(0)

Questions? Call Us:
800-356-5844

Radio Design Labs D-SP1A
2-Watt 8 Ohm Loudspeaker, Decora

OUR PART #:  D-SP1A

The Radio Design Labs D SERIES-SP1A is a compact 8 ohm loudspeaker that delivers rich, detailed sound in Decora-compatible wall or chassis mounts.
Learn More
Our Price: $75.97
List Price: $101.63
You save 25%!
Write the first review.

We guarantee to match pricing on the products we sell for new, identical and immediately available products if you see them offered at a lower price. Please contact us if you find a lower price before purchasing.

Learn More

Low Price

Guaranteed

Radio Design Labs D-SP1A
Qty:
Usually ships in 7-14 business days.
Need it sooner? Call us!

Similar Products

The Radio Design Labs D SERIES-SP1A is a compact 8 ohm loudspeaker that delivers rich, detailed sound in Decora-compatible wall or chassis mounts. The driver is constructed of materials found in premium larger speakers, and the steel enclosure provides full baffling in a tightly-sealed, rigid structure. This produces sonic presence within an extended frequency range expected from larger speakers. Internal filtering rolls off out-of-band frequencies to reduce distortion and increase peak power capability. Dispersion covers a hemispherical area of nearly 180 degrees with the speaker mounted in a wall.

The input is connected through a 2-position detachable terminal block on the rear panel. The D SERIES-SP1A operates with a continuous audio input up to 2 watts, making it suited to be driven by speech or music content from amplifiers with a maximum rated power of up to 10 W. Models are available with grills in black (DB-SP1A), white (D-SP1A), gray (DG-SP1A) or stainless steel (DS-SP1A).

Radio Design Labs D-SP1A Features:

  • Acoustically Optimized Decora Enclosure
  • Fidelity Comparable to Larger Drivers
  • Exceptional Audio Quality for Ultra-Compact Size
  • Rich Presence and Detailed Clarity
  • Hemispherical Dispersion Mounted In Wall or Flat Surface
  • Convex Aluminum Cone with Rubber Surround
  • Neodymium Motor

Radio Design Labs D-SP1A Specifications:

  • Input Power: 2 W RMS (modulation peaks limited to 10 W)
  • Input Connection: Detachable terminal block (14 to 24 AWG)
  • Impedance: 8 Ohms (nominal)
  • Frequency Range: 150 Hz to 20 kHz, nominal
  • Sensitivity: 78 dB (1 W, 1m nominal)
  • Enclosure: Powdercoated steel
  • Grill: Formed perforated steel
  • Dimensions: Height: 4.1 in. 10.4 cm; Depth: 2.07 in. 5.26 cm (with terminal block); Width: 1.72 in. 4.37 cm
  • Mounting: Mounts in US electrical box, RDL international wall boxes WB-, surface mount box SMB-, or desktop chassis’ DC- available separately.
  • Mounting Box Minimum Depth: 2 in. 5.08 cm
  • Package Type: Cardboard Box
  • Package Dimensions: 3.625 x 4.625 x 2.125 in
  • Shipping Weight: 0.535 lbs. (D-SP1A, DB-SP1A); 0.525 lbs. (DS-SP1A)
  • WEEE weight: 0.390 lbs. (D-SP1A, DB-SP1A); 0.380 lbs. (DS-SP1A)
  • Tariff code: 8518.21.0000
Desktop or Wall-Mounting Decora Remote Control or Panel Chassis (Gray)
Radio Design Labs DC-4G Desktop or Wall-Mounting Decora Remote Control or Panel Chassis (Gray)
Radio Design Labs' DC-4G desktop chassis holds four Decora®-style products, including RDL remote controls and connector plates.  Installation is facilitated using the included mounting plate, which allows the chassis to mount to ...
93.06 124.48 25

