(0)

Questions? Call Us:
866-334-8859

Peavey IPR2 5000
Rackmount Stereo Power Amplifier, 1700W Per Channel at 4 Ohms

OUR PART #  IPR2-5000

Our Price: $899.99
List Price: $1,499.99
You save 40%! (Low Price Guarantee)
Usually ships in 7-14 business days.
Need it sooner? Call us!

The Peavey IPR2 5000 2-channel power amplifier boasts 1700 Watts per channel at 4 Ohms and is designed for years of reliable, flawless operation under rigorous use. The groundbreaking IPR2 series features an advanced design that allows Peavey engineers to dramatically reduce weight while increasing output power, reliability and thermal efficiency. IPR2 Series amplifiers are designed with a resonant switch-mode power supply and a high-speed class 'D' topology that yields the highest audio resolution and efficiency available. This amplifier offers the sonic superiority and unsurpassed reliability for which Peavey is famous, in an extremely efficient and lightweight design. Advanced technology and extensive protection circuitry allow operation with greater efficiency into difficult loads and power conditions. The DDT™ (Distortion Detection Technique) circuitry ensures trouble-free operation into loads as low as 2 Ohms. DDT protects drivers and ensures that sonic integrity is maintained, even in extreme overload conditions. The IPR2's high-efficiency design allows the amplifier to operate at very low temperatures, and does not require massive heat sinks to cool.

Peavey IPR2 5000 Features:

  • 2 channel independent, fourth-order Linkwitz-Riley crossovers
  • DDT protection
  • Revolutionary IPR class D topology
  • Detented input controls
  • Combination XLR 1/4" inputs
  • 4 pole twist lock output connectors
  • Ultra-light weight
  • Individual signal pass 1/4" jacks on each channel
  • LED illuminated
  • Standby, LED power present indication

Peavey IPR2 5000 Specifications:

  • Rated Watts 2ch x 2 Ohms: 3230 Watts 20ms repetitive burst / 2530 Watts 1% THD both channels driven @ 1 kHz
  • Rated Watts 2ch x 4 Ohms: 1985 Watts 20ms repetitive burst / 1700 Watts 1% THD / 1470 Watts 0.15% THD, both channels driven @ 1 kHz
  • Rated Watts 2ch x 8 Ohms: 1175 Watts 20ms repetitive burst / 1025 Watts 1% THD / 880 Watts 0.15% THD, both channels driven @ 1 kHz
  • Minimum Load Impedance: 2 Ohms
  • Maximum RMS Voltage Swing: 105 volts
  • Frequency Response: 20 Hz - 22 kHz; ± 0.5dB at 1 Watt
    • 20 Hz - 20 kHz 2ch x 2 Ohms: < 0.5% @ 2250 Watts 20 Hz to 4 kHz, decreasing to 1640 Watts @ 20 kHz, both channels driven
    • 20 Hz - 20 kHz 2ch x 4 Ohms: < 0.15% @ 1400 Watts 20 Hz to 10 kHz, decreasing to 1350 Watts @ 20 kHz, both channels driven
    • 20 Hz - 20 kHz 2ch x 8 Ohms: < 0.15% @ 860 Watts 20 Hz to 4 kHz, increasing to 1000 Watts @ 20 kHz, both channels driven.
  • Input CMRR: > -75dB @ 1 kHz.
  • Voltage Gain: x40 (+32dB)
  • Crossover: 100 Hz switchable 2nd order high pass and 3rd low pass per channel.
  • Crosstalk: > -60dB @ 1kHz @ 700 Watts power @ 8 Ohms.
  • Hum and Noise: > -105dB, “A” weighted referenced to rated power @ 4 Ohms.
  • Slew Rate: > 12V/us
  • Damping Factor (8 Ohms): > 210:1 @ 20 Hz - 1 kHz @ 8 Ohms
  • Input Sensitivity: 1.95 volts ± 3% for 1 kHz 4 Ohm rated power, 1.83 volts ± 3% for 1 kHz 2 Ohm rated power
  • Input Impedance: 20 kOhms, balanced and 10 kOhms unbalanced.
  • Current Draw @ 1/8 in VA (Watts): 1435 (890) @ 2 Ohms, 920 (525) @ 4 Ohms, 625 (335) @ 8 Ohms
  • Current Draw @ 1/3 in VA (Watts): 3050 (2155) @ 2 Ohms, 1880 (1200) @ 4 Ohms, 1200 (715) @ 8 Ohms
  • Idle Consumption: 195VA, 90 Watts
  • Cooling: 3 temperature dependent variable speed fans
  • Controls: 2 front panel attenuators, crossover select switch for HPF, Normal and LPF
  • Indicator LEDs: Five LED indicators per channel - Active, Signal, DDT, Temperature and DC
  • Protection: Thermal, DC, subsonic, incorrect loads, under and over voltage
  • Connectors Inputs: Dual combination 1/4” XLR, Outputs: Dual 1/4” thru, one 2-pin & one 4 pin twist-lock connector
  • Construction: 0.062” thick aluminum
  • Dimensions: 3.5” x 19” x 17” behind front panel + 0.6” for handle
  • Net Weight: 13.6 lbs (6.2 kg)

