ETC Source Four LED Series 2 Daylight HD 4000-6500K LED Ellipsoidal Engine with Shutter Barrel and Bare End Cable

OUR PART #: S4LEDS2DHDS-0-X MFR #: 7461A1071-0X

Copied to clipboard

The Source Four LED Series 2 is part of ETC's evolution in the field of LED lighting. ...Read more

ETC Source Four LED Series 2 Daylight HD 4000-6500K LED Ellipsoidal Engine With Shutter Barrel And Bare End Cable Image 1
ETC Source Four LED Series 2 Daylight HD 4000-6500K LED Ellipsoidal Engine With Shutter Barrel And Bare End Cable
No longer available at Full Compass
We've left this page up for reference only.

Questions? Contact our
Sales and Service Pros for expert
advice and package pricing.

800-356-5844

Email customer service

Product Overview

The Source Four LED Series 2 is part of ETC's evolution in the field of LED lighting. While this high-output non-variable while light fixture may look the same on the outside, the Series 2 offers even more of what makes the Source Four LED one of the best LED profile luminaires available. This version, the S4LEDS2DHDS-0-X features a Daylight HD light engine that comes with a shutter barrel all in the color black and offers a Bare-End (no connector) power input cable.

With optimized arrays and finely-tuned electronics, the Series 2 offers a combination of light quality and output that is tough to match. The Source Four LED Series 2 Daylight HD array is designed for broadcast lighting, offering flicker-free operation and high-definition lighting. With a new mix of LED emitters, the luminaires output is significantly brighter than the original Source Four LED white-light arrays. The Daylight HD array produces variablecool white (4000 to 6500K) light that imitates natural daylight. It offers tint control, so it can be tweaked to perfectly illuminate individual skin tones.

Series 2 light engines work with all Source Four lens tubes to deliver a high-quality, controllable beam of LED light. For the best results, it is highly recommended that EDLT versions are used. ETC also offers a special LED-only version of the 50° lens tube.

ETC S4LEDS2DHDS-0-X Features:

  • 60 Luxeon® Rebel LED emitters
  • 20,000-hour L70 Rating
  • 3 arrays: Lustr, Daylight HD and Tungsten HD
  • Includes slots for glass or stainless steel patterns and soft focus diffuser
  • Accessory slot for motorized pattern devices or optional iris
  • Power and DMX in/thru connections for easy setup
  • Up to nine fixtures (15A max) may be linked via powerthru connector (10 fixtures total per circuit) when used with R20 Relay Moduleor Unison Echo Relay Panel.
  • DMX512 in/thru via five-pin XLRconnectors
  • Multiple control options, including RGB, strobe, and console-free Master/Slave mode
  • 15-bit virtual dimming engine for smooth fades and minimal color shift during dimming
  • ETL Listed to UL1573; IP20 rated
  • Available in black (standard), white or silver, or custom fixture-body colors
  • Notes about LED Luminaires: All LED sources experience some lessening of light output and some colorshift over time. LED output will vary with thermal conditions. Based on the LED manufacturer’s B50 L70 specification, a Source Four LED Series 2 luminaire will achieve ~70% of its initial output after 20,000 hours of typical usage. In individual situations, LEDs will be used for different durations and at different levels. This can eventually lead to minor alterations in color performance, necessitating slight adjustments to presets, cues or programs.

Note:

This fixture is for use with fixed-field lens tubes only

Product shown in image is for illustrative purposes only. Actual product may vary in appearance.

See Attached for Product Specifications

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Product Documents

Click to download