakers' M10 suspension points for easy rigging.

In Stock
Free Shipping Available

To be the first to review this item, click here.

Add to Cart

We're sorry, only of this item available

Call a Sales Pro at 800-356-5844 for more information

© 2017 Full Compass Systems, LTD  9770 Silicon Prairie Parkway, Madison, WI 53593  All rights reserved.

We are not responsible for typographical errors in pricing or product specification
inaccuracies in our catalog or web site. Prices are subject to change without notice.