(0)

Questions? Call Us:
866-334-8859

TecNec F6N150BK-75
75 ft of 1-1/2" F6 Wrap Sleeving

OUR PART #  F6N150BK-75

Our Price: $139.57
List Price: $162.75
You save 14%! (Low Price Guarantee)
Usually ships in 7-14 business days.
Need it sooner? Call us!

F6’s unique split, semi-rigid braided construction makes it the ideal solution for situations where ease of installation is of primary importance.

The lateral split allows the tube to open up to accommodate a wide variety of bundling requirements, and the semi-rigid braid configuration simply closes around the entire installation without the need for any additional fasteners (velcro, tape, etc.)

The 10 mil PET braid is lightweight, quiet and flexible. The 25% edge overlap (at nominal diameter) allows coverage around inline plugs, connectors and splices.

F6 will bend to a tight radius without distorting or splitting open and, unlike full rigid tubing, will not impair or affect the flexibility of harnesses. F6 allows for the addition or removal of wires without disassembly.

Features:

  • The large overlap allows easy installation over splices and inline connectors without exposing wires and cables.
  • F6 is the perfect solution when harness disassembly is impossible or when frequent access to harnesses or wire bundles is necessary.
  • F6 orange is used for safety identification in both electric powered vehicles and military aircraft.
  • In the office, F6 is perfect for managing workstation cable bundles efficiently and economically.
  • Flexo F6 resists damage from common automotive and marine chemicals, saltwater and UV radiation, and is cut and abrasion resistant.

Specifications:

  • Monofilament Diameter: .008-.015 (ASTM D-204)
  • Flammability Rating: UL94
  • Recommended Cutting: Hot Knife
  • Colors: 4
  • Wall Thickness: .024-.038
  • Tensile Strength (Yarn): 6-10 Lbs. (ASTM D-2256)
  • Specific Gravity: 1.38 (ASTM D-792)
  • Moisture Absorption: .1-.2% (ASTM D-570)
  • Hard Vacuum Data (ASTM E-595):
      -  TML: 19
      - CVCM: .00
      -  WVR: .16
  • Smoke D-Max: 56 (ASTM E-662)
  • Outgassing: Med
  • Oxygen Index: 21 (ASTM D-2863)
  • Abrasion Resistance: Medium
  • Abrasion Test Machine: Taber 5150
  • Abrasion Test Wheel: Calibrase H-18
  • Abrasion Test Load: 500g
  • Room Temperature: 80°F
  • Humidity: 74%
  • Some Scuffing Visible: 500 Test Cycles
  • Significant Wear Is Visible With Several Braid Filaments Broken: 1,200 Test Cycles
  • Material Destroyed: 1,950 Test Cycles
  • Pre-Test Weight: 5,365.1 mg
  • Post-Test Weight: 4,850 mg
  • Test End Loss Of Mass Point Of Destruction: 515.1 mg
  • Flammability Rating: UL94VO
  • Melt Point: 482°F (250°C) (ASTM D-2117)
  • Maximum Continuous: 257°F (125°C) (Mil-I-23053)
  • Minimum Continuous: -94°F (-70°C)

TecNec F6N150BK-75
75 ft of 1-1/2" F6 Wrap Sleeving

OUR PART #  F6N150BK-75

Product Information:

F6’s unique split, semi-rigid braided construction makes it the ideal solution for situations where ease of installation is of primary importance.

The lateral split allows the tube to open up to accommodate a wide variety of bundling requirements, and the semi-rigid braid configuration simply closes around the entire installation without the need for any additional fasteners (velcro, tape, etc.)

The 10 mil PET braid is lightweight, quiet and flexible. The 25% edge overlap (at nominal diameter) allows coverage around inline plugs, connectors and splices.

F6 will bend to a tight radius without distorting or splitting open and, unlike full rigid tubing, will not impair or affect the flexibility of harnesses. F6 allows for the addition or removal of wires without disassembly.

Features:

  • The large overlap allows easy installation over splices and inline connectors without exposing wires and cables.
  • F6 is the perfect solution when harness disassembly is impossible or when frequent access to harnesses or wire bundles is necessary.
  • F6 orange is used for safety identification in both electric powered vehicles and military aircraft.
  • In the office, F6 is perfect for managing workstation cable bundles efficiently and economically.
  • Flexo F6 resists damage from common automotive and marine chemicals, saltwater and UV radiation, and is cut and abrasion resistant.

Specifications:

  • Monofilament Diameter: .008-.015 (ASTM D-204)
  • Flammability Rating: UL94
  • Recommended Cutting: Hot Knife
  • Colors: 4
  • Wall Thickness: .024-.038
  • Tensile Strength (Yarn): 6-10 Lbs. (ASTM D-2256)
  • Specific Gravity: 1.38 (ASTM D-792)
  • Moisture Absorption: .1-.2% (ASTM D-570)
  • Hard Vacuum Data (ASTM E-595):
      -  TML: 19
      - CVCM: .00
      -  WVR: .16
  • Smoke D-Max: 56 (ASTM E-662)
  • Outgassing: Med
  • Oxygen Index: 21 (ASTM D-2863)
  • Abrasion Resistance: Medium
  • Abrasion Test Machine: Taber 5150
  • Abrasion Test Wheel: Calibrase H-18
  • Abrasion Test Load: 500g
  • Room Temperature: 80°F
  • Humidity: 74%
  • Some Scuffing Visible: 500 Test Cycles
  • Significant Wear Is Visible With Several Braid Filaments Broken: 1,200 Test Cycles
  • Material Destroyed: 1,950 Test Cycles
  • Pre-Test Weight: 5,365.1 mg
  • Post-Test Weight: 4,850 mg
  • Test End Loss Of Mass Point Of Destruction: 515.1 mg
  • Flammability Rating: UL94VO
  • Melt Point: 482°F (250°C) (ASTM D-2117)
  • Maximum Continuous: 257°F (125°C) (Mil-I-23053)
  • Minimum Continuous: -94°F (-70°C)
Add to Cart

We're sorry, only of this item available



Call a Sales Pro at 800-356-5844 for more information

© 2016 Full Compass Systems, LTD  9770 Silicon Prairie Parkway, Madison, WI 53593  All rights reserved.

We are not responsible for typographical errors in pricing or product specification
inaccuracies in our catalog or web site. Prices are subject to change without notice.