OUR PART # OPTI-FLECS-9406-1030
Rosco Laboratories' OPTI-FLECS 9406-1030 - part of the OPTI-FLECS series - is a 30cm x 30cm control filter especially designed for low-heat LED light sources, featuring the "Bastard Amber" Color, 68.70% Transmission, and -.4 Stop-Loss (minimum).
Rosco OPTI-FLECS Series
The more prevalent LEDs and Solid State lighting becomes in our marketplace, the stronger the demand for solutions to the inherent light-output issues that accompany this technology becomes. White LEDs of any color temperature often contain an overabundance of green light energy and lack the critical parts of the spectrum that make light attractive on skin tones and architectural surfaces. A common description of LED light is that it looks "sterile" or "flat" and that illuminated objects or people appear sallow or lifeless.
This range of 21 semi-rigid plastic filters enhances the quality of solid-state lighting - sources that are typically less flattering and more difficult to properly control and shape. OPTI-FLECS filters represent the next generation of lighting control filters from Rosco. The OPTI-FLECS palette is comprised of diffusions and beam control filters to soften or shape the light output. In addition, a family of color corrections, tints and neutral density filters target specific spectral spikes and result in a more pleasing color quality. Taken together, the OPTI-FLECS range provides lighting professionals with the solutions they need for virtually any LED lighting application.
OPTI-FLECS consists of various diffusion and color filters to control and enhance the light produced by solid state, LED fixtures.
The OPTI-FLECS diffusion range allows users to control the output of a white or color-mixing LED fixture by softening, blending or spreading its beam. These filters are also helpful in reducing glare from harsh, overly-directional fixtures.
The colors in the OPTI-FLECS range are carefully selected tints and hues that filter out the problematic spectral spikes inherent in the output of most white LEDs - allowing the most attractive wavelengths to shine through.
OPTI-FLECS is available in 30cm x 30cm and 60cm x 60cm sheets and can be customized to fit the color and size requirements of your job.
OPTI-FLECS is available in 21 standard diffusions and colors that are available in two standard sizes: 30cm x 30cm and 60cm x 60cm. The material is 13 mil (0.013 inches, .33mm) thick. The semi-rigid nature of the product offers a protected, reusable filter solution that can be inserted into a multitude of LED fixtures used on-stage, in broadcast studios or in architectural installations.
OPTI-FLECS in Architectural Installations
The OPTI-FLECS range of LED filters is an excellent choice to aid in the design of an architectural project. OPTI-FLECS can be used to enhance skin tones of customers in a retail store, balance the output of LEDs with other sources or reduce glare and hotspots inside a display case.
OPTI-FLECS for Film/TV/Broadcast/Photography
The low-heat feature of LED lights means that gel is not an expendable any more - it's an accessory, just like a scrim or a barn-door. OPTI-FLECS is a semi-rigid filter that offers cinematographers, photographers, gaffers, and lighting directors a durable, reusable solution for correcting the problematic color-rendering aspects of LED lighting. The CTO's, Minusgreens and Neutral Densities are excellent tools for balancing LED lights - notably the green spike that traditional Minusgreens don't properly address. The diffusions and tints are perfect for softening the harsh output of an LED source and for enhancing the skin tones of on-screen/on-image talent.
• For best results, install the filter as far away from the emitter as possible.
• Install the diffusions with the smooth side facing the source.
Care & Maintenance:
• Color filters and Powder Frost may be cleaned with mild soap and clean water.
• Other diffusions may be cleaned with mild soap and clean water on smooth side.
NOTE: This product is intended for use on low-heat LED sources only, and is not suitable for use on high heat fixtures. OPTI-FLECS filters are designed to be installed externally and are not intended to be used as an internal fixture component where higher operating temperatures may be present.
NOTE: Color sample shown is for illustrative purposes only, and may vary from actual product. Consult with a Sales Professional for more information.
Rosco Laboratories OPTI-FLECS Features/Benefits:
Rosco Laboratories OPTI-FLECS 9406-1030 Specifications:
Click to download