(0)

Questions? Call Us:
800-356-5844

Radio Design Labs ST-MPA24
2-Channel, 24V Dual Microphone Phantom Adapter

OUR PART #:  STMPA24

The Radio Design Labs ST-MPA24 contains two identical phantom power circuits and a common power supply input.
Learn More
Our Price: $93.14
List Price: $124.59
You save 25%!
Write the first review.

We guarantee to match pricing on the products we sell for new, identical and immediately available products if you see them offered at a lower price. Please contact us if you find a lower price before purchasing.

Learn More

Low Price

Guaranteed

Radio Design Labs ST-MPA24
Qty:
Usually ships in 7-14 business days.
Need it sooner? Call us!

Similar Products

The Radio Design Labs ST-MPA24 contains two identical phantom power circuits and a common power supply input. If only one mic input is to be converted for phantom operation, only one circuit needs to be used. Each circuit has a mic input and a mic output. Phantom voltage appears on each of the mic input terminals; there is no voltage on the mic output terminals. Therefore, the Radio Design Labs ST-MPA24 can convert any existing mic input into a phantom powered input.

Module operation is from a 24 Vdc ground referenced power supply. The Radio Design Labs ST-MPA24 has an internal pass transistor-regulator filter circuit which permits this incoming voltage to be adjusted to the desired phantom voltage, up to 92% of the supply input voltage. A multi-turn trimming potentiometer is provided to reduce the phantom voltage if desired. In the default fully clockwise position, the Radio Design Labs ST-MPA24 provides "P24" 24 Vdc phantom voltage conformant to IEC 61938.

Radio Design Labs ST-MPA24 Features:

  • Add Phantom Powered Mics to Standard Inputs
  • Two Phantom Adapters in One Module
  • P24 per IEC 61938
  • Phantom Conversion with Full Frequency Response
  • Phantom Voltage Adjustable Up to IEC Standard 24 Vdc
  • Highly-Filtered Phantom Power

Radio Design Labs ST-MPA24 Specifications:

  • Channels: 2
  • Frequency Response: 20 Hz to 100 kHz (± 0.025 dB, 150O source, 1 kO load)
  • Phantom Voltage: P24, 24 Vdc
  • Standard for Phantom: IEC 61938: 2013
  • Ambient Operating Environment: 0° C to 55° C
  • Power Requirement: Ground-Referenced, 24 Vdc @ 35 mA(with 20 mA load)
  • Package Type: Cardboard Box
  • Package Dimensions: 2 x 2 x 4 in.
  • Shipping Weight: 0.2 lbs.
  • WEEE weight: 0.145 lbs.
  • Tariff code: 8518.40.2000
Rackmount System for 12 Stick-On Units
Radio Design Labs STR-19A Rackmount System for 12 Stick-On Units
Radio Design Labs' STR-19A Racking System holds up to 12 STICK-ONs in a 19" rack and only occupies two rack spaces.
136.70 182.87 25

In Stock
Free Shipping Available
Stick-On Mounting Rack for 10 Units
Radio Design Labs SR-10 Stick-On Mounting Rack for 10 Units
Radio Design Labs' STR-10 Racking System holds up to 10 STICK-ON units.  It holds STICK-ONs at an angle allowing for control adjustment from either the edge of a STICK-ON, or the top (depending on where the adjustment is located on ...
65.41 87.48 25

In Stock
Free Shipping Available
Din Rail Adaptor for STICK-ON
Radio Design Labs DRA-35S Din Rail Adaptor for STICK-ON
The DRA-35S is a 35 mm DIN rail mounting bracket that provides positive mounting for any RDL STICK-ON® module. The oblique mounting angle of the DRA-35S allows an installer to mount several STICK-ON modules to a single DIN rail. Access to ...
19.40 22.89 15

In Stock
Mounting Kit for STICK-ON, TX, or Rack-Up module
Radio Design Labs MB1-RDL Mounting Kit for STICK-ON, TX, or Rack-Up module
Two mounting brackets mounts a STICK-ON, TX, or Rack-Up module to a flat surface.
3.46 4.08 15

