Beyerdynamic MPC 67 RC Acoustic Boundary Mic with Remote Control Switch

The Beyerdynamic MPC 67 RC is an acoustical boundary microphone with many different functions accomodated in a small, unobtrusive housing. Depending on the application, you can choose between three operating modes: On/Off, Push To Talk and Push To Mute.

Furthermore, the frequency response can be tailored for use in three modes: linear, 80 Hz bass roll off, 180 Hz bass roll off. The MPC 67 RC is switched on and off with a noiseless film button. An LED indicator shows the ready-to-talk status. The different functions are controlled by an 8 bit micro controller. Due to its unobtrusive design, the MPC 67 RC is ideal for tele/video conferencing, round table discussions or distance learning.

The MPC 67 RC is available with a remote control. The microphone can be activated by an external switch and an external device (e.g. video camera) can be triggered by a MOSFET output.

Beyerdynamic MPC 67 RC Features:

• ON/OFF, PTT and PTM function
• RISC-µC controlled
• LED-indicator
• Half-cardioid polar pattern
• Flat, wide frequency response
• Switchable frequency response correction
• High-gain-before-feedback
• MPC 67 RC: Remote control of the switch and triggering of an external contact

Beyerdynamic MPC 67 RC Specifications:

• Transducer Type: Condenser (back-electret)
• Operating principle: Pressure gradient
• Frequency Response (Position Linear): 60Hz - 20kHz
• Polar pattern: Semi-cardioid
• Open circuit voltage: 14 mV/Pa = -37 dBV
• Nominal output impedance: 180 oHms
• Load impedance: >/= 1,000 oHms
• Signal-to-noise ratio rel. to 1 Pa: 60 dB
• A-weighted equivalent SPL: approx. 26 dB
• Supply voltage: 15-48 V phantom power
• Consumption: approx. 5.6mA
• Connection: switchcraft Tini Q-G mini-plug
  • TB23M (MP367); TB5M (MPC 67 RC)
• Max. SPL (f = 1 kHz, k < 1%): 121 dB
• Dimensions (LxWxH): 105 x 76 x 25 mm
• Weight (without cable): 140 g