Peavey IPR2 5000
Rackmount Stereo Power Amplifier, 1700W Per Channel at 4 Ohms

OUR PART #  IPR2-5000

Product Information:

The Peavey IPR2 5000 2-channel power amplifier boasts 1700 Watts per channel at 4 Ohms and is designed for years of reliable, flawless operation under rigorous use. The groundbreaking IPR2 series features an advanced design that allows Peavey engineers to dramatically reduce weight while increasing output power, reliability and thermal efficiency. IPR2 Series amplifiers are designed with a resonant switch-mode power supply and a high-speed class 'D' topology that yields the highest audio resolution and efficiency available. This amplifier offers the sonic superiority and unsurpassed reliability for which Peavey is famous, in an extremely efficient and lightweight design. Advanced technology and extensive protection circuitry allow operation with greater efficiency into difficult loads and power conditions. The DDT™ (Distortion Detection Technique) circuitry ensures trouble-free operation into loads as low as 2 Ohms. DDT protects drivers and ensures that sonic integrity is maintained, even in extreme overload conditions. The IPR2's high-efficiency design allows the amplifier to operate at very low temperatures, and does not require massive heat sinks to cool.

Peavey IPR2 5000 Features:

  • 2 channel independent, fourth-order Linkwitz-Riley crossovers
  • DDT protection
  • Revolutionary IPR class D topology
  • Detented input controls
  • Combination XLR 1/4" inputs
  • 4 pole twist lock output connectors
  • Ultra-light weight
  • Individual signal pass 1/4" jacks on each channel
  • LED illuminated
  • Standby, LED power present indication

Peavey IPR2 5000 Specifications:

  • Rated Watts 2ch x 2 Ohms: 3230 Watts 20ms repetitive burst / 2530 Watts 1% THD both channels driven @ 1 kHz
  • Rated Watts 2ch x 4 Ohms: 1985 Watts 20ms repetitive burst / 1700 Watts 1% THD / 1470 Watts 0.15% THD, both channels driven @ 1 kHz
  • Rated Watts 2ch x 8 Ohms: 1175 Watts 20ms repetitive burst / 1025 Watts 1% THD / 880 Watts 0.15% THD, both channels driven @ 1 kHz
  • Minimum Load Impedance: 2 Ohms
  • Maximum RMS Voltage Swing: 105 volts
  • Frequency Response: 20 Hz - 22 kHz; ± 0.5dB at 1 Watt
    • 20 Hz - 20 kHz 2ch x 2 Ohms: < 0.5% @ 2250 Watts 20 Hz to 4 kHz, decreasing to 1640 Watts @ 20 kHz, both channels driven
    • 20 Hz - 20 kHz 2ch x 4 Ohms: < 0.15% @ 1400 Watts 20 Hz to 10 kHz, decreasing to 1350 Watts @ 20 kHz, both channels driven
    • 20 Hz - 20 kHz 2ch x 8 Ohms: < 0.15% @ 860 Watts 20 Hz to 4 kHz, increasing to 1000 Watts @ 20 kHz, both channels driven.
  • Input CMRR: > -75dB @ 1 kHz.
  • Voltage Gain: x40 (+32dB)
  • Crossover: 100 Hz switchable 2nd order high pass and 3rd low pass per channel.
  • Crosstalk: > -60dB @ 1kHz @ 700 Watts power @ 8 Ohms.
  • Hum and Noise: > -105dB, “A” weighted referenced to rated power @ 4 Ohms.
  • Slew Rate: > 12V/us
  • Damping Factor (8 Ohms): > 210:1 @ 20 Hz - 1 kHz @ 8 Ohms
  • Input Sensitivity: 1.95 volts ± 3% for 1 kHz 4 Ohm rated power, 1.83 volts ± 3% for 1 kHz 2 Ohm rated power
  • Input Impedance: 20 kOhms, balanced and 10 kOhms unbalanced.
  • Current Draw @ 1/8 in VA (Watts): 1435 (890) @ 2 Ohms, 920 (525) @ 4 Ohms, 625 (335) @ 8 Ohms
  • Current Draw @ 1/3 in VA (Watts): 3050 (2155) @ 2 Ohms, 1880 (1200) @ 4 Ohms, 1200 (715) @ 8 Ohms
  • Idle Consumption: 195VA, 90 Watts
  • Cooling: 3 temperature dependent variable speed fans
  • Controls: 2 front panel attenuators, crossover select switch for HPF, Normal and LPF
  • Indicator LEDs: Five LED indicators per channel - Active, Signal, DDT, Temperature and DC
  • Protection: Thermal, DC, subsonic, incorrect loads, under and over voltage
  • Connectors Inputs: Dual combination 1/4” XLR, Outputs: Dual 1/4” thru, one 2-pin & one 4 pin twist-lock connector
  • Construction: 0.062” thick aluminum
  • Dimensions: 3.5” x 19” x 17” behind front panel + 0.6” for handle
  • Net Weight: 13.6 lbs (6.2 kg)
Add to Cart

We're sorry, only of this item available



Call a Sales Pro at 800-356-5844 for more information

© 2016 Full Compass Systems, LTD  9770 Silicon Prairie Parkway, Madison, WI 53593  All rights reserved.

We are not responsible for typographical errors in pricing or product specification
inaccuracies in our catalog or web site. Prices are subject to change without notice.