In Stock
Free Shipping Available
3RU Rack Panel Mount for 9 Decora Models
Radio Design Labs RM-D9 3RU Rack Panel Mount for 9 Decora Models
Radio Design Labs' RM-D9 is a 3 RU rack panel that allows the mounting of 9 Decora products, such as RDL remote controls and D-Series connector plates. The installer can label each installed module behind an included protection lens.The ...
67.75 90.63 25

In Stock
Wall Mount Chasis for Decora
Radio Design Labs DC-2G Wall Mount Chasis for Decora
The DC-2G desktop chassis holds two Decora®-style products, including RDL remote controls and connector plates. Installation is facilitated using the included mounting plate, which allows the chassis to mount to a tabletop or on a ...
66.33 88.72 25

In Stock
Free Shipping Available
Single-Gang Universal Wall Box
Radio Design Labs WB-1U Single-Gang Universal Wall Box
Can be mounted in International or US walls and cabinets. Features side and rear mounting holes which secure the box in new construction. Also has folding tabs which secure the box in an existing wall or cabinet.Dimensions: Height: 4.125 ...
14.20 16.75 15

In Stock
Single Gang Decora Cover Plate in Stainless Steel
Radio Design Labs CP-1S Single Gang Decora Cover Plate in Stainless Steel
The Radio Design Labs CP-1S is a single gang decora cover plate in stainless steel.Dimensions: 4.55" H x 2.8" W (11.6 x 7.1 cm)Package Dimensions: 2" x 3"Shipping Weight: 0.072 lbs
11.07 13.05 15

In Stock
Wall Plate, Single Cover Plate, White
Radio Design Labs CP1-W Wall Plate, Single Cover Plate, White
For use with RDL R style remote controls and D style connector plates; Mount with RDL WB-1U Universal Wall Box.
11.06 13.05 15

In Stock
Desktop/Wall-Mounted Chassis for Decora® Remote Controls and Panels
Radio Design Labs DC-3G Desktop/Wall-Mounted Chassis for Decora® Remote Controls and Panels
Radio Design Labs' DC-3G desktop chassis holds three Decora®-style products, including RDL remote controls and connector plates.  Installation is facilitated using the included mounting plate, which allows the chassis to mount ...
79.59 106.46 25

Usually ships in 7-14 business days.
Need it sooner? Call us!
White Desktop or Wall-Mounted Chassis for Decora® Remote Controls and Panels
Radio Design Labs DC-3W White Desktop or Wall-Mounted Chassis for Decora® Remote Controls and Panels
Radio Design Labs' DC-3W desktop chassis hold three Decora®-style products, including RDL remote controls and connector plates.  Installation is facilitated using the included mounting plate, which allows the chassis to mount to a ...
79.59 106.46 25

Usually ships in 7-14 business days.
Need it sooner? Call us!
Desk Top Chassis for Decora, White
Radio Design Labs DC-2W Desk Top Chassis for Decora, White
The DC-2W white desktop chassis holds two Decora®-style products, including RDL remote controls and connector plates. Installation is facilitated using the included mounting plate, which allows the chassis to mount to a tabletop or on a ...
66.33 88.72 25

Usually ships in 7-14 business days.
Need it sooner? Call us!
1RU Rack Panel Mount for 3 Decora Models
Radio Design Labs RM-D3 1RU Rack Panel Mount for 3 Decora Models
Radio Design Labs' RM-D3 is a 1 RU rack panel that allows the mounting of 3 Decora products, such as RDL® remote controls and D-Series connector plates. The installer can label each installed module behind an included protection lens. The ...
58.27 77.95 25

Usually ships in 7-14 business days.
Need it sooner? Call us!
Desktop or Wall Mounted Chassis for Decora Remote Controls and Panels
Radio Design Labs DC-1W Desktop or Wall Mounted Chassis for Decora Remote Controls and Panels
The Radio Design Labs DC-1W desktop chassis holds one Decora-style product, which includes RDL remote controls and connector plates. Installation is facilitated using the included mounting plate, which allows the chassis to mount to a ...
52.78 70.58 25

