(0)

Questions? Call Us:
800-356-5844

Crest Pro-LITE 5.0
2-Channel 2025 Watts at 4 Ohms Power Amplifier

OUR PART #:  PRO-LITE-5.0

Designed for years of reliable, flawless operation under rigorous use, the Crest Audio Pro-LITE 5.0 utilizes an advanced design that dramatically reduces weight...
Learn More
Our Price: $838.60
List Price: $1,198.00
You save 30%!

Full Compass offers free ground shipping on thousands of stock and non-stock (special order) items for orders placed on this web site and shipping in the continental US (48 states).

Learn More

Free Shipping

Available

We guarantee to match pricing on the products we sell for new, identical and immediately available products if you see them offered at a lower price. Please contact us if you find a lower price before purchasing.

Learn More

Low Price

Guaranteed

Crest Pro-LITE 5.0
Qty:
Please call for availability.

Similar Products

Designed for years of reliable, flawless operation under rigorous use, the Crest Audio Pro-LITE 5.0 utilizes an advanced design that dramatically reduces weight, while increasing output power, reliability and thermal efficiency. The Pro-LITE 5.0 amplifier is also designed with a resonant switch-mode power supply and a highspeed class D topology, that yields the highest audio resolution and efficiency available. This amplifier offers the sonic superiority and unsurpassed reliability for which Crest is famous, in an extremely efficient and lightweight design. Advanced technology and extensive protection circuitry allow operation with greater efficiency into difficult loads and power conditions. In other words, you get an amazingly powerful and efficient amplifier that won’t break your budget or your back! The ACL (Automatic Clip Limiting) circuitry ensures trouble-free operation into loads as low as 2 Ohms. ACL protects drivers and ensures that sonic integrity is maintained, even in extreme overload conditions. The Pro-LITE 5.0’s high-efficiency design allows the amplifier to operate at very low temperatures and does not require massive heat sinks to cool.

Crest Audio Pro-LITE 5.0 Specifications:

  • Rated Watts 2ch x 2 Ohms: 3300 Watts 20ms repetitive burst / 2600 Watts 1% THD both channels driven @ 1 kHz.
  • Rated Watts 2ch x 4 Ohms: 2025 Watts 20ms repetitive burst / 1725 Watts 1% THD / 1500 Watts 0.2% THD, both channels driven @ 1 kHz.
  • Rated Watts 2ch x 8 Ohms: 1175 Watts 20ms repetitive burst / 1000 Watts 1% THD / 825 Watts 0.2% THD, both channels driven @ 1 kHz
  • Minimum Load Impedance: 2 Ohms
  • Maximum RMS Voltage Swing: 105 Volts
  • Frequency Response: 
    • 20 Hz - 22 kHz; +/- 0.5 dBat 1 Wat
    • 20 Hz - 20 kHz 2ch x 2 Ohms - < 0.5% @ 2250 Watts 20 Hz to 4 kHz, decreasing to 1650 Watts @ 20 kHz, both channels driven
    • 20 Hz - 20 kHz 2ch x 4 Ohms - < 0.15% @ 1400 Watts 20 Hz to 10 kHz, decreasing to 1350 Watts @ 20 kHz, both channels driven
    • 20 Hz - 20 kHz 2ch x 8 Ohms - < 0.15% @ 860 Watts 20 Hz to 4 kHz, increasing to 1000 Watts @ 20 kHz, both channels driven
  • Input CMRR: > - 75dB @ 1 kHz
  • Voltage Gain: x 40 (+32dB)
  • Crossover: 100 Hz switchable 2nd order high pass and 3rd low pass per channel.
  • Crosstalk: > -60dB @ 1kHz @ 700 watts power @ 8 Ohms.
  • Hum and Noise: > -105dB, "A" weighted referenced to rated power @ 4 Ohms.
  • Slew Rate: > 12V/µs
  • Damping Factor (8 Ohms): > 210:1 @ 20 Hz - 1kHz @ 8 Ohms
  • Phase Response: +5° to -91° from 20 Hz to 20 kHz
  • Input Sensitivity: 1.95 volts +/- 3% for 1 kHz 4 Ohm rated power, 1.83 volts +/- 3% for 1 kHz 2 Ohm rated power
  • Input Impedance: 20 kOhms balanced and 10 kOhms unbalanced.
  • Current Draw @ 1/8 in VA (watts): 1435 (890) @2 Ohms, 920 (525) @ 4 Ohms, 625 (335) @ 8 Ohms
  • Current Draw @ 1/3 in VA (watts): 3050 (2155) @2 Ohms, 1880 (1200) @ 4 Ohms, 1200 (715) @ 8 Ohms
  • Idle Consumption: 195VA, 90 watts.
  • Cooling: 3 temperature dependent variable speedfans.
  • Controls: 2 front panel attenuators, crossover select switch for HPF, Normal and LPF
  • Indicator LEDs: Five LED indicators per channel: Active, Signal, DDT, Temperature and DC
  • Protection: Thermal, DC, subsonic, incorrect loads, under and over voltage
  • Connectors:
    • Inputs: Dual combination 1/4” XLR
    • Outputs: Dual 1/4” thru, one 2-pin & one 4 pin twist-lock connector
  • Construction: 0.062” thick aluminum
  • Dimensions: 3.5” x 19” x 17” behind front panel+ 0.6” for handle
  • Net Weight: 13.6 lbs (6.2 kg)
Add to Cart

We're sorry, only of this item available



Call a Sales Pro at 800-356-5844 for more information

© 2017 Full Compass Systems, LTD  9770 Silicon Prairie Parkway, Madison, WI 53593  All rights reserved.

We are not responsible for typographical errors in pricing or product specification
inaccuracies in our catalog or web site. Prices are subject to change without notice.