ESE ES-943U Time Code Remote Display with Red Display

TecNec offers the ES-943U, a Time Code display featuring 4.0" bright red LED displays. The unit is housed in a black-textured aluminum wall-mount enclosure (7" H x 26" W x 3.5" D). The unit accepts, via the rear-mounted terminal block, either ESE Time Code (TC76T, TC89T, or TC90T) or SMPTE/EBU Time Code. RS-232C ASCII Time Code (format "0", "1" or "A" at 9600 baud) may be input via the rear-mounted 9-pin connector. The ES-943U will automatically determine which code is being received. A rear-mounted DIP switch is used to configure the display for 12 or 24 Hour format, or to display the Date instead of time-of-day (if incoming time code contains Date information, such as ESE TC90, date-encoded SMPTE/EBU or ASCII formats "1" or "A"). If the Time Zone option is ordered, a rear-accessible DIP switch is installed for this function. If receiving ESE Time Code from a timer, the unit will display Minutes, Seconds and Tenths of Seconds (if the timer has the Tenths option).

ES-943U Features:

• Wall Mount Display
• Reads SMPTE/EBU, ASCII & ESE Time Code
• Automatic Code Detection
• Six 4.0" Red LED Displays
• Viewing Distance 120'
• Switchable Between 12 & 24 Hour Format Display
• Switchable to Date display
• Optional Time Zone Offset
• Product Options:
• Red, Amber, Green or Blue LED Displays
• Ceiling/Wall Mount Bracket
• 220 VAC/50 Hz Operation: The unit is configured to operate from 220 VAC line voltage. 117 VAC 50/60 Hz is standard.
• NTP Client: NTP Client Displays synchronize exclusively with an NTP server (replaces all standard inputs).
• POE - Receives 48V operating power via Ethernet cable.
• Time Zone Offset: Internal DIP switch allows the hours (and half-hour) to be independently offset to any time zone.
• "UL" Approved Power Supply: The unit is supplied with a UL/CSA approved wall mount power supply.
• 3-Wire Power Cord: Recommended where static charges can occur. Standard on many units, otherwise a 2-wire cord is supplied.