(0)

Questions? Call Us:
866-334-8859

SKB Cases 3i-20117SLR2
iSeries 2011-7 Two DSLR with Lenses Case

OUR PART #  3I-20117SLR2

Our Price: $199.99
List Price: $339.00
You save 41%! (Low Price Guarantee)
Usually ships in 7-14 business days.
Need it sooner? Call us!

Recommended Accessories

The SKB iSeries 20117SLR2 Case (3i-20117SLR2) is the ideal case for wedding and event photographers. It was designed to fit two camera bodies with a 24-70mm and 70-200mm lens attached. The case was designed with removable blocks so that the case will accommodate camera bodies with or without battery grips. The perfect fit for a Canon 5D and 1D owner as well as someone who owns a Nikon D800 or any combination. Sections for a flash, lens hood or lens, memory cards and accessory compartments are included as well. This case is the maximum approved size for airline carry on travel. This case has wheels and a pull out handle for easy transport.

This iSeries DSLR Case, (3i-20117SLR2) has trigger release latches for quick but secure access. This custom waterproof case is made in the USA and is backed by SKB’s Unconditional Lifetime Warranty.

About the SKB iSeries
SKB's iSeries injection molded waterproof cases are constructed of ultra high-strength polypropylene copolymer resin and feature a gasketed, waterproof, submersible design (IP67) that is resistant to corrosion and impact damage. Its continuous molded-in hinge, patented "trigger release" latch system, comfortable, snap-down rubber over-molded cushion grip handle, secure stacking, and automatic ambient pressure equalization valve (MIL-STD-648C) all contribute to its military grade design.


SKB 3i-20117SLR2 Features:

  • Custom cut PE foam to fit up to two DSLR bodies with 24-70mm and 70-200 lens attached, lens hoods, flash, batteries, memory cards and additional accessories
  • Removable foam sections to fit camera bodies (e.g. cameras with battery grips or pro sized bodies)
  • Pull out handle and wheels
  • Unconditional Lifetime Warranty
  • Ultra high-strength polypropylene copolymer resin
  • UV, solvent, corrosion and fungus resistant (MIL-STD-810F)
  • Complete gasket seal makes these cases absolutely watertight (MIL-STD-C-4150J)
  • Automatic ambient pressure equalization valve (MIL-STD-648C & IP67)
  • Resistant to corrosion and impact damage
  • Molded-in hinge
  • Rubber over-molded cushion grip handle
  • Locking loops for a customer supplied lock
  • Patented "trigger release" latch system

SKB 3i-20117SLR2 Specifications:

  • Exterior Length:  21.89 in (55.60 cm)
  • Exterior Width:  13.96 in (35.46 cm)
  • Exterior Depth:  9.00 in (22.86 cm)
  • Carton Length:  22.25 in (56.52 cm)
  • Carton Width:  14.50 in (36.83 cm)
  • Carton Depth:  9.50 in (24.13 cm)
  • Lid Depth:  2.00 in (5.08 cm)
  • Base Depth:  5.50 in (13.97 cm)
  • Shipping Weight:  13.10 lbs. (5.94 kg)
  • Product Weight:  11.80 lbs. (5.35 kg)

Lifetime Warranty

SKB brand hardshell cases are fully warranted against defects in materials and craftsmanship for the life of the case to the original owner. That means, if your case breaks, SKB will supply replacement parts, repair the case, or replace your case for as long as you own it. Proof of Purchase is required for all warranty claims. Electronic components in SKB brand hardshell pedalboard systems are warranted for five years from date of purchase. Soft cases and gig bags are warranted for one year from date of purchase. SKB is not responsible for the shipping cost to our facility. However, SKB will cover all of the costs of repairs and/or replacements, as well as the return shipping. To request a return authorization for a warranty claim or field replaceable parts, please contact our customer service department through our online Support Request form. SKB hardshell cases are warranted for life to the original owner only. Cases for rental purposes, modified or used cases are not covered by this warranty.

iSeries Lid Organizer for 20"x11" CasesSKB Cases 3i-LO2011-1 iSeries Lid Organizer for 20"x11" Cases

SKB's 3i-LO2011-1 Lid Organizer provides convenient organization inside SKB iSeries 2011 cases. This mesh organizer attaches to the interior lid of the case with velcro type tape, and features four mesh pockets for easy viewing with ...

In Stock

Free Shipping Available

Our Price:$39.99List Price: $69.99You save 43%!

