Product Overview
The APC SMT3000RMUS is a smart uninterruptible power supply with 2700 Watts / 2880VA, 120V input and output and USB interface port for managing the UPS via software.
APC SMT3000RMUS Features:
- StruxureWare Central compatible: Enables centralized management via StruxureWare Central.
- Predicitive failure notification: Provides early-warning fault analysis ensuring proactive component replacement.
- Sine wave output: Eliminates humming and heat generated when powering tubelights and fans.
- LED Indicators: Provide easy-to-read status of the unit and utility power conditions.
- Boost and Trim Automatic Voltage Regulation (AVR): Eliminates voltage fluctuations as a source of AV signal degradation and component power-supply stress.
- Serial connectivity: Use any Home Automation network to monitor and control the S20 through its RS-232 serial port. For information on how to communicate with the S20, see APC's Application Note #102. Crestron and AMX installers should visit their respective websites for information on how to integrate the S20 into those networks.
- Green mode: Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
- Energy meter: Provides actual kilowatt hours of usage for energy conscious users.
- Predictive replace battery date: Dynamically provides the month and year when battery replacement is recommended to aide in long term maintenance planning.
- Intuitive LCD interface: Provides clear and accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys.
- Single switched outlet group: Single outlet group that may be controlled separately from the UPS for discrete reboot of hung devices, sequenced on/off and non-critical load shedding.
- Pure sine wave output on battery: Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.
- Disconnected battery notification: Warns when a battery is not available to provide backup power.
- Sequenced network shutdown and reboot: Customize network shutdown and reboot sequence of connected servers and UPSs.
- Outlet group control: Turn on/off, reboot or shut down select outlet groups to save dispatching technicians to remote locations (for UPSs with switched outlet groups).
- Adjustable voltage sensitivity: Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.
- Adjustable voltage-transfer points: Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.
- Audible alarms: Provides notification of changing utility power and UPS power conditions
- Automatic restart of loads after UPS shutdown: Automatically starts up the connected equipment upon the return of utility power.
- Automatic self-test: Periodic battery self-test ensures early detection of a battery that needs to be replaced.
- Hot-swappable batteries: Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
- Network manageable: Provides remote power management of the UPS over the network.
- Battery failure notification: Provides early-warning fault analysis on batteries enabling timely preventive maintenance
- Safety-agency approved: Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
- Serial connectivity: Provides management of the UPS via a serial port.
- Temperature-compensated battery charging: Prolongs battery life by regulating the charge voltage according to battery temperature.
- USB connectivity: Provides management of the UPS via a USB port (not available on all models).
- User-replaceable batteries: Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
- Boost and Trim Automatic Voltage Regulation (AVR): Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).
- Intelligent battery management: Maximizes battery performance, life, and reliability through intelligent, precision charging.
APC SMT3000RMUS Specifications:
- Output:
- Output Power Capacity: 2700 Watts / 2880 VA
- Max Configurable Power: 2700 Watts / 2880 VA
- Nominal Output Voltage: 120V
- Output Voltage Distortion: Less than 5%
- Output Frequency (sync to mains): 50/60Hz +/- 3 Hz
- Topology: Line Interactive
- Waveform Type: Sine wave
- Output Connections:
- (6) NEMA 5-15R NEMA 5-15R
- (2) NEMA 5-20R NEMA 5-20R
- Input:
- Nominal Input Voltage: 120V
- Input Frequency: 50/60 Hz +/- 3 Hz (auto sensing)
- Input Connections: NEMA L5-30P
- Cord Length: 8 feet (2.44 meters)
- Input voltage range for main operations: 82 - 144V
- Input voltage adjustable range for mains operation: 75 - 154V
- Batteries & Runtime:
- Battery Type: Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
- Typical recharge time: 3 hour(s)
- Replacement Battery: RBC43
- RBC™ Quantity: 1
- Communications & Management:
- Interface Port(s): USB
- Available SmartSlot™ Interface Quantity: 1
- Control panel: LED status display with On Line : On Battery : Replace Battery and Overload indicators, Multi-function LCD status and control console
- Audible Alarm: Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm
- Surge Protection and Filtering: Surge energy rating - 459 Joules
- Physical:
- Maximum Height: 3.39 inches (86 mm)
- Maximum Width: 18.90 inches (480 mm)
- Maximum Depth: 26.89 inches (683 mm)
- Rack Height: 2U
- Net Weight: 97.42 lbs. (44.28 kg)
- Shipping Weight: 113.74 lbs. (51.70 kg)
- Shipping Height: 10.00 inches (254 mm)
- Shipping Width: 23.62 inches (600 mm)
- Shipping Depth: 38.60 inches (980 mm)
- Color: Black
- Environmental:
- Operating Environment: 32 - 104 °F (0 - 40 °C)
- Operating Relative Humidity: 0 - 95%
- Operating Elevation: 0-10000 feet (0-3000 meters)
- Storage Temperature: 5 - 113 °F (-15 - 45 °C)
- Storage Relative Humidity: 0 - 95%
- Storage Elevation: 0-50000 feet (0-15000 meters)
- Audible noise at 1 meter from surface of unit: 55.00 dBA
- Online Thermal Dissipation: 348.00 BTU/hr
- Conformance:
- Regulatory Approvals: CSA, ENERGY STAR (USA), FCC Part 15 Class A, UL 1778
- Standard Warranty: 3 years repair or replace (excluding battery) and 2 year for battery
- Equipment protection policy: Lifetime - $150000
- Sustainable Offer Status:
- RoHS: Compliant
- REACH: Contains No SVHCs