Call Us for your best package
pricing and product availability.
OUR PART #: RSM-SS24 MFR #: RSM-SS24
You've invested in your microphone and audio system, so the last problem you want to deal with is unwanted vibrations and sounds when using an inferior placement setup. ...Read more
Questions? Contact our
Sales and Service Pros for expert
advice and package pricing.
Email customer service
You've invested in your microphone and audio system, so the last problem you want to deal with is unwanted vibrations and sounds when using an inferior placement setup. Utilizing springs and nylon cords, the Sling-Shock™ (Patent No. 8,571,250) from Royer Labs is a revolutionary departure from traditional shockmount designs. They’ve done away with unreliable rubberized parts and elastic cords, producing a durable shockmount that provides exceptional isolation from vibration, rumble and resonances. Royer's proprietary system of non-resonant nylon cable and damped steel springs acts to isolate the microphone from vibrations induced from the microphone stand. These vibrations appear as rumble and/or low-grade noise across the bandwidth and are greatly reduced by use of the Sling-Shock.
Sling-Shocks also eliminate the self-resonance that traditional shockmounts can generate on high SPL applications like close-miked electric guitar. Shockmount self-resonance creates harmonic interferences at various frequencies – Sling-Shocks eliminate the issue. The Sling-Shock’s superior vibration-reduction capabilities and lack of self-resonance allow engineers to capture performances free of vibration-related interference across the bandwidth.
The RSM-SS24 Sling-Shock model accommodates Royer’s SF-2, SF-24 and SF-24V microphones, and any cylindrical microphone measuring approximately 1 ½ inch in diameter (+/- 1/8 inch). A cable clip is included on each Sling-Shock. Loop a length of cable under the microphone, then secure the cable to the mic clip to minimize cable-related vibrations.
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.