(0)

Questions? Call Us:
800-356-5844

Rode VIDEOMIC-PRO-R
Compact Shotgun Mic w/Rycote Lyre shockmount, HPF, Level Control

OUR PART #  VIDEOMIC-PRO-R

Our Price: $229.00
List Price: $349.00
You save 34%! (Low Price Guarantee)
In Stock

Recommended Accessories

RØDE Microphones' VideoMic Pro combines broadcast quality audio with a compact and lightweight ergonomic design. The company's updated version of this shotgun mic, the VideoMic Pro-R, comes with a Rycote® Lyre® shockmount, HPF and level control. The mic is designed to connect directly to consumer video cameras and DSLRs, and incorporates features specific to high-end video - particularly its noise transference, which has been significantly reduced using a revised shock mounting system and a lightweight premium cable.

RØDE VideoMic Pro-R Features:

  • Rycote® Lyre® shock mounting onboard
  • All new capsule with lower noise and higher sensitivity
  • Broadcast recording quality condenser microphone
  • Compact design (only 150mm/6" length)
  • Ultra lightweight (only 85g / 3 oz.)
  • 9V battery powered, with up to 70 hours battery life (alkaline)
  • Integrated shock mounting
  • Integrated foam windshield
  • 3.5mm stereo mini-jack output (dual mono)
  • Two-step High Pass Filter (flat, 80Hz)
  • Three-position level control (-10dB, 0, +20dB)
  • Camera shoe mount with 3/8" thread for easy boompole mounting

RØDE VideoMic Pro-R Specifications:

  • Power: 9V alkaline battery (Current 7.8 mA)
  • Acoustic Principle: Line Gradient
  • Directional Pattern: Super-Cardioid
  • Frequency Range: 40Hz-20kHz, selectable HPF @80Hz/12dB/octave
  • Output Impedance: 200 ohms
  • Signal Noise Ratio: 74 dB SPL (A - weighted per IEC651)
  • Equivalent Noise: 20 dB SPL (A - weighted per IEC651)
  • Maximum SPL: 134dB SPL (@ 1kHz, 1% THD into 1Kohm load)
  • Maximum Output Voltage: +6.9dBu (@ 1% THD into 1Kohm)
  • Sensitivity: -38 dB re 1 Volt/Pascal (15 mV @ 94dB SPL) +/- 2 dB @ 1kHz
  • Weight: 3 oz. (85 g)
  • Dimensions: 3.74" H x 1.69" W x 6" D (95 x 43 x 150 mm)
Telescoping Boom Pole
Rode BOOMPOLE Telescoping Boom Pole
Machined from high grade aluminium, the boom pole is designed for applications where a 3m extension pole for shotgun microphones is required.Attaches to the RM5 Stand Mount (NT5, NTG-1 & -NTG-2) and VideoMic via its 3/8” thread or ...
149.00 199.00 25
In Stock
Free Shipping Available
Adapter for VideoMic
Rode VXLR Adapter for VideoMic
Female mini jack 1/8" to male XLR adapter for connecting the Rode VideoMic directly to cameras with XLR input.
9.99 12.99 23
In Stock
Shotgun Wind Screen
Rode WSVM Shotgun Wind Screen
Shotgun windscreen for the Rode NTG-1, NTG-2, VideoMic microphones.
11.99
In Stock
Extension Cable for use with VideoMic BoomPole
Rode VC1 Extension Cable for use with VideoMic BoomPole
Extension cable for the Rode VideoMic for use with the BoomPole.
10.99
In Stock
Telescoping Boom Pole
Rode MINI-BOOMPOLE Telescoping Boom Pole
The mini-boompole attaches to the RM5 stand mount, SM3, SM4, and SM5 shockmounts, and VideoMic and Stereo VideoMic. It extends from 2.8 ft (33") to 6.7 ft (81"). It is a lightweight, high grade professional boom pole. The ...
129.00 149.00 13
Usually ships in 7-14 business days.
Need it sooner? Call us!
Free Shipping Available
Ultra Lightweight, Modular Boom Pole
Rode MICRO-BOOMPOLE-PRO Ultra Lightweight, Modular Boom Pole
RØDE's lightweight Micro Boompole provides ultimate boom pole performance in a convenient and portable 2m size. Intuitive twist locks allow the Micro Boompole’s three sections to smoothly extend to 2063mm (6¾’), while the ...
99.00 109.00 9
Usually ships in 7-14 business days.
Need it sooner? Call us!
Telescopic Microphone Extension System
Rode Micro Boompole Telescopic Microphone Extension System
The RØDE Micro Boompole provides ultimate boom pole performance in a convenient and portable size.  Intuitive twist locks allow the Micro Boompole's three sections to smoothly extend to 2063mm (6¾’), while the ergonomic grip ...
49.00 69.00 29
Usually ships in 7-14 business days.
Need it sooner? Call us!
Artificial Fur Wind Shield for VideoMic Pro
Rode DEADCAT-VMP Artificial Fur Wind Shield for VideoMic Pro
RØDE's DeadCat VMP is a furry wind cover for their VideoMic Pro and is designed for use in windy environments.  Its artificial fur is specially designed so as to minimize wind noise while remaining acoustically ...
39.00 59.00 34
Usually ships in 7-14 business days.
Need it sooner? Call us!
Cold Shoe Pistol Grip
Rode PG1 Cold Shoe Pistol Grip
The PG1 pistol grip for VideoMic is a convenient and ergonomic way to operate your RODE VideoMic or Stereo VideoMic independently of your video camera.A built-in cold shoe mount makes a secure connection between the microphone and the ...
29.95 39.95 25
Usually ships in 7-14 business days.
Need it sooner? Call us!
Free Shipping Available
Collapsible Mini Tripod Microphone Stand with 1/4"Thread Mounting
Rode Tripod Collapsible Mini Tripod Microphone Stand with 1/4"Thread Mounting
RØDE's Tripod is a collapsible mini tripod designed for mounting lightweight microphones that support 1/4" mounting.  The Tripod allows you to mount the microphone on any surface that will give you a concentrated and centralized ...
24.99
Usually ships in 7-14 business days.
Need it sooner? Call us!
Zip Pouch for Rode NTG-2 Microphone
Rode ZP2 Zip Pouch for Rode NTG-2 Microphone
Zip Pouch for Rode NTG-2 Microphone.
12.99
Usually ships in 7-14 business days.
Need it sooner? Call us!
Zip Pouch for Rode Microphones
Rode ZP1 Zip Pouch for Rode Microphones
Zip Pouch for Rode Microphones.Suits: S1, NT1-A, NT2-A, NT3, NT1000, NTG-1 & Broadcaster microphones.
9.99
Usually ships in 7-14 business days.
Need it sooner? Call us!

