(0)

Questions? Call Us:
866-334-8859

Ortofon Inc OM-GT-SINGLE
GT All-Purpose Tough DJ Cartridge

OUR PART #  OM-GT-SINGLE

Sale Price: $21.02
List Price: $48.99
You save 57%! (Low Price Guarantee)
In Stock

GT was developed by Ortofon in close co-operation with SWS Audio GmbH. The cartridge was named "Great and Tough" and was based on the construction of the well-known Ortofon Series 500 design - mend for standard half inch mounting - in a black housing with white printing.

The vital parts in the GT are based on a very robust and reliable parts used in Scratch. Further, during development of GT, efforts were also concentrated on supplying a very high output of 8 mV and improvement of frequency response to give higher resolution and sound image.

Tracking avility is decisive for the DJs especially when scratching and back-cuing. In this situation raise of tracking force could be an immediate, but in many cases not very effective solution. The reason is that the antiskating adjustment, if not at a very moderate level, will double the skating effect when back-cuing.

Specifications:

  • Output voltage at 1000Hz, 5cm/sec.: 8 mV
  • Channel balance at 1kHz: 1,5 dB
  • Channel separation at 1kHz: 25 dB
  • Channel separation at 15 kHz: 18 dB
  • Frequency range at -3dB: 20-20.000 Hz
  • Frequency response: 20-18.000 Hz +/- 2 dB
  • Tracking ability at 315 Hz at recommmende tracking force: 80 µm
  • Compliance, dynamic lateral: 6 µm/m N
  • Stylus type: Spherical
  • Stylus tip radius: R 18 µm
  • Tracking force range: 3,0-5,0 g (30-50 mN)
  • Tracking force recommended: 4,0 g (40 mN)
  • Tracking angle: 20°
  • Internal impedance, DC resistance: 1000 Ohm
  • Internal inductance: 580 mH
  • Recommended load resistance: 47 kOhm
  • Recommended load capacitance: 200-400 pF
  • Compatibility with the cartridges: GT

Ortofon Inc OM-GT-SINGLE
GT All-Purpose Tough DJ Cartridge

OUR PART #  OM-GT-SINGLE

Product Information:

GT was developed by Ortofon in close co-operation with SWS Audio GmbH. The cartridge was named "Great and Tough" and was based on the construction of the well-known Ortofon Series 500 design - mend for standard half inch mounting - in a black housing with white printing.

The vital parts in the GT are based on a very robust and reliable parts used in Scratch. Further, during development of GT, efforts were also concentrated on supplying a very high output of 8 mV and improvement of frequency response to give higher resolution and sound image.

Tracking avility is decisive for the DJs especially when scratching and back-cuing. In this situation raise of tracking force could be an immediate, but in many cases not very effective solution. The reason is that the antiskating adjustment, if not at a very moderate level, will double the skating effect when back-cuing.

Specifications:

  • Output voltage at 1000Hz, 5cm/sec.: 8 mV
  • Channel balance at 1kHz: 1,5 dB
  • Channel separation at 1kHz: 25 dB
  • Channel separation at 15 kHz: 18 dB
  • Frequency range at -3dB: 20-20.000 Hz
  • Frequency response: 20-18.000 Hz +/- 2 dB
  • Tracking ability at 315 Hz at recommmende tracking force: 80 µm
  • Compliance, dynamic lateral: 6 µm/m N
  • Stylus type: Spherical
  • Stylus tip radius: R 18 µm
  • Tracking force range: 3,0-5,0 g (30-50 mN)
  • Tracking force recommended: 4,0 g (40 mN)
  • Tracking angle: 20°
  • Internal impedance, DC resistance: 1000 Ohm
  • Internal inductance: 580 mH
  • Recommended load resistance: 47 kOhm
  • Recommended load capacitance: 200-400 pF
  • Compatibility with the cartridges: GT
Add to Cart

We're sorry, only of this item available



Call a Sales Pro at 800-356-5844 for more information

© 2016 Full Compass Systems, LTD  9770 Silicon Prairie Parkway, Madison, WI 53593  All rights reserved.

We are not responsible for typographical errors in pricing or product specification
inaccuracies in our catalog or web site. Prices are subject to change without notice.