Traynor YBA300 300W Tube Bass Amplifier Head

Traynor's all-tube 300W YBA300 bass amplifier head was built from the ground up with hard-touring musicians in mind. Able to deliver full power at 2 or 4 Ohms, and stocked with (3) 12AX7s, (1) 12AU7, and (12) 6L6 tubes, this head can give you that ever-popular tube sound without sacrificing reliability.

Reliability

Highly effective and straightforward tube bias adjust with clear and concise LED display ensure any player can easily adjust pairs of the YBA300's power tubes without fear. LED indicators on the rear of the amp show proper tube function and status. In rare cases where a tube fails, the YBA300 will lock out the problem tube and its partner, allowing the amp to finish the show on the remaining active tubes. LED display clearly shows which tube needs service.

Versatility

The YBA300 ships with twelve hand-selected and tested 6L6 power tubes, delivering a truly classic hi-fi smooth tube tone. For players looking for more aggressive bass sound, the 6L6 tubes can be easily changed to any high-quality EL34 tube set and be rebiased in the field, making this YBA300 essentially two amps in one versatile chassis.

Simple Controls

This amp head is made in Canada using solid plywood cabinet construction, heavy gauge steel chassis, high-quality pots and jacks and is covered by a 2-year unlimited warranty in the USA and Canada.

Traynor YBA300 Features:

• 300 Watt All-Tube Bass Amp
• Delivers Maximum Power at 2 or 4 Ohms
• Comes Stock with 3 x 12AX7, 1 x 12AU7 and 12 x 6L6 Tubes
• 6L6 Power Tubes Can Be Swapped for EL34 Tubes for Different Amp Character
• Player Friendly Individual bias adjust with indicator LEDs for Output Tubes
• Tube Lockout for each Pair of Output Tubes removes damaged tubes from signal path allowing amp to continue operation in emergencies)
• Simple and Effective Gain, Bass, Sweep-Mid, Treble and Master Controls
• Deep, Bright, Resonance Tone Shaping Controls
• Pre/Post EQ DI Output, Effects loop, Tuner Output
• High and Low Level Inputs for Active or Passive Basses
• 1/4" and Speakon™ Output Connectors
• Made In Canada

Traynor YBA300 Specifications:

• Power @ Min. Impedance: 300W @ 2/4 Ohms switchable (250W into 8 Ohms)
• Minimum Impedance: 2 Ohms
• Burst Power - 2 cycle: 400 Watts
• Frequency Response (±3dB): 30Hz - 16kHz
• Hum and Noise (dB): -90db
• Inputs: 1
• Channel 1 - Inputs: 2x 1/4"
• Channel 1 - Controls: Gain
• Master Volume Control: Yes
• Main Tone Controls: Treble, Mid, Frequency, Bass
• Input Sensitivity: 20 mV
• Master Outputs: Preamp out (Pre Master)
• Line Out (type / configuration): XLR Balanced (Pre/Post, Grnd Lift)
• Line Out Sensitivity: 200 Vrms
• Effects Loop: Preamp out, Power Amp in, Loop Thru
• Effects Return Sensitivity: 1 Vrms
• LED Indicators: Power/Standby
• External Speaker Output / Location 2x 1/4", 1x Speakon; Rear
• Other Features:
  • Bright, Deep & Resonance Switches
  • Impedance Selector: 2/4 Ohms
  • Tubes: 3x12AX7, 1x12AU7, 12x6L6
  • Tuner Output: 1/4"
• Dimensions (DxWxH): 11.5" x 24" x 10" (29 x 61 x 25.4cm)
• Weight: 51 lbs (23 kg)