Rode VIDEOMIC-PRO-R
Compact Shotgun Mic w/Rycote Lyre shockmount, HPF, Level Control

OUR PART #  VIDEOMIC-PRO-R

Product Information:

RØDE Microphones' VideoMic Pro combines broadcast quality audio with a compact and lightweight ergonomic design. The company's updated version of this shotgun mic, the VideoMic Pro-R, comes with a Rycote® Lyre® shockmount, HPF and level control. The mic is designed to connect directly to consumer video cameras and DSLRs, and incorporates features specific to high-end video - particularly its noise transference, which has been significantly reduced using a revised shock mounting system and a lightweight premium cable.

RØDE VideoMic Pro-R Features:

  • Rycote® Lyre® shock mounting onboard
  • All new capsule with lower noise and higher sensitivity
  • Broadcast recording quality condenser microphone
  • Compact design (only 150mm/6" length)
  • Ultra lightweight (only 85g / 3 oz.)
  • 9V battery powered, with up to 70 hours battery life (alkaline)
  • Integrated shock mounting
  • Integrated foam windshield
  • 3.5mm stereo mini-jack output (dual mono)
  • Two-step High Pass Filter (flat, 80Hz)
  • Three-position level control (-10dB, 0, +20dB)
  • Camera shoe mount with 3/8" thread for easy boompole mounting

RØDE VideoMic Pro-R Specifications:

  • Power: 9V alkaline battery (Current 7.8 mA)
  • Acoustic Principle: Line Gradient
  • Directional Pattern: Super-Cardioid
  • Frequency Range: 40Hz-20kHz, selectable HPF @80Hz/12dB/octave
  • Output Impedance: 200 ohms
  • Signal Noise Ratio: 74 dB SPL (A - weighted per IEC651)
  • Equivalent Noise: 20 dB SPL (A - weighted per IEC651)
  • Maximum SPL: 134dB SPL (@ 1kHz, 1% THD into 1Kohm load)
  • Maximum Output Voltage: +6.9dBu (@ 1% THD into 1Kohm)
  • Sensitivity: -38 dB re 1 Volt/Pascal (15 mV @ 94dB SPL) +/- 2 dB @ 1kHz
  • Weight: 3 oz. (85 g)
  • Dimensions: 3.74" H x 1.69" W x 6" D (95 x 43 x 150 mm)
Telescoping Boom Pole
Rode BOOMPOLE Telescoping Boom Pole
Machined from high grade aluminium, the boom pole is designed for applications where a 3m extension pole for shotgun microphones is required.Attaches to the RM5 Stand Mount (NT5, NTG-1 & -NTG-2) and VideoMic via its 3/8” thread or ...
149.00 199.00 25
In Stock
Free Shipping Available
Adapter for VideoMic
Rode VXLR Adapter for VideoMic
Female mini jack 1/8" to male XLR adapter for connecting the Rode VideoMic directly to cameras with XLR input.
9.99 12.99 23
In Stock
Shotgun Wind Screen
Rode WSVM Shotgun Wind Screen
Shotgun windscreen for the Rode NTG-1, NTG-2, VideoMic microphones.
11.99
In Stock
Extension Cable for use with VideoMic BoomPole
Rode VC1 Extension Cable for use with VideoMic BoomPole
Extension cable for the Rode VideoMic for use with the BoomPole.
10.99
In Stock
Telescoping Boom Pole
Rode MINI-BOOMPOLE Telescoping Boom Pole
The mini-boompole attaches to the RM5 stand mount, SM3, SM4, and SM5 shockmounts, and VideoMic and Stereo VideoMic. It extends from 2.8 ft (33") to 6.7 ft (81"). It is a lightweight, high grade professional boom pole. The ...
129.00 149.00 13
Usually ships in 7-14 business days.
Need it sooner? Call us!
Free Shipping Available
Ultra Lightweight, Modular Boom Pole
Rode MICRO-BOOMPOLE-PRO Ultra Lightweight, Modular Boom Pole
RØDE's lightweight Micro Boompole provides ultimate boom pole performance in a convenient and portable 2m size. Intuitive twist locks allow the Micro Boompole’s three sections to smoothly extend to 2063mm (6¾’), while the ...
99.00 109.00 9
Usually ships in 7-14 business days.
Need it sooner? Call us!
Telescopic Microphone Extension System
Rode Micro Boompole Telescopic Microphone Extension System
The RØDE Micro Boompole provides ultimate boom pole performance in a convenient and portable size.  Intuitive twist locks allow the Micro Boompole's three sections to smoothly extend to 2063mm (6¾’), while the ergonomic grip ...
49.00 69.00 29
Usually ships in 7-14 business days.
Need it sooner? Call us!
Artificial Fur Wind Shield for VideoMic Pro
Rode DEADCAT-VMP Artificial Fur Wind Shield for VideoMic Pro
RØDE's DeadCat VMP is a furry wind cover for their VideoMic Pro and is designed for use in windy environments.  Its artificial fur is specially designed so as to minimize wind noise while remaining acoustically ...
39.00 59.00 34
Usually ships in 7-14 business days.
Need it sooner? Call us!
Cold Shoe Pistol Grip
Rode PG1 Cold Shoe Pistol Grip
The PG1 pistol grip for VideoMic is a convenient and ergonomic way to operate your RODE VideoMic or Stereo VideoMic independently of your video camera.A built-in cold shoe mount makes a secure connection between the microphone and the ...
29.95 39.95 25
Usually ships in 7-14 business days.
Need it sooner? Call us!
Free Shipping Available
Collapsible Mini Tripod Microphone Stand with 1/4"Thread Mounting
Rode Tripod Collapsible Mini Tripod Microphone Stand with 1/4"Thread Mounting
RØDE's Tripod is a collapsible mini tripod designed for mounting lightweight microphones that support 1/4" mounting.  The Tripod allows you to mount the microphone on any surface that will give you a concentrated and centralized ...
24.99
Usually ships in 7-14 business days.
Need it sooner? Call us!
Zip Pouch for Rode NTG-2 Microphone
Rode ZP2 Zip Pouch for Rode NTG-2 Microphone
Zip Pouch for Rode NTG-2 Microphone.
12.99
Usually ships in 7-14 business days.
Need it sooner? Call us!
Zip Pouch for Rode Microphones
Rode ZP1 Zip Pouch for Rode Microphones
Zip Pouch for Rode Microphones.Suits: S1, NT1-A, NT2-A, NT3, NT1000, NTG-1 & Broadcaster microphones.
9.99
Usually ships in 7-14 business days.
Need it sooner? Call us!
Add to Cart

We're sorry, only of this item available



Call a Sales Pro at 800-356-5844 for more information

© 2017 Full Compass Systems, LTD  9770 Silicon Prairie Parkway, Madison, WI 53593  All rights reserved.

We are not responsible for typographical errors in pricing or product specification
inaccuracies in our catalog or web site. Prices are subject to change without notice.