In Stock
Rackmount Kit for 10 Stick-On Units
Radio Design Labs STR-19B Rackmount Kit for 10 Stick-On Units
Radio Design Labs' STR-19B Racking System holds up to 10 STICK-ON unitss in a 19 inch rack and only occupies two rack spaces. The STR-19B holds STICK-ONs at an angle allowing for control adjustment from either the edge of a STICK-ON, or ...
162.53 217.40 25

Usually ships in 7-14 business days.
Need it sooner? Call us!
Free Shipping Available
Mounting Frame for Stick/TX
Radio Design Labs SR-4 Mounting Frame for Stick/TX
Radio Design Labs' SR-4 is a universal module chassis that can mount to a backboard, wall or nearly any other support. It provides mounting for 4 STICK-ON power amplifiers or 7 standard STICK-ON modules. TX ™ modules may also be mounted. ...
84.88 113.53 25

Usually ships in 7-14 business days.
Need it sooner? Call us!
STICK-ON Series 19"W Mounting Rack for up to12 Modules
Radio Design Labs SR-12A STICK-ON Series 19"W Mounting Rack for up to12 Modules
Radio Design Labs' SR-12A chassis can be mounted in a rack or on a backboard to provide mounting of 12 STICK-ONs.
65.41 87.48 25

Usually ships in 7-14 business days.
Need it sooner? Call us!
Mounting Bracket for up to 4 STICK-ON Modules
Radio Design Labs ST-PBR4 Mounting Bracket for up to 4 STICK-ON Modules
Radio Design Labs' ST-PBR4 is a mounting frame with slots for four STICK-ON modules.  The ST-PBR4 mounts on an FP-PSB1A power supply bracket or to any flat surface.  The ST-PBR4 design allows the installer to secure the modules ...
34.59 46.27 25

Usually ships in 7-14 business days.
Need it sooner? Call us!
6 Stick-On DIN Rail Adapter Modules
Radio Design Labs DRA-35S-6 6 Stick-On DIN Rail Adapter Modules
Radio Design Labs' DRA-35S-6 is a 35 mm DIN rail mounting bracket that provides positive mounting for any RDL STICK-ON® module.  The oblique mounting angle of the DRA-35S allows an installer to mount several STICK-ON modules to a ...
32.87 38.78 15

Usually ships in 7-14 business days.
Need it sooner? Call us!
Mounting Strip for STICK-ON Units
Radio Design Labs Smk 12 Mounting Strip for STICK-ON Units
The SMK-12 allows removable surface (up to 6 units) or edge (typically 12, max. 16) mounting of STICK-ON units. They can be fastened to its surface using screws or adhesive foam pads.
28.01 37.45 25

Usually ships in 7-14 business days.
Need it sooner? Call us!
Mounting Bracket for STICK-ON Modules
Radio Design Labs ST-RRB1 Mounting Bracket for STICK-ON Modules
Radio Design Labs' ST-RRB1 mounting kit contains a bracket to attach a STICK-ON module to a rear rack rail or to any flat surface. The module slides into the holder and snaps into position. The module may easily be removed.
22.67 26.74 15

Usually ships in 7-14 business days.
Need it sooner? Call us!
Detachable Terminal Block
Radio Design Labs Dtb Rdl Detachable Terminal Block
Use DTB's to quickly detach and reattach wiring harness to STICK-ON units.
6.92 8.16 15

Usually ships in 7-14 business days.
Need it sooner? Call us!

To be the first to review this item, click here.

Add to Cart

We're sorry, only of this item available



Call a Sales Pro at 800-356-5844 for more information

© 2017 Full Compass Systems, LTD  9770 Silicon Prairie Parkway, Madison, WI 53593  All rights reserved.

We are not responsible for typographical errors in pricing or product specification
inaccuracies in our catalog or web site. Prices are subject to change without notice.