Usually ships in 7-14 business days.
Need it sooner? Call us!
Wall Mount Chasis for Decora
Radio Design Labs DC-1G Wall Mount Chasis for Decora
The DC-1G desktop chassis holds one Decora®-style product, including RDL remote controls and connector plates. Installation is facilitated using the included mounting plate, which allows the chassis to mount to a tabletop or on a vertical ...
52.78 70.58 25

Usually ships in 7-14 business days.
Need it sooner? Call us!
Gray Dual-Gang Surface Mount Boxes for 2 Decora Remote Controls and Plates
Radio Design Labs SMB-2G Gray Dual-Gang Surface Mount Boxes for 2 Decora Remote Controls and Plates
Radio Design Labs' SMB-2G dual-gang surface mount boxes holds two Decora®-style products, including RDL remote controls and connector plates.  Knockouts are provided for fastening standard metric or North American conduits to the ...
43.00 57.51 25

Usually ships in 7-14 business days.
Need it sooner? Call us!
Single-Gang Gray Surface Mount Boxes for Decora-Style Devices
Radio Design Labs SMB-1G Single-Gang Gray Surface Mount Boxes for Decora-Style Devices
Radio Design Labs' SMB-1G surface mount boxes holds one Decora®-style products, including RDL remote controls and connector plates.  Knockouts are provided for fastening standard metric or North American conduits to the rear of the ...
39.55 52.89 25

Usually ships in 7-14 business days.
Need it sooner? Call us!
Dual-Gang Universal Wall Box
Radio Design Labs WB-2U Dual-Gang Universal Wall Box
Can be mounted in International or US walls and cabinets. Features side and rear mounting holes which secure the box in new construction. Also has folding tabs which secure the box in an existing wall or cabinet.Dimensions: Height: 4.125 ...
15.32 18.06 15

Usually ships in 7-14 business days.
Need it sooner? Call us!
Stainless Steel Quad Cover Plate
Radio Design Labs CP-4S Stainless Steel Quad Cover Plate
For use with RDL SMB-4 and DC-4 for mounting RDL remote controls and jack panels.  Compatible with Decora style products and American electrical boxes.Shipping Weight: 0.16 lbsPackage Dimensions: 7" x 9"
13.92 16.42 15

Usually ships in 7-14 business days.
Need it sooner? Call us!
Double Cover Plate/Gray
Radio Design Labs CP-2/G Double Cover Plate/Gray
For use with RDL R style remote controls and D style connector plates; Mount with RDL WB-2U Universal Wall Box. 
12.03 14.19 15

Usually ships in 7-14 business days.
Need it sooner? Call us!
Stainless Steel Dual-Gang Wall Plate
Radio Design Labs CP-2S Stainless Steel Dual-Gang Wall Plate
Dimensions: 4.55" x 4.55" (11.6 x 11.6 cm)
12.03 14.19 15

Usually ships in 7-14 business days.
Need it sooner? Call us!
Single-Gang Gray Wall Plate for SMB-1, DC-1, WB-1U, Decora-Style Products
Radio Design Labs CP-1/G Single-Gang Gray Wall Plate for SMB-1, DC-1, WB-1U, Decora-Style Products
Radio Design Labs' CP-1G is for use with RDL SMB-1, DC-1 and WB-1U for mounting RDL remote controls and jack panels.  Compatible with Decora style products and American electrical boxes.Height: 4.55" (11.6 cm)Width: 2.80" (7.1 cm)
11.06 13.05 15

Usually ships in 7-14 business days.
Need it sooner? Call us!

To be the first to review this item, click here.

Add to Cart

We're sorry, only of this item available



Call a Sales Pro at 800-356-5844 for more information

© 2017 Full Compass Systems, LTD  9770 Silicon Prairie Parkway, Madison, WI 53593  All rights reserved.

We are not responsible for typographical errors in pricing or product specification
inaccuracies in our catalog or web site. Prices are subject to change without notice.