SKB Cases 3i-20117SLR2
iSeries 2011-7 Two DSLR with Lenses Case

OUR PART #  3I-20117SLR2

Product Videos:

Product Information:

The SKB iSeries 20117SLR2 Case (3i-20117SLR2) is the ideal case for wedding and event photographers. It was designed to fit two camera bodies with a 24-70mm and 70-200mm lens attached. The case was designed with removable blocks so that the case will accommodate camera bodies with or without battery grips. The perfect fit for a Canon 5D and 1D owner as well as someone who owns a Nikon D800 or any combination. Sections for a flash, lens hood or lens, memory cards and accessory compartments are included as well. This case is the maximum approved size for airline carry on travel. This case has wheels and a pull out handle for easy transport.

This iSeries DSLR Case, (3i-20117SLR2) has trigger release latches for quick but secure access. This custom waterproof case is made in the USA and is backed by SKB’s Unconditional Lifetime Warranty.

About the SKB iSeries
SKB's iSeries injection molded waterproof cases are constructed of ultra high-strength polypropylene copolymer resin and feature a gasketed, waterproof, submersible design (IP67) that is resistant to corrosion and impact damage. Its continuous molded-in hinge, patented "trigger release" latch system, comfortable, snap-down rubber over-molded cushion grip handle, secure stacking, and automatic ambient pressure equalization valve (MIL-STD-648C) all contribute to its military grade design.


SKB 3i-20117SLR2 Features:

  • Custom cut PE foam to fit up to two DSLR bodies with 24-70mm and 70-200 lens attached, lens hoods, flash, batteries, memory cards and additional accessories
  • Removable foam sections to fit camera bodies (e.g. cameras with battery grips or pro sized bodies)
  • Pull out handle and wheels
  • Unconditional Lifetime Warranty
  • Ultra high-strength polypropylene copolymer resin
  • UV, solvent, corrosion and fungus resistant (MIL-STD-810F)
  • Complete gasket seal makes these cases absolutely watertight (MIL-STD-C-4150J)
  • Automatic ambient pressure equalization valve (MIL-STD-648C & IP67)
  • Resistant to corrosion and impact damage
  • Molded-in hinge
  • Rubber over-molded cushion grip handle
  • Locking loops for a customer supplied lock
  • Patented "trigger release" latch system

SKB 3i-20117SLR2 Specifications:

  • Exterior Length:  21.89 in (55.60 cm)
  • Exterior Width:  13.96 in (35.46 cm)
  • Exterior Depth:  9.00 in (22.86 cm)
  • Carton Length:  22.25 in (56.52 cm)
  • Carton Width:  14.50 in (36.83 cm)
  • Carton Depth:  9.50 in (24.13 cm)
  • Lid Depth:  2.00 in (5.08 cm)
  • Base Depth:  5.50 in (13.97 cm)
  • Shipping Weight:  13.10 lbs. (5.94 kg)
  • Product Weight:  11.80 lbs. (5.35 kg)

Lifetime Warranty

SKB brand hardshell cases are fully warranted against defects in materials and craftsmanship for the life of the case to the original owner. That means, if your case breaks, SKB will supply replacement parts, repair the case, or replace your case for as long as you own it. Proof of Purchase is required for all warranty claims. Electronic components in SKB brand hardshell pedalboard systems are warranted for five years from date of purchase. Soft cases and gig bags are warranted for one year from date of purchase. SKB is not responsible for the shipping cost to our facility. However, SKB will cover all of the costs of repairs and/or replacements, as well as the return shipping. To request a return authorization for a warranty claim or field replaceable parts, please contact our customer service department through our online Support Request form. SKB hardshell cases are warranted for life to the original owner only. Cases for rental purposes, modified or used cases are not covered by this warranty.

iSeries Lid Organizer for 20"x11" CasesSKB Cases 3i-LO2011-1 iSeries Lid Organizer for 20"x11" Cases

SKB's 3i-LO2011-1 Lid Organizer provides convenient organization inside SKB iSeries 2011 cases. This mesh organizer attaches to the interior lid of the case with velcro type tape, and features four mesh pockets for easy viewing with ...

In Stock

Free Shipping Available

Our Price:$39.99List Price: $69.99You save 43%!

Add to Cart

We're sorry, only of this item available



Call a Sales Pro at 800-356-5844 for more information

© 2016 Full Compass Systems, LTD  9770 Silicon Prairie Parkway, Madison, WI 53593  All rights reserved.

We are not responsible for typographical errors in pricing or product specification
inaccuracies in our catalog or web site. Prices are subject to change without notice.