Product Overview
The Focusrite RedNet HD32R is a 1U, 19" rack-mount Dante interface that allows Pro Tools|HD users direct access to the full benefits of the Dante digital audio networking system, including its uniquely flexible network topology and premium quality audio interfaces. The Pro Tools system (sold separately) is connected to the HD32R via standard Mini DigiLink ports.
From complex multi-room systems to single installations Dante and RedNet offer the ability to create a sophisticated and comprehensive high-quality audio production environment around a standard Ethernet network, with HD32R providing the bridge to any Pro Tools|HD system. Assign any available Dante source or destination via HD32R and it appears in Pro Tools exactly as it would with any other Pro Tools-compatible interface, maintaining traditional Pro Tools workflows.
Features
- Allows Dante Ethernet-based audio networking products to interoperate fully with Pro Tools|HD & Pro Tools|HDX
- Ethernet and power supply redundancy with auto switchover in case of failure and locking connectors
- Provides the vital link to create an extensive high-quality audio network based on standard Cat 5e or Cat 6 wiring, bringing the latest advances in digital audio networking to Pro Tools|HD
- Cost-effectively increase audio I/O quality and flexibility with RedNet interfaces
- Permits multiple workstations to access the same interface hardware and I/O
- No changes to Pro Tools workflow required – simple, logical assignment of RedNet I/O to Pro Tools|HD inputs and outputs
- Up to 32 I/O with Pro Tools|HD over single DigiLink connection per RedNet HD32R
- Additional Avid/Digidesign interfaces may be connected to expansion ports
- Upgrade to RedNet interfaces while remaining fully compatible with TDM or AAX-DSP-based plugins and saved sessions
Specifications
- Connectors (Rear panel):
- 2x etherCON locking Ethernet connectors – also compatible with standard RJ45 connectors
- 2x BNC Word Clock In and Out
- 2x BNC Loop Sync I/O Primary and Expansion Mini DigiLink connectors to/from Pro Tools|HD system
- 2x IEC power connector: 100–240Vac, 50/60 Hz, cord retaining clips included
- Controls (front panel): Power on/off
- Indicators (front panel):
- Green LED power indicator
- Network Status: Primary/Secondary/Locked
- PSU: A/B
- Sample Rate: 44.1/48kHz, x2, x4, Pull
- Signal Presence: From/to DAW, LED per 4 channels
- Clock Source: Internal, Loop Sync, Word Clock, DAW Master
- Supported Systems (Requires Pro Tools|HD 8.0 and up):
- Pro Tools|HD PCIe
- Pro Tools|HDX
- Pro Tools|HD Native PCIe
- Pro Tools|HD Native Thunderbolt
- Computer Connectivity:IP Network
- Form Factor:Rackmount
- Simultaneous I/O:8 x 8
- A/D Resolution:Up to 24-bit/192kHz
- Built In DSP/FX:Yes
- Analog Inputs:8 x XLR
- Data I/O:2 x etherCON Ethernet
- Number of Preamps:8
- Phantom Power:Yes
- Rack Spaces:1U
- Height:1.75"
